Faculty of Engineering Technology

Research Output 1975 2020

Filter
Conference contribution
2019
13 Downloads (Pure)

A DEM investigation of the shearing behaviour of non-active clays

Pagano, A. G., Magnanimo, V. & Tarantino, A., 25 Jun 2019, 7th International Symposium on Deformation Characteristics of Geomaterials, IS-Glasgow 2019. Ibraim, E. & Tarantino, A. (eds.). EDP Sciences, 14003. (E3S Web of Conferences; vol. 92).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Shearing
digital elevation model
Clay
clay
shear test
10 Downloads (Pure)

Adequate Tacit Knowledge Management for Railways: A Conceptual Framework

Abbas, Y. & Rajabalinejad, M., 2019, Proceedings of the 29th European Safety and Reliability Conference. Beer, M. & Zio, E. (eds.). European Safety and Reliability Association, p. 2289-2296

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
2 Downloads (Pure)

Aircraft engineering: An interdisciplinary minor module

Gommer, E. M. & de Boer, A., 28 Jan 2019, Proceedings of the 14th International CDIO Conference. Kanazawa: CDIO, 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
aircraft
engineering
student
teamwork
bachelor
1 Citation (Scopus)

A Meta-Model to Connect Model-based Systems Engineering with Product Data Management by Dint of the Blockchain

Heber, D. T. & Groll, M. W., 8 May 2019, 2018 International Conference on Intelligent Systems (IS). Martins, J., Jotsov, V., Bierwolf, R., Mendonca, J. P., Jardim-Goncalves, R. & Marques, M. (eds.). IEEE, p. 280-287 8 p. 8710527

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Systems engineering
Information management
Pulse width modulation
Electronic equipment
18 Downloads (Pure)

A New Adaptive E-Learning Concept for Multidisciplinary Learning Environments

Loendersloot, R. & Martinetti, A., 25 Jun 2019, Proceedings of the 15th International CDIO conference. Bennedsen, J., Birkkjaer Lauritsen, A., Edstrom, K., Kuptasthien, N., Roslof, J. & Songer, R. (eds.). Aarhus: University of Aarhus, 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
learning environment
learning
student
electronic learning
learning objective

Antifragility as a means to utilize uncertainty in product development decisions

de Lange, J., Lutters, E., Kennon, D. & Schutte, C. S. L., 30 Jan 2019, International Conference on Competitive Manufacturing (COMA 19) Proceedings. Dimitrov, D., Hagendorn-Hansen, D. & von Leipzig, K. (eds.). Stellenbosch, p. 450-455 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Product development
Uncertainty
Incomplete information
Evaluation
Requirements specification

A pure-inertia method for dynamic balancing of symmetric planar mechanisms

de Jong, J. J., Wu, Y., Carricato, M. & Herder, J. L., 2019, Advances in Robot Kinematics 2018: International Symposium on Advances in Robot Kinematics. Lenarcic, J. & Parenti-Castelli, V. (eds.). Springer, p. 277-284 (Springer Proceedings in Advanced Robotics; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Angular momentum
Mirrors

Are ankle muscle responses in balance recovery hard-wired?

Vlutters, M., van Asseldonk, E. & van der Kooij, H., 1 Jan 2019, Converging Clinical and Engineering Research on Neurorehabilitation III: Proceedings of the 4th International Conference on NeuroRehabilitation (ICNR2018), October 16-20, 2018, Pisa, Italy. Masia, L., Micera, S., Akay, M. & Pons, J. L. (eds.). Cham: Springer, p. 287-290 4 p. (Biosystems and Biorobotics; vol. 21).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Muscle
Recovery
Chemical activation
4 Downloads (Pure)

A Systemic Approach for Safe Integration of Products and Systems

Rajabalinejad, M., 24 Mar 2019, PESARO 2019: The Ninth International Conference on Performance, Safety and Robustness in Complex Systems and Applications. Rajabalinejad, M. (ed.). Valencia, Spain: IARIA/Thinkmind, p. 28-32 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
7 Downloads (Pure)

CFD Simulation of Evaporating Electrically Charged Sprays in Food Chilling Warehouses

Brentjes, A., Pozarlik, A. K. & Brem, G., Jun 2019, VIII International Conference on Computational Methods for Coupled Problems in Science and Engineering: COUPLED PROBLEMS 2019. Onate, E., Papadrakakis, M. & Schrefler, B. (eds.). p. 634-644 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File
Chilling
Warehouses
Computational fluid dynamics
Cooling
Evaporation

Constitutive Relations from Particle Simulations

Luding, S., 1 Jan 2019, Desiderata Geotechnica. Wu, W. (ed.). Springer Verlag, p. 86-92 7 p. (Springer Series in Geomechanics and Geoengineering).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fluids
critical state
fluid
Jamming
strain rate
22 Downloads (Pure)

Design of a large stroke flexure-based suspension for an iron core torque motor

Naves, M., Nijenhuis, M., Hakvoort, W. B. J. & Brouwer, D. M., Jun 2019, EUSPEN's 19th International Conference & Exhibition, Bilbao, ES, June 2019. Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). EUSPEN, p. 52-55 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
torque motors
Torque motors
flexing
strokes
Suspensions
41 Downloads (Pure)

Discrete particle simulation of the spreading process in additive manufacturing

Shaheen, M. Y., Thornton, A. R., Luding, S. & Weinhart, T., 2019, Proceedings of the 8th International Conference on Discrete Element Methods (DEM8).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File
1 Citation (Scopus)
7 Downloads (Pure)

Dynamic Analysis and Control of an Antagonistically Actuated Tensegrity Mechanism

van Riesen, A., Furet, M., Chevallereau, C. & Wenger, P., 1 Jan 2019, ROMANSY 22 – Robot Design, Dynamics and Control: Proceedings of the 22nd CISM IFToMM Symposium, June 25-28, 2018, Rennes, France. Arakelian, V. & Wenger, P. (eds.). Springer, p. 481-490 10 p. (CISM International Centre for Mechanical Sciences, Courses and Lectures; vol. 584).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Tensegrity
Torque control
Dynamic Control
Dynamic Analysis
Dynamic analysis

Editorial: Design Innovation and Philosophy of Technology: the Practical Turn

Eggink, W. & Dorrestijn, S., 20 Jun 2019, Academy for Design Innovation Management Conference: Research perspectives in the era of Transformations. de Bont, C., Gemser, G. & Bohemia, E. (eds.). London, 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Innovation
Toolkit
Conceptual framework
Social innovation

Experimental investigation of pinching phenomena in cold rolling of thin steel sheets

Cometa, A., Geijselaers, H. J. M., Van Den Boogaard, A. H., Wentink, D. J., Hol, C. W. J., Jacobs, L. J. M. & Kampmeijer, L., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). American Institute of Physics, 040026. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

cold rolling
steel
defect
mill
steels
14 Downloads (Pure)

Flexure mechanism with increased dynamic performance by overconstraining using viscoelastic material

Klein Avink, S., Nijenhuis, M., Dierkes, W., Noordermeer, J. & Brouwer, D., Jun 2019, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019. Nisbet, C., Leach, R. K., Billington, D. & Phillips, D. (eds.). EUSPEN, p. 82-85 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
flexing
stiffness
Stiffness
Elastomers
elastomers
1 Downloads (Pure)

How a Tangible User Interface Contributes to Desired Learning Outcomes of the Virtual River Serious Game

den Haan, R. J., van Dijk, J., Baart, F., van der Voort, M. & Hulscher, S., 1 Jan 2019, HCI in Games: First International Conference, HCI-Games 2019, Held as Part of the 21st HCI International Conference, HCII 2019, Orlando, FL, USA, July 26–31, 2019, Proceedings. Fang, X. (ed.). Cham: Springer, p. 288-306 19 p. (Lecture Notes in Computer Science; vol. 11595).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Tangible User Interface
Serious Games
User interfaces
Rivers
Game
1 Citation (Scopus)

How to manage and model unstructured business processes: A proposed list of representational requirements

Allah Bukhsh, Z., van Sinderen, M., Sikkel, K. & Quartel, D., 18 Jan 2019, E-Business and Telecommunications: 14th International Joint Conference, ICETE 2017, Revised Selected Paper. Obaidat, M. S. & Cabello, E. (eds.). Springer, p. 81-103 23 p. (Communications in Computer and Information Science; vol. 990).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Business Process
Requirements
Industry
Notation
Business Model

Measuring the suitability of rooms for higher education

Oude Vrielink, R. A., Nijhuis-Boer, V. M., Hans, E. W. & van Hillegersberg, J., 4 Mar 2019, ICEIT 2019: Proceedings of the 2019 8th International Conference on Educational and Information Technology. Association for Computing Machinery (ACM), p. 120-123 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Education
Curricula

Modelling integral risk assessment (MOIRA): Experiments on the Dutch railway departure process

Schuitemaker, K. & Bonnema, G. M., 4 Jul 2019, 2019 14th Annual Conference System of Systems Engineering, SoSE 2019. IEEE, p. 272-277 6 p. 8753828

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Risk assessment
Experiments
Surveying
271 Downloads (Pure)

Modelling the past evolution of observed tidal sand waves: the role of boundary conditions

Krabbendam, J. M., Nnafie, A., Perk, L., Borsje, B. W. & de Swart, H. E., 2019, International conference MARID VI, 1-3 April 2019, Book of Abstracts. Lefebvre, A., Garlan, T. & Winter, C. (eds.). Bremen: Bordeaux University - SHOM, p. 141-146

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File

Multi-scale modelling of the human neuromuscular system for symbiotic human-machine motor interaction

Sartori, M., Durandau, G., van der Kooij, H. & Farina, D., 1 Jan 2019, Converging Clinical and Engineering Research on Neurorehabilitation III: Proceedings of the 4th International Conference on NeuroRehabilitation (ICNR2018), October 16-20, 2018, Pisa, Italy. Masia, L., Micera, S., Akay, M. & Pons, J. L. (eds.). Springer, p. 167-170 4 p. (Biosystems and Biorobotics; vol. 21).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Neurons
Muscle
Neurophysiology
Mechanics
Robotics

On the Choice of Basis in Proper Orthogonal Decomposition-Based Surrogate Models

de Gooijer, B. M., Hazrati Marangalou, J., Geijselaers, B. & van den Boogaard, A. H., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming: ESAFORM 2019. Galdos, L., Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Madariaga, A. & Saez de Buruaga, M. (eds.). AIP, 6 p. (AIP Conference Proceedings; vol. 2113, no. 010001).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Decomposition
Metal forming
Costs
11 Downloads (Pure)

Optimal Design of Tensegrity Mechanisms Used in a Bird Neck Model

Furet, M., van Riesen, A., Chevallereau, C. & Wenger, P., 1 Jan 2019, EuCoMeS 2018: Proceedings of the 7th European Conference on Mechanism Science. Corves, B., Wenger, P. & Hüsing, M. (eds.). p. 365-375 11 p. (Mechanisms and Machine Science; vol. 59).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Hand tools
Birds
Stiffness
Optimal design
10 Downloads (Pure)

Paradigm of Safety by Design

Rajabalinejad, M., 2019, International Cross-industry Safety Conference (ICSC) - European STAMP Workshop & Conference (ESWC) (ICSC-ESWC 2018). Karanikas, N., Chatzimichailidou, M. M. & Rejzek, M. (eds.). Amsterdam: MATEC Web of Conferences, Vol. 273. 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File

Process-Induced Anomalous Current Transport in Graphene/InA1N/GaN Heterostructured Diodes

F Satterthwaite, P., S Yalamarthy, A., Vaziri, S., Muñoz Rojo, M., Pop, E. & G Senesky, D., 2019, (Accepted/In press) 2019 IEEE International Reliability Physics Symposium (IRPS). Piscataway, NJ: IEEE

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

graphene
diodes
nitrides
leakage
thermionic emission

Reconstructing Endovascular Catheter Interaction Forces in 3D using Multicore Optical Shape Sensors

Heunis, C. M., Belfiore, V., Vendittelli, M. & Misra, S., 20 Jun 2019, (Accepted/In press) Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Catheters
Sensors
Tissue
Fiber Bragg gratings
User interfaces
2 Downloads (Pure)

Safe Integration for System of Systems: The Safety Cube Theory

Rajabalinejad, M., 2019, 2019 14th Annual Conference System of Systems Engineering (SoSE). Piscataway, NJ: IEEE, p. 323-327 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Robots
System of systems
1 Citation (Scopus)

Simple shock detector for discontinuous galerkin method

Choi, J. H., Alonso, J. J. & van der Weide, E., 1 Jan 2019, AIAA Scitech 2019 Forum: Session: Applied Computational Aerodynamics: Methods and Results III. American Institute of Aeronautics and Astronautics Inc. (AIAA)

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Galerkin methods
Detectors
Communication
Sensors
Flow of fluids
102 Downloads (Pure)

State of the art of electric Mobility as a Service (eMaaS): an overview of ecosystems and system architectures

Reyes Garcia, J. R., Lenz, G., Haveman, S. P. & Bonnema, G. M., 22 May 2019, 32nd International Electric Vehicle Symposium (EVS32).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Ecosystems

Symbitron: Symbiotic man-machine interactions in wearable exoskeletons to enhance mobility for paraplegics

van der Kooij, H., van Asseldonk, E., van Oort, G., Sluiter, V., Emmens, A., Muijzer-Witteveen, H. J. B., Tagliamonte, N. L., Tamburella, F., Pisotta, I., Masciullo, M., Arquilla, M., Molinari, M., Wu, A., Ijspeert, A., Dzeladini, F. F., Thorsteinsson, F., Arami, A., Burdet, E., Huang, H. Y., Gregoor, W. & 1 othersMeijneke, C., 1 Jan 2019, Wearable Robotics: Challenges and Trends: Proceedings of the 4th International Symposium on Wearable Robotics, WeRob2018, October 16-20, 2018, Pisa, Italy. Carrozza, M. C., Micera, S. & Pons, J. L. (eds.). Cham: Springer, p. 361-364 4 p. (Biosystems and Biorobotics; vol. 22).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Human computer interaction

Tailoring Material Scatter for Metal Forming Processes based on Inverse Robust Optimization

Nejadseyfi, O., Geijselaers, B. & van den Boogaard, A. H., 8 May 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming. AIP Publishing LLC, Vol. 2113. 6 p. (AIP conference proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Metal forming
Costs
Specifications
27 Downloads (Pure)

The effect of assist-as-needed support on metabolic cost during gait training of chronic stroke patients in LOPESII

Fleerkotte, B. M., Buurke, J. H., van Asseldonk, E. H. F. & Rietman, J. S., 1 Jan 2019, Converging Clinical and Engineering Research on Neurorehabilitation III: Proceedings of the 4th International Conference on NeuroRehabilitation (ICNR2018), October 16-20, 2018, Pisa, Italy. Masia, L., Micera, S., Akay, M. & Pons, J. L. (eds.). Cham: Springer, p. 415-419 5 p. (Biosystems and Biorobotics; vol. 21).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Robotics
Costs
Patient rehabilitation
26 Downloads (Pure)

The influence of flexibility on the force balance quality: a frequency domain approach

de Jong, J. J., Schaars, B. E. M. & Brouwer, D. M., 3 Jun 2019, Proceedings of the 19th international conference of the European Society for Precision Engineering and Nanotechnology. p. 546-549 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Bandwidth
Controllers
Probability density function
Manipulators
Transfer functions
24 Downloads (Pure)

Towards the development of a hybrid methodology of head checks in railway infrastructure

Meghoe, A., Jamshidi, A., Loendersloot, R. & Tinga, T., 2 Jul 2019, Railway Engineering 2019: 15th International Conference & Exhibition. UKRRIN, p. 1-12 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Rails
Electric current measurement
Eddy currents
Cracks
Physics
20 Downloads (Pure)

Training balance recovery in people with incomplete SCI wearing a wearable exoskeleton

van Asseldonk, E. H. F., Emmens, A., Brug, T. J. H., Pisotta, I., Arquilla, M., Tamburella, F., Masciullo, M., Tagliamonte, N. L., Valette, R., Molinari, M. & van der Kooij, H., 1 Jan 2019, Wearable Robotics: Challenges and Trends: Proceedings of the 4th International Symposium on Wearable Robotics, WeRob2018, October 16-20, 2018, Pisa, Italy. Carrozza, M. C., Micera, S. & Pons, J. L. (eds.). Cham: Springer, p. 334-338 5 p. (Biosystems and Biorobotics; vol. 22).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Recovery
Controllers
Robots

Turmoil Behind the Automated Wheel: An Embodied Perspective on Current HMI Developments in Partially Automated Vehicles

Boelhouwer, A., van Dijk, J. & Martens, M. H., 1 Jan 2019, HCI in Mobility, Transport, and Automotive Systems: First International Conference, MobiTAS 2019, Held as Part of the 21st HCI International Conference, HCII 2019, Orlando, FL, USA, July 26-31, 2019, Proceedings. Krömker, H. (ed.). Cham: Springer, p. 3-25 23 p. (Lecture Notes in Computer Science; vol. 11596).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Wheel
Driver
Wheels
Railroad cars
Automation

Upscaling laser-induced periodic surface structures (LIPSS) manufacturing by defocused laser processing

Mezera, M. & Römer, G. R. B. E., 4 Mar 2019, Laser-based Micro- and Nanoprocessing XIII. Klotzbach, U., Watanabe, A. & Kling, R. (eds.). Washington DC: SPIE, p. 1-11 11 p. 109060U. (Proceedings of the SPIE; vol. 10906).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

manufacturing
lasers
periodic variations
atomic force microscopy
laser beams

User Involvement, Device Safety, and Outcome Measures During Development of Walking Exoskeletons: Current Practices

Ármannsdóttir, A. L., Manrique-Sancho, M. T., Moreno, J. C., del-Alma, A. J., Beckerle, P., van Asseldonk, E. H. F., Veneman, J. F. & Briem, K., 30 Jul 2019, Inclusive Robotics for a Better Society: Selected Papers from INBOTS Conference 2018, 16-18 October, 2018, Pisa, Italy. Pons, J. L. (ed.). Springer International Publishing AG, p. 157-163 7 p. (Biosystems and Biorobotics; vol. 25).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Safety devices
Product development
Patient rehabilitation
Standardization
Robots

Virtual dashboards in pilot production environments

Lutters, E., de Lange, J. & Damgrave, R. G. J., 30 Jan 2019, International Conference on Competitive Manufacturing (COMA 19) Proceedings. Dimitrov, D., Hagendorn-Hansen, D. & von Leipzig, K. (eds.). Stellenbosch, p. 22-27 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Decision making
Arsenals
Augmented reality
Remote control
Virtual reality
2018
3 Downloads (Pure)

3D-printed flexure-based finger joints for anthropomorphic hands

Garcia Rodriguez, L. A., Naves, M. & Brouwer, D. M., 1 Oct 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 1437-1442 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Hinges
Stiffness
Bearing capacity
Prosthetics
Loads (forces)
8 Downloads (Pure)

A Beating Heart Testbed for the Evaluation of Robotic Cardiovascular Interventions

Vrooijink, G. J., Irzan, H. & Misra, S., 9 Oct 2018, BIOROB 2018: 7th IEEE International Conference on Biomedical Robotics and Biomechatronics. Piscataway, NJ: IEEE Computer Society, p. 1076-1082 7 p. 8487725

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Testbeds
Robotics
Catheters
Repair
Ablation
9 Downloads (Pure)

A constitutive law based on the self-consistent homogenization theory for improved springback simulation of a dual-phase steel

Torkabadi, A., Perdahcioǧlu, E. S. & van den Boogaard, A. H., 6 Aug 2018, Journal of Physics: Conference series. 1 ed. Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
homogenizing
steels
Bauschinger effect
unloading
simulation
8 Downloads (Pure)

Active control of noise and vibration for time-varying transfer paths

Berkhoff, A. P., 2018, Speech Communication; 13th ITG-Fachtagung Sprachkommunikation. Doclo, S. (ed.). VDE Verlag, p. 21-25 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Acoustic noise
Vibrations (mechanical)
Active noise control
Vibration control
Geometry

A double wake model for interacting boundary layer methods

Vaithiyanathasamy, R., Özdemir, H., Bedon, G. & van Garrel, A., 1 Jan 2018, 2018 Wind Energy Symposium. American Institute of Aeronautics and Astronautics Inc. (AIAA)

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Boundary layers
Airfoils
Pressure distribution
Aerodynamics
Viscous flow

A Labview/Arduino Measurement System for Shape Memory Alloy Wires

Driesen, J. B., Fischer, C., Caselato de Sousa, G. L., de Sousa Santos, O., Loendersloot, R., Rade, D. A., Martins, C. A. & Góes, L. C. S., 12 Nov 2018, 2018 13th IEEE International Conference on Industry Applications (INDUSCON). IEEE, p. 1179-1186

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Shape memory effect
Wire
Computer programming languages
Visualization
Phase transitions

A large range spatial linear guide with torsion reinforcement structures

Rommers, J., Naves, M., Brouwer, D. M. & Herder, J. L., 1 Jan 2018, ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 42nd Mechanisms and Robotics Conference . American Society of Mechanical Engineers (ASME), Vol. 5A. 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Reinforcement
Torsional stress
Torsion
Stiffness
Leaf springs
1 Citation (Scopus)

A master-curve for the shear degradation of rolling bearing greases

Zhou, Y., Bosman, R. & Lugt, P. M., 1 Jan 2018, 73rd Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2018. Society of Tribologists and Lubrication engineers (STLE), p. 275-277 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)

An absolute interface coordinates floating frame of reference formulation for plates

van den Belt, M., Schilder, J. P. & Brouwer, D. M., 1 Jan 2018, Proceedings of the international conference on noise and vibration engineering (isma2018) and the international conference on uncertainty in structural dynamics (usd2018). Moens, D., Desmet, W., Pluymers, B. & Rottiers, W. (eds.). KU Leuven - Departement Werktuigkunde, p. 2559-2566 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

floating
formulations
coordinate transformations
flexing