Faculty of Engineering Technology

Research Output 1975 2020

Filter
Chapter
1994

Development of a zoom lens system for laser cutting applications

Arai, T., Beckmann, L. H. J. F. & Marten, O., 1994, Laser Material Processing. Springer, p. -

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Een keten van universitaire ervaring

Ingen housz, A. J., 1994, Afscheidscolloqium. Enschede: Universiteit Twente, p. 1-16

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Energie en milieu in de industrie

Hirs, G., 1994, Pato cursus. Enschede: PATO, p. -

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Evaluatie van de UFITT

de Vries, J., Grady, J. H., Zwaagstra, A. D. P. & Lemmers, L. G., 1994, The UFITT Prostheses. An open through knee prostheses with adjustable stabilization. Enschede: R.G. Lemmers, p. 121-129 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Flexible manufacturing systems - FMS

Meester, G. J., 1994, Vraagbaak voor inkoop en logistiek. Alphen aan den Rijn, 9e aanvulling: Samson BedrijfsInformatie, p. 1-5

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Flue gas emissions form fluidized bed combustion

Bramer, E. A., 1994, Atmospheric fluidized bed coal combustion: research, development and application. Amsterdam: Elsevier, p. 51-103

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

8 Citations (Scopus)

Frictional heating of elliptic contacts

Bos, J. & Moes, H., 1994, Dissipative processes in Tribology: Proceedings of the 20th Leeds-Lyon Symposium on Tribology held in the Laboratoire de Mécanique des Contacts, Institut National des Sciences Appliquées de Lyon, 7-10 September 1993. Dowson, D., Taylor, C. M., Childs, T. H. C., Godett, M. & Dalmaz, G. (eds.). Amsterdam: Elsevier Science, p. 491-500 (Tribology Series; vol. 27).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

heat generation
heating
flash
boundary lubrication
Peclet number

Gantt chart- of strokenplanning

Meester, G. J., 1994, Vraagbaak voor inkoop en logistiek. Alphen aan den Rijn, 10e aanvulling: Samson BedrijfsInformatie, p. 1-5

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Gasreiniging met de roterende deeltjes scheider

van der Velde, H. & Bramer, E. A., 1994, OSPT Procestechnologie: AIO-onderzoek in mini-posters. Oldenzaal: Dinkeldruk BV, p. 252-252 1 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Laser beam hardening: Transferability of machining parameters

Meijer, J., Kuilboer, R., Kirner, P. K. & Rund, M., 1994, Proceedings of the LANE '94, vol 1. Meisenbach Bamberg: Eds. M. Geiger and F. Vollertsen, p. 243-252

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

3 Citations (Scopus)

Modeling N2O/NO formation and reduction during combustion of char

Beerling, E. E., Brem, G., Bramer, E. A. & Valk, M., 1994, Atmospheric Fluidized Bed Coal Combustion: Research, Development and Application. Valk, M. (ed.). Amsterdam: Elsevier, p. 291-315 (Coal Science and Technology; vol. 22).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

combustion
modeling
temperature
limestone
coal

Multi-resource Planning

Meester, G. J., 1994, Vraagbaak voor inkoop en logistiek. Alphen aan den Rijn, 7e aanvulling: Samson BedrijfsInformatie, p. 1-5

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Multi-resource scheduling in discrete parts manufacturing

Meester, G. J. & Zijm, W. H. M., 1994, Operations research proceedings 1993. Eds. H. Dyckhoff, U. Derigs, M. Salomon and H.C. Tijms, p. 137-137 1 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

2 Citations (Scopus)

Municipal solid waste combustions

Gort, R., 1994, OSPT Procestechnologie: AIO-onderzoek in mini-posters. Oldenzaal: Dinkeldruk BV, p. 253-253 1 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

6 Downloads (Pure)

Numerical simulation of forming processes using an arbitrary Lagrangian Eulerian finite element method

van den Boogaard, A. H. & Huétink, J., 1994, DIANA Computational Mechanics ‘94: Proceedings of the First International Diana Conference on Computational Mechanics. Kusters, G. M. A. & Hendriks, M. A. N. (eds.). Kluwer, p. 225-234

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File
roll forming
finite element method
free boundaries
mesh
simulation

Numerieke stromingsmodellen voor centrifugaalpompen

Jonker, J. B., 1994, Verslag symposium De ontwerper als leidend voorwerp. Enschede: Universiteit Twente, p. 37-55

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Onderzoek knieprothese

Hendriks, P. J. H., Grootenboer, H. J., de Vries, J., Koopman, H. F. J. M. & van Wezel, L. J. M., 1994, De Appel. Enschede: Universiteit Twente, p. -

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

On the Mechanism of Cloud Cavitation - Experiment and Modelling

de Lange, D. F., de Bruin, G. J. & van Wijngaarden, L., 1994, The Second International Symposium on Cavitation: Proceedings: Tokyo, Japan, April 5-7, 1994. Tokyo: Kato H., p. 45-49 5 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Overall modelling of atmospheric fluidized bed combustionand experimental verification

Brem, G., 1994, Atmospheric fluidized bed coal combustion: research, development and application. Amsterdam: Elsevier, p. 185-225

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Preface

Valk, M., 1994, Atmospheric Fluidized Bed Coal Combustion: Research, Development and Application. Valk, M. (ed.). Amsterdam: Elsevier Science, p. v-vi (Coal Science and Technology; vol. 22).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Programma's van aanpak

Blauw, J. N. & Bossink, B. A. G., 1994, Handboek Integrale Kwaliteitszorg. Deventer: Kluwer, p. 1-23 23 p.

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Scheduling a single machine with release dates, due dates and family setup times

Schutten, J. M. J. & Zijm, W. H. M., 1994, Operations research proceedings 1993. Eds. H. Dyckhoff, U. Derigs, M. Salomon, H.C. Tijms, p. 141-141 1 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Staal

Beyer, J., 1994, Handboek Technische materialen. Alphen aan de Rijn: Samson/Stam, p. 1-27

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Stronger lagrangian bounds by use of slack variables with application to machine scheduling problems

Hoogeveen, J. A. & van de Velde, S. L., 1994, Operations Research Proceedings 1993. Eds. H. Dyckhoff, U. Derigs, M. Salomon and H.C. Tijms, p. 129-129 1 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Theory and practice of cross-border cooperation of local governments: the case of the Euregio between Germany and The Netherlands

van der Veen, A., 1994, Regional networks, border regions and European integration. Cappellin, R. & Batey, P. W. (eds.). London: Pion Limited, p. 89-95 7 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Two-Dimensional Horizontal and Weakly Three-Dimensional Models of Sediment Transport due to Waves and Currents

de Vriend, H. J., 1994, Coastal, Estuarial and Harbour Engineer's Reference Book (edited by M.B. Abbott and W.A. Price). London: Chapman & Hall, p. 215-238 24 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

1414 Citations (Scopus)

Vulnerability refined: analysing full flood impacts

Green, C., Wierstra, E., Penning, P. & van der Veen, A., 1994, Floods Across Europe. Penning-Rowsell, E. C. & Fordham, M. (eds.). London: Middelsex University Press, p. 32-68 37 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

1995

Automated materials handling - AMH

Meester, G. J., 1995, Vraagbaak voor inkoop en Logistiek (11e losbladige aanvulling). Alphen aan de Rijn: Samson BedrijfsInformatie, p. 1-5

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Computer aided manufacturing - CAM

Meester, G. J., 1995, Vraagbaak voor inkoop en Logistiek (13e losbladige aanvulling). Alphen aan de Rijn: Samson BedrijfsInformatie, p. 1-5

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Computer integrated manufacturing and operations research

Zijm, W. H. M., 1995, De OR techniek als onderdeel van de integrale logistiek, N.M. van Dijk en W. Bastiaan (eds.). Amsterdam: Universiteit van Amsterdam, p. 31-39

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Computer integrated manufacturing - CIM

Meester, G. J., 1995, Vraagbaak voor inkoop en Logistiek, (12e losbladige aanvulling). Alphen aan de Rijn: Samson BedrijfsInformatie, p. 1-5

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Cross-border Cooperation and European Regional Policy

Boot, D. J. & van der Veen, A., 1995, in: H. Eskelinen, F. Snickars (eds.), Competitive European Peripheries. Berlin: Springer, p. 75-94 20 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Cyclone dipleg flow effects

Bouma, J. H., 1995, OSPT Procestechnologie: PhD-projects in miniposter form. Oldenzaal: Dinkeldruk BV, p. 267-267 1 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Cyclonic smal particle reactor with integrated filter

van der Velde, H. & Bramer, E. A., 1995, OSPT Procestechnologie: PhD-projects in miniposter form. Oldenzaal: Dinkeldruk BV, p. 264-264

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

43 Citations (Scopus)

Design and operational control of an AGV system

Mantel, R. & Landeweerd, H. R. A., 1995, Progress in Material Handling Research, R.J. Graves, L.F. McGinnis, D.J. Medeiros, R.E. Ward and M.R. Wilhelm (Eds.). p. 309-323

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Deterministic machine scheduling

van de Velde, S. L., 1995, Optimization models and Concepts in Production Management. Brandimarte, P. & Villa, A. (eds.). London, UK: Gorden and Breach Publishers, p. 1-43 339 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

20 Downloads (Pure)

Dynamics of large-scale bed forms in coastal seas

de Swart, H. E. & Hulscher, S. J. M. H., 1995, Nonlinear dynamics and pattern formation in the natural environment. Doelman, A. & A. van Harten, (eds.). Harlow, Essex, UK: Longman, p. 315-331 17 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

File

Enhanced removal of organic contaminants by solvent flushing

Augustijn, D. C. M. & Rao, P. S. C., 1995, Emerging Technologies in Hazardous Waste Management V. Tedder, D. William & Frederick G. Pohland (eds.). Washington, USA: American Chemical Society, p. 224-236 13 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Exergy analysis and life-cycle assessment. Application to the industrial processes

Korobitsyn, M. A., 1995, OSPT procestechnologie: PhD-projects in miniposter form. Oldenzaal: Dinkeldruk BV, p. 268-268

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Exergy analysis in the industry

Cornelissen, R., 1995, OSPT Procestechnolige: PhD-projects in miniposter form. Oldenzaal: Dinkeldruk BV, p. 266-266

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Extending existing lot streaming techniques

Weeda, P. J., 1995, Proceedings of the 13th International Conference on Production Research, E.M. Dar-El, R. Karni and Y.T. Herer (eds.). London: Freund Publishing House, p. 408-410

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

7 Citations (Scopus)

Flue Gas Emissions from Fluidized Bed Combustion

Bramer, E. A., 1995, Atmospheric Fluidized Bed Coal Combustion: Research, Development and Application. Valk, M. (ed.). Amsterdam: Elsevier Science, p. 51-103 (Coal Science and Technology; vol. 22).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

combustion
acid rain
pollution control
limestone
coal

Interactive feature definition

Salomons, O. W., van Slooten, F., Jonker, H. J., van Houten, F. J. A. M. & Kals, H. J. J., 1995, Advanced CAD/CAM Systems, State-of-the-art and future trends in feature technology, Editors: R. Soenen and G.J. Olling, 1994. London: Chapman & Hall, p. 144-160

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Manufacturing eduction in the Netherlands, SME

Ponsen, J. M. & Kals, H. J. J., 1995, Manufacturing Education in the 21st Century, Editors: D.L. Wells, K.S. Taranan, W.L. Williamson. Dearborn, Michigan, USA: Published by the Society of Manufacturing Engineers, p. 283-301

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Municipal solid waste combustion

Gort, R., 1995, OSPT Procestechnologie: PhD-projects in miniposter form. Oldenzaal: Dinkeldruk BV, p. 269-269

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

8 Downloads (Pure)

On a Dirichlet problem related to the invertibility of mappings arising in 2D grid generation problems

Clement, P., Hagmeijer, R. & Sweers, G., 1995, Elliptic and parabolic problems : Pont-à-Mousson 1994. Harlow: Longman, p. 67-83

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

File

Operational control of an automated storage/retrieval system

van den Berg, J. P., 1995, Progress in Material Handling Research, R.J. Graves, L.F. McGinnis, D.J. Medeiros, R.E. Ward and M.R. Wilhelm (eds.). p. 481-496

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Press brake bending: tools and accessories

Kroeze, B., Streppel, A. H. & Lutters, D., 1995, International Metalworking Update 1995/96. London: Kensington Publications Limited, p. 121-126

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Roterende deeltjesscheider als nieuwe filtertechniek

Brouwers, J. J. H., 1995, Industiele luchtverontreinigingen, Technieken voor bestrijding en preventie. Alphen aan de Rijn: Samson H.D. Tjeenk Willink, p. 77-97

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

The technological universe

Tijmes, P. & Boersma, J. M., 1995, Ecology, technology and Culture. Cambridge: The White Horse Press, p. 247-261

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic