Research Output 1985 2019

2019

An analytical model to study the effect of asperity geometry on forces in ploughing by an elliptical asperity

Mishra, T., de Rooij, M., Shisode, M., Hazrati, J. & Schipper, D. J., 1 Sep 2019, In : Tribology international. 137, p. 405-419 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

plowing
Analytical models
Geometry
Substrates
geometry

A noninvasive MRI based approach to estimate the mechanical properties of human knee ligaments

Naghibi, H., Mazzoli, V., Gijsbertse, K., Hannink, G., Sprengers, A., Janssen, D., van den Boogaard, T. & Verdonschot, N., May 2019, In : Journal of the mechanical behavior of biomedical materials. 93, p. 43-51 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Ligaments
Magnetic resonance imaging
Mechanical properties
Stiffness
Bone

Characterization of interfacial shear strength and its effect on ploughing behaviour in single-asperity sliding

Mishra, T., de Rooij, M., Shisode, M., Hazrati, J. & Schipper, D. J., 15 Oct 2019, In : Wear. 436-437, 203042.

Research output: Contribution to journalArticleAcademicpeer-review

plowing
shear strength
Shear strength
sliding
Friction
8 Downloads (Pure)

Control of ring rolling with variable thickness and curvature

Arthington, M., Havinga, J. & Duncan, S., 6 Feb 2019, In : International journal of material forming.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Forging
Hardware
Metals
Video cameras
Feedback control

Experimental investigation of pinching phenomena in cold rolling of thin steel sheets

Cometa, A., Geijselaers, H. J. M., Van Den Boogaard, A. H., Wentink, D. J., Hol, C. W. J., Jacobs, L. J. M. & Kampmeijer, L., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). American Institute of Physics, 040026. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

cold rolling
steel
defect
mill
steels
2 Downloads (Pure)
Open Access
File
Metal forming
State estimation
Industrial plants
Interpolation
Physics
9 Downloads (Pure)
Open Access
File
Finite Element Modeling
Buoyancy
Pipe
Contacts (fluid mechanics)
Moment

Laser assisted forming and phase reversal heat treatment of metastable austenitic stainless steel

Kooiker, H., 17 May 2019, Enschede: University of Twente. 129 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

2 Citations (Scopus)
36 Downloads (Pure)

Microscopic investigation of damage mechanisms and anisotropic evolution of damage in DP600

Aşık, E. E., Perdahcıoğlu, E. S. & van den Boogaard, A. H., 2 Jan 2019, In : Materials Science and Engineering A. 739, p. 348-356 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Martensite
damage
voids
Steel
martensite
1 Citation (Scopus)
2 Downloads (Pure)

Modelling of ploughing in a single-asperity sliding contact using material point method

Mishra, T., Ganzenmüller, G. C., de Rooij, M., Shisode, M., Hazrati, J. & Schipper, D. J., 15 Jan 2019, In : Wear. 418-419, p. 180-190 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

plowing
sliding contact
Substrates
Friction
sliding

On the Choice of Basis in Proper Orthogonal Decomposition-Based Surrogate Models

de Gooijer, B. M., Hazrati Marangalou, J., Geijselaers, B. & van den Boogaard, A. H., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming: ESAFORM 2019. Galdos, L., Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Madariaga, A. & Saez de Buruaga, M. (eds.). AIP, 6 p. (AIP Conference Proceedings; vol. 2113, no. 010001).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Decomposition
Metal forming
Costs
41 Downloads (Pure)

Optimal design of laminated composites with focus on aircraft structures

Farzan Nasab, F., 29 Mar 2019, Enschede: University of Twente. 196 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

Open Access
File
Laminated composites
Aircraft
Composite structures
Laminates
Skin
9 Downloads (Pure)

Robust Optimization and Tailoring of Scatter in Metal Forming Processes

Nejadseyfi, O., 25 Aug 2019, Enschede: University of Twente. 179 p.

Research output: ThesisPhD Thesis - Research external, graduation UTAcademic

Open Access
File
Metal Forming
Robust Optimization
Metal forming
Scatter
Tolerance

Tailoring Material Scatter for Metal Forming Processes based on Inverse Robust Optimization

Nejadseyfi, O., Geijselaers, B. & van den Boogaard, A. H., 8 May 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming. AIP Publishing LLC, Vol. 2113. 6 p. (AIP conference proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Metal forming
Costs
Specifications
6 Downloads (Pure)

The mechanics of carbon-foams and design of module supports for the atlas-upgrade inner tracker

Toptop, K., 4 Jul 2019, Enschede: University of Twente. 188 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

Open Access
File
14 Downloads (Pure)

Tribological interactions and modelling of friction in hot stamping

Venema, J., 25 Sep 2019, Enschede: University of Twente. 124 p.

Research output: ThesisPhD Thesis - Research external, graduation UTAcademic

Open Access
File
Stamping
Wear of materials
Friction
Formability
Sheet metal
2018
1 Citation (Scopus)
68 Downloads (Pure)

A class of rate-independent lower-order gradient plasticity theories: Implementation and application to disc torsion problem

Perdahcioğlu, E. S., Soyarslan, C., Asik, E. E., van den Boogaard, T. & Bargmann, S., 14 Aug 2018, In : Materials. 11, 8, 1425.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Torsional stress
Plasticity
Hardening
Crystals
Plastic flow
9 Downloads (Pure)

A constitutive law based on the self-consistent homogenization theory for improved springback simulation of a dual-phase steel

Torkabadi, A., Perdahcioǧlu, E. S. & van den Boogaard, A. H., 6 Aug 2018, Journal of Physics: Conference series. 1 ed. Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
homogenizing
steels
Bauschinger effect
unloading
simulation
23 Downloads (Pure)

A continuum model for the effect of dynamic recrystallization on the stress-strain response

Kooiker, H., Perdahcioğlu, E. S. & van den Boogaard, A. H., 22 May 2018, In : Materials. 11, 5, 867.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Dynamic recrystallization
Strain rate
Hot working
Austenitic stainless steel
High strength steel
3 Citations (Scopus)

A crystal plasticity model for describing the anisotropic hardening behavior of steel sheets during strain-path changes

Kim, H., Barlat, F., Lee, Y., Zaman, S. B., Lee, C. S. & Jeong, Y., Dec 2018, In : International journal of plasticity. 111, p. 85-106 22 p.

Research output: Contribution to journalArticleAcademicpeer-review

Steel sheet
Plasticity
Hardening
Crystals
Stress-strain curves
1 Citation (Scopus)

A level-set-based strategy for thickness optimization of blended composite structures

Farzan Nasab, F., Geijselaers, H. J. M., Baran, I., Akkerman, R. & de Boer, A., 15 Dec 2018, In : Composite structures. 206, p. 903-920 18 p.

Research output: Contribution to journalArticleAcademicpeer-review

Composite structures
Skin
Composite materials
Global optimization
Torsional stress
29 Downloads (Pure)

Analysis of yield locus description on springback behaviour of CR700Y980T-DP steel

Grubenmann, M., Barth, K., Heingartner, J., Manopulo, N., Hora, P., Torkabadi, A., Van Den Boogaard, T. & Rösen, H., 21 Sep 2018, In : IOP Conference Series: Materials Science and Engineering. 418, 1, 012108.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
Steel
Hardening
Bending tools
Kinematics
Compaction
2 Citations (Scopus)

An insight in friction and wear mechanisms during hot stamping

Venema, J., Hazrati Marangalou, J., Matthews, D. & Van Den Boogaard, T., 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). Trans Tech Publications Ltd, Vol. 767 KEM. p. 131-138 8 p. (Key Engineering Materials; vol. 767 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stamping
Wear of materials
Friction
Sheet metal
Metal coatings
17 Downloads (Pure)

Deformation mechanism in compression molding of discontinuous thermoplastic composites

Ali, W., Rasheed, M. I. A., Sachs, U., Geijselaers, H. J. M. & Akkerman, R., 30 May 2018. 2 p.

Research output: Contribution to conferencePaperAcademicpeer-review

Open Access
File
Compression molding
Thermoplastics
Fibers
Composite materials
Fiber reinforced materials
7 Downloads (Pure)

Evaluation and assessment of non-normal output during robust optimization

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2018, In : Structural and multidisciplinary optimization. 1

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Robust Optimization
Output
Metal forming
Evaluation
Normal distribution
4 Citations (Scopus)
42 Downloads (Pure)

Feedforward control of sheet bending based on force measurements

Havinga, J., van den Boogaard, T., Dallinger, F. & Hora, P., 1 Jan 2018, In : Journal of Manufacturing Processes. 31, p. 260-272 13 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Feedforward control
Force measurement
Feedback control
Deep drawing
Metal forming

First time right production of metal conveyor belts by active control

Levharkar, A., 19 Oct 2018, Enschede: University of Twente. 79 p.

Research output: ThesisPd Eng ThesisAcademic

12 Downloads (Pure)

Friction in Sheet Metal Forming: Forming Simulations of Dies in Try-Out

Sigvant, M., Pilthammar, J., Hol, J., Wiebenga, J. H., Chezan, T., Carleer, B. & Van Den Boogaard, A. H., 6 Aug 2018, Journal of Physics, Conference series. 1 ed. Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
metal forming
metal sheets
friction
tribology
simulation
33 Downloads (Pure)

Friction in Sheet Metal Forming Simulations: Modelling of New Sheet Metal Coatings and Lubricants

Sigvant, M., Pilthammar, J., Hol, J., Wiebenga, J. H., Chezan, T., Carleer, B. & Van Den Boogaard, A. H., 21 Sep 2018, In : IOP Conference Series: Materials Science and Engineering. 418, 1, 012093.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
Metal coatings
Metal forming
Sheet metal
Lubricants
Friction

Investigation of anisotropic damage evolution in dual phase steels

Asik, E. E., Perdahcioglu, E. S. & van den Boogaard, A. H., Feb 2018. 1 p.

Research output: Contribution to conferenceAbstractAcademic

steels
damage
martensite
ferrites
metal forming

INVESTIGATION OF MICROSTRUCTURAL FEATURES ON DAMAGE ANISOTROPY

Asik, E. E., Perdahcioglu, E. S. & van den Boogaard, A. H., Jul 2018, 11th Forming Technology Forum 2018. Zurich, Switzerland: IVP - ETH Zurich, p. 71-71 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Martensite
Anisotropy
Ferrite
Steel sheet
Stress-strain curves

Materials testing methods for expandable pipes

Bin Haji Nawawi, M. A., 9 May 2018, Enschede: University of Twente. 93 p.

Research output: ThesisPd Eng ThesisAcademic

28 Downloads (Pure)

Modeling crack initiation in Al-Si coating during heating/quenching phase of hot stamping process

Zaman, S. B., Hazrati Marangalou, J., de Rooij, M. B., Matthews, D. T. A., Venema, J. & van den Boogaard, A. H., 3 Jul 2018, 11th Forming Technology Forum Zurich 2018: Experimental and numerical methods in the FEM based crack prediction. Hora, P. (ed.). ETH Zurich, Switzerland, p. 87-92 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Stamping
Crack initiation
Quenching
Heating
Coatings

Multi-scale contact modeling of coated steels for sheet metal forming applications

Shisode, M., Hazrati Marangalou, J., Mishra, T., De Rooij, M. & Van Den Boogaard, T., 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). Trans Tech Publications Ltd, Vol. 767 KEM. p. 223-231 9 p. (Key Engineering Materials; vol. 767 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Steel
Metal forming
Sheet metal
Zinc
Textures

On anisotropy and non-proportional loading in damage and fracture models

van den Boogaard, A. H., Jul 2018, 11th Forming Technology Forum 2018. Zurich, Switzerland: IVP - ETH Zurich, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Anisotropy
Ductile fracture
Shear deformation
3 Citations (Scopus)
34 Downloads (Pure)

On the nonlinear anelastic behavior of AHSS

Torkabadi, A., Perdahcioğlu, E. S., Meinders, V. T. & van den Boogaard, A. H., 15 Oct 2018, In : International journal of solids and structures. 151, p. 2-8 7 p.

Research output: Contribution to journalArticleAcademicpeer-review

Unloading
unloading
Plastic deformation
nonlinearity
Nonlinearity

Propagation of variation through multi-stage metal forming processes

de Gooijer, B. M., 2018.

Research output: Contribution to conferencePosterAcademic

Propagation of variation through multi-stage metal forming processes

de Gooijer, B. M., 2018.

Research output: Contribution to conferencePosterAcademic

1 Citation (Scopus)
11 Downloads (Pure)

Robust optimization based on analytical evaluation of uncertainty propagation

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 20 Nov 2018, In : Engineering Optimization. 23 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Uncertainty Propagation
Robust Optimization
Scatter
Metamodel
Black Box
6 Downloads (Pure)

Temperature dependent micromechanics-based friction model for cold stamping processes

Wang, C., Hazrati, J., de Rooij, M. B., Veldhuis, M., Aha, B., Georgiou, E., Drees, D. & van den Boogaard, A. H., 6 Aug 2018, Journal of physics: Conference series. 1 ed. IOP Science, Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
stamping
micromechanics
metal sheets
friction
lubricants
5 Citations (Scopus)
2 Downloads (Pure)

The effects of temperature on friction and wear mechanisms during direct press hardening of Al-Si coated ultra-high strength steel

Venema, J., Hazrati Marangalou, J., Matthews, D. T. A., Stegeman, R. A. & van den Boogaard, A. H., 15 Jul 2018, In : Wear. 406-407, p. 149-155 7 p.

Research output: Contribution to journalArticleAcademicpeer-review

high strength steels
High strength steel
hardening
Hardening
friction
1 Citation (Scopus)
22 Downloads (Pure)

The evolution of mechanical properties of AISI 301 as a result of phase reversion heat treatment, experiment and modeling

Kooiker, H., Perdahcioǧlu, E. S. & van den Boogaard, T., 6 Aug 2018, In : Journal of physics: Conference series. 1063, 1, 7 p., 12106.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
heat treatment
mechanical properties
austenite
hardness
austenitic stainless steels

The Onset of Ironing during Casing Expansion

Assaad, W. A., Wilmink, D., Pasaribu, H. R. & Geijselaers, H. J. M., 2018, p. 1960.

Research output: Contribution to conferenceAbstractAcademic

Cements
Cones
Boreholes
Mechanical properties
Gases
30 Downloads (Pure)

Tool Texturing for Deep Drawing Applications

Hazrati, J., Stein, P., Kramer, P. & Van Den Boogaard, A. H., 21 Sep 2018, In : IOP Conference Series: Materials Science and Engineering. 418, 1, 012095.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
Deep drawing
Texturing
Sheet metal
Textures
Friction
161 Downloads (Pure)

Towards an accurate springback prediction: experiments and modeling

Torkabadi, A., 25 Oct 2018, Enschede: University of Twente. 133 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

Open Access
File
Unloading
Experiments
Constitutive models
High strength steel
Mechanics
2017
12 Downloads (Pure)

A continuum model accounting for the effect of the initial and evolving microstructure on the evolution of dynamic recrystallization

Kooiker, H., Perdahcioglu, E. S. & Van Den Boogaard, T., 2017, XIV International Conference on Computational Plasticity, Fundamentals and Applications, COMPLAS 2017. Onate, E., Owen, D. R. J., Peric, D. & Chiumenti, M. (eds.). International Center for Numerical Methods in Engineering, Vol. 2017-January. p. 308-318 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Dynamic Recrystallization
Dynamic recrystallization
Continuum Model
Grain Size
Austenitic stainless steel
1 Citation (Scopus)
42 Downloads (Pure)

A nonlinear dynamic corotational finite element model for submerged pipes

De Vries, F. H., Geijselaers, H. J. M., Van Den Boogaard, A. H. & Huisman, A., 12 Dec 2017, In : IOP Conference Series: Materials Science and Engineering. 276, 012030.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Pipe
Buoyancy
Gravitation
Ships
Water

Effect of flake distribution in mold on the flow during compression molding of unidirectional long fiber thermoplastic flakes

Bhakta, A., Geijselaers, H. J. M., Sachs, U., Abdul Rasheed, M. I. & van den Boogaard, A. H., 20 Aug 2017. 11 p.

Research output: Contribution to conferencePaperAcademicpeer-review

2 Citations (Scopus)
2 Downloads (Pure)

Efficient Calculation of Uncertainty Propagation with an Application in Robust Optimization of Forming Processes

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. AIP Publishing LLC, 100004. (AIP Conference Proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Function evaluation
Metal forming
Probability distributions
Mathematical models
Sampling

Efficient optimization for robust multi-stage production processes

de Gooijer, B. M., 2017.

Research output: Contribution to conferencePosterAcademic