Description
Abstract In the electrochemical reduction of CO2, copper electrodes are well known to be active and selective for a variety of products, depending on process conditions. However, the effect of feed composition on performance has not been extensively investigated, especially with respect to the conversion of CO2to CO. We now show for copper electrodes in a porous tubular configuration (Hollow Fiber Electrodes, HFEs) at a relatively low working potential (−1.1 V vs Ag/AgCl),that an increasing concentration of CO in the feed results in a decreasing CO2conversion rate to CO. Contrary, it is observed that the concomitant hydrogen production rate does not depend on the concentration of CO in the feed. These observations are in good agreement with thermodynamic predictions applying the equation for the Gibbs energy of reaction. On the basis of this conclusion, we anticipate that mass transfer limitations are minimized by the tubular morphology and flow-through mode of operation. Most importantly, this study shows the necessity of a low CO concentration in the feed, to obtain a high CO2conversionrate.Period | 12 Jan 2022 |
---|---|
Type of journal | Journal |
ISSN | 2698-5977 |
Degree of Recognition | International |
Keywords
- co-feed
- convective reactant supply
- copper hollow fiber electrode
- copper
- electrochemical CO conversion
- electrochemical CO2 conversion
Documents & Links
Related content
-
Research output
-
Optimizing temperature treatment of copper hollow fibers for the electrochemical reduction of co2 to co
Research output: Contribution to journal › Article › Academic › peer-review
-
Conversion of a CO-CO2 co-feed with a porous tubular copper catalyst at low potential
Research output: Contribution to journal › Article › Academic › peer-review