Research Output 1985 2019

Filter
Conference contribution
2019

Experimental investigation of pinching phenomena in cold rolling of thin steel sheets

Cometa, A., Geijselaers, H. J. M., Van Den Boogaard, A. H., Wentink, D. J., Hol, C. W. J., Jacobs, L. J. M. & Kampmeijer, L., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). American Institute of Physics, 040026. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

cold rolling
steel
defect
mill
steels

On the Choice of Basis in Proper Orthogonal Decomposition-Based Surrogate Models

de Gooijer, B. M., Hazrati Marangalou, J., Geijselaers, B. & van den Boogaard, A. H., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming: ESAFORM 2019. Galdos, L., Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Madariaga, A. & Saez de Buruaga, M. (eds.). AIP, 6 p. (AIP Conference Proceedings; vol. 2113, no. 010001).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Decomposition
Metal forming
Costs

Tailoring Material Scatter for Metal Forming Processes based on Inverse Robust Optimization

Nejadseyfi, O., Geijselaers, B. & van den Boogaard, A. H., 8 May 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming. AIP Publishing LLC, Vol. 2113. 6 p. (AIP conference proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Metal forming
Costs
Specifications
2018
9 Downloads (Pure)

A constitutive law based on the self-consistent homogenization theory for improved springback simulation of a dual-phase steel

Torkabadi, A., Perdahcioǧlu, E. S. & van den Boogaard, A. H., 6 Aug 2018, Journal of Physics: Conference series. 1 ed. Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
homogenizing
steels
Bauschinger effect
unloading
simulation
2 Citations (Scopus)

An insight in friction and wear mechanisms during hot stamping

Venema, J., Hazrati Marangalou, J., Matthews, D. & Van Den Boogaard, T., 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). Trans Tech Publications Ltd, Vol. 767 KEM. p. 131-138 8 p. (Key Engineering Materials; vol. 767 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stamping
Wear of materials
Friction
Sheet metal
Metal coatings
12 Downloads (Pure)

Friction in Sheet Metal Forming: Forming Simulations of Dies in Try-Out

Sigvant, M., Pilthammar, J., Hol, J., Wiebenga, J. H., Chezan, T., Carleer, B. & Van Den Boogaard, A. H., 6 Aug 2018, Journal of Physics, Conference series. 1 ed. Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
metal forming
metal sheets
friction
tribology
simulation

INVESTIGATION OF MICROSTRUCTURAL FEATURES ON DAMAGE ANISOTROPY

Asik, E. E., Perdahcioglu, E. S. & van den Boogaard, A. H., Jul 2018, 11th Forming Technology Forum 2018. Zurich, Switzerland: IVP - ETH Zurich, p. 71-71 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Martensite
Anisotropy
Ferrite
Steel sheet
Stress-strain curves
28 Downloads (Pure)

Modeling crack initiation in Al-Si coating during heating/quenching phase of hot stamping process

Zaman, S. B., Hazrati Marangalou, J., de Rooij, M. B., Matthews, D. T. A., Venema, J. & van den Boogaard, A. H., 3 Jul 2018, 11th Forming Technology Forum Zurich 2018: Experimental and numerical methods in the FEM based crack prediction. Hora, P. (ed.). ETH Zurich, Switzerland, p. 87-92 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Stamping
Crack initiation
Quenching
Heating
Coatings

Multi-scale contact modeling of coated steels for sheet metal forming applications

Shisode, M., Hazrati Marangalou, J., Mishra, T., De Rooij, M. & Van Den Boogaard, T., 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). Trans Tech Publications Ltd, Vol. 767 KEM. p. 223-231 9 p. (Key Engineering Materials; vol. 767 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Steel
Metal forming
Sheet metal
Zinc
Textures

On anisotropy and non-proportional loading in damage and fracture models

van den Boogaard, A. H., Jul 2018, 11th Forming Technology Forum 2018. Zurich, Switzerland: IVP - ETH Zurich, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Anisotropy
Ductile fracture
Shear deformation
6 Downloads (Pure)

Temperature dependent micromechanics-based friction model for cold stamping processes

Wang, C., Hazrati, J., de Rooij, M. B., Veldhuis, M., Aha, B., Georgiou, E., Drees, D. & van den Boogaard, A. H., 6 Aug 2018, Journal of physics: Conference series. 1 ed. IOP Science, Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
stamping
micromechanics
metal sheets
friction
lubricants
2017
12 Downloads (Pure)

A continuum model accounting for the effect of the initial and evolving microstructure on the evolution of dynamic recrystallization

Kooiker, H., Perdahcioglu, E. S. & Van Den Boogaard, T., 2017, XIV International Conference on Computational Plasticity, Fundamentals and Applications, COMPLAS 2017. Onate, E., Owen, D. R. J., Peric, D. & Chiumenti, M. (eds.). International Center for Numerical Methods in Engineering, Vol. 2017-January. p. 308-318 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Dynamic Recrystallization
Dynamic recrystallization
Continuum Model
Grain Size
Austenitic stainless steel
2 Citations (Scopus)
2 Downloads (Pure)

Efficient Calculation of Uncertainty Propagation with an Application in Robust Optimization of Forming Processes

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. AIP Publishing LLC, 100004. (AIP Conference Proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Function evaluation
Metal forming
Probability distributions
Mathematical models
Sampling

Estimating product-to-product variations in metal forming using force measurements

Havinga, G. T. & Van Den Boogaard, T., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. American Institute of Physics, Vol. 1896. 070002. (AIP conference proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

metal forming
estimating
products
deep drawing
regression analysis
2 Citations (Scopus)

Implementation and application of a gradient enhanced crystal plasticity model

Soyarslan, C., Perdahcioglu, E. S., Asik, E. E., Van Den Boogaard, A. H. & Bargmann, S., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. American Institute of Physics, Vol. 1896. 160008. (AIP conference proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

plastic properties
gradients
plastics
tensors
crystals
2016

A multi-level set gradient based algorithm for buckling optimization of blended composite structures

Farzan Nasab, F., Geijselaers, H. J. M. & de Boer, A., 2016, 5th Aircraft Structural Design Conference. Manchester: Royal Aeronautical Society, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Composite structures
Buckling
Skin
Composite materials
Global optimization
2 Citations (Scopus)

Constitutive modeling of hot horming of austenitic stainless steel 316LN by accounting for recrystallization in the dislocation evolution

Kooiker, H., Perdahcioglu, E. S. & van den Boogaard, A. H., 4 Sep 2016, NUMISHEET 2016: 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. IOP, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Austenitic stainless steel
Recovery
Hot pressing
Hardening
Strain rate
50 Downloads (Pure)

Experimentation and Numerical Modeling of Forging Induced Bending (FIB) Process

Naseem, S. & van den Boogaard, A. H., 27 Apr 2016, Proceedings of the 19th International ESAFORM Conference on Material Forming. Nantes, France: American Institue of Physics, p. - (1; vol. 1769).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Forging
Numerical models
Sheet metal
Experiments
7 Citations (Scopus)
68 Downloads (Pure)

Friction and lubrication modeling in sheet metal forming simulations of a Volvo XC90 inner door

Sigvant, M., Pilthammar, J., Hol, J., Wiebenga, J. H., Chezan, A. R., Carleer, B. D., Carleer, B. D. & van den Boogaard, A. H., 12 Jun 2016, IDDRG 2016, Challenges in forming high-strength sheets. Linz: ASMET, p. 658-663

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
4 Citations (Scopus)

Friction and lubrication modelling in sheet metal forming simulations of the Volvo XC90 inner door

Sigvant, M., Pilthammar, J., Hol, J., Wiebenga, J. H., Chezan, A. R., Carleer, B. D., Carleer, B. D. & van den Boogaard, A. H., 4 Sep 2016, 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET 2016. Bristol: IOP Publishing, p. - (3; vol. 734).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Friction in sheet metal forming: simulations of the Volvo XC90 inner door

Sigvant, M., Pilthammar, J., Hol, J., Wiebenga, J. H., Chezan, A. R., Carleer, B. D., Carleer, B. D. & van den Boogaard, A. H., 12 Sep 2016, Forming Technology Forum 2016. Volk, W. (ed.). München: UTG, TUM, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3 Citations (Scopus)

Gradient Enhanced Physically Based Plasticity: Implementation and Application to a Problem Pertaining Size Effect: Implementation and application to a problem pertaining size effect

Perdahcioglu, E. S., Soyarslan, C., van den Boogaard, A. H. & Bargmann, S., 27 Apr 2016, ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming. American Institute of Physics, Vol. 1769. p. - 160011

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

plastic properties
gradients
plastics
voids
flow theory
1 Citation (Scopus)
38 Downloads (Pure)

Interpolation of final geometry and result fields in process parameter space

Misiun, G., Wang, C., Geijselaers, H. & van den Boogaard, T., 4 Jul 2016, NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, Troyes, France, July 4-7, 2016. Saanouni, K. (ed.). EDP Sciences, 8 p. 13006. (MATEC Web of Conferences; vol. 80).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
interpolation
geometry
principal components analysis
routes
rings

Investigation of stress partitioning in a two-phase steel by cyclic shear tests

Perdahcioglu, E. S., Geijselaers, H. J. M. & van den Boogaard, A. H., 12 Sep 2016, Advanced Methods in Material Testing for Sheet Metal Forming. p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
34 Downloads (Pure)

On the nonlinear anelastic behaviour of AHSS

Torkabadi, A., Meinders, V. T. & van den Boogaard, A. H., 4 Sep 2016, NUMISHEET 2016: 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Cardoso, R., De Souza Neto, E., César de Sá, J. M. A. & Adetoro, O. B. (eds.). IOP Publishing, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
unloading
physics
recovery
hysteresis
steels
30 Downloads (Pure)

Parameter Study for Friction Surface Cladding of AA1050 on AA2024-T351

Liu, S., Bor, T. C., Geijselaers, H. J. M. & Akkerman, R., 17 May 2016, Proceedings of the 11th International Symposium on Friction Stir Welding. Cambridge, UK, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

File
1 Citation (Scopus)

The effect of tooling deformation on process control in multistage metal forming

Havinga, G. T. & van den Boogaard, A. H., 27 Apr 2016, ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming. Chinesta, F., Cueto, E. & Abisset-Chavanne, E. (eds.). AIP, p. 060010-1-060010-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Force measurement
Stamping
Metal forming
Elastic deformation
Process control

The evolution of forming process models – from process simulation to model-based control

van den Boogaard, A. H. & Havinga, G. T., 4 Jul 2016, Numiform. Saanouni, K. (ed.). Troyes: UTT, p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

97 Downloads (Pure)

The softened heat-affected zone in resistance spot welded tailor hardened boron steel: a material model for crash simulation

Eller, T., Greve, L., Andres, M. T., Medricky, M., Geijselaers, H. J. M., Meinders, V. T. & van den Boogaard, A. H., 22 May 2016, International Conference on Impact Loading of Structures and Materials (ICILSM). Turin, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Heat affected zone
Boron
Steel
Hardness
Welds
2015
1 Citation (Scopus)
49 Downloads (Pure)

A constitutive model for the anelastic behavior of Advanced High Strength Steels

Torkabadi, A., van Liempt, P., Meinders, V. T. & van den Boogaard, A. H., 1 Sep 2015, COMPLAS - XIII International Conference on Computational Plasticity: fundamentals and applications. Barcelona: CIMNE, p. 378-385

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Constitutive models
High strength steel
Unloading
64 Downloads (Pure)

Differential hardening in IF steel - Experimental results and a crystal plasticity based model

Mulder, J., Eyckens, P. & van den Boogaard, A. H., 29 Jun 2015, Advanced constitutive models in sheet metal forming. Hora, P. (ed.). Zurich: Institute of Virtual Manufacturing, ETH Zurich, p. 113-118

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Plasticity
Hardening
Crystals
Steel
Textures
79 Downloads (Pure)

Friction modelling in sheet metal forming simulations: application and validation on an U-Bend product

Sigvant, M., Hol, J., Chezan, T. & van den Boogaard, T., 29 Jun 2015, Advanced constitutive models in sheet metal forming. Hora, P. (ed.). Zurich: Institute of Virtual Manufacturing, p. 135-142

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Metal forming
Sheet metal
Friction
Tribology
Stamping
29 Downloads (Pure)

Friction Surface Cladding of AA1050 on AA2024-T351; influence of clad layer thickness and tool rotation rate

Liu, S., Bor, T. C., Geijselaers, H. J. M. & Akkerman, R., 1 Oct 2015, 4th International conference on Scientific and Technical Advances on Friction stir Welding & Processing, FSWP 2015. San Sebastian, Spain: IK4 Lortek, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Friction
Substrates
Hard facing
Deposits
Defects
2 Citations (Scopus)

Identification of plasticity model parameters of the heat-affected zone in resistance spot welded martensitic boron steel

Eller, T., Greve, L., Andres, M. T., Medricky, M., Meinders, V. T. & van den Boogaard, A. H., 16 Mar 2015, Sheet Metal 2015. Duflou, J., Leacock, A., Micari, F. & Hagenah, H. (eds.). Erlangen-Nürnberg: Trans Tech Publications Ltd, p. 369-376 8 p. (Key engineering materials; vol. 639).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Heat affected zone
Plasticity
Boron
Identification (control systems)
Steel
1 Citation (Scopus)
31 Downloads (Pure)

Inverse identification of process variations for thin steel sheet bending

Havinga, G. T. & van den Boogaard, A. H., 15 Apr 2015, Material Forming ESAFORM 2015. Trans Tech Publications Ltd, p. 1363-1368

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Metal forming
Steel sheet
Parameter estimation
Lubrication
Decomposition
29 Downloads (Pure)

Thermal and Flow Analysis of Friction Surface Cladding with Varying Clad Layer Thickness

Liu, S., Bor, T. C., Geijselaers, H. J. M. & Akkerman, R., 31 May 2015, International Deep Drawing Research Group 2015, IDDRG. Zhang, S-H., Chen, J. & Jing, H-M. (eds.). Shanghai, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
2014
25 Downloads (Pure)

Adaptive process control strategy for a two-step bending process

Dallinger, F. N., Roux, E. P., Havinga, G. T., d'Ippolito, R., van Tijum, R., van Ravenswaaij, R., Hora, P. & van den Boogaard, A. H., 28 Apr 2014, KES Transactions on Sustainable Design and Manufacturing. Setchi, R., Howlett, R. J., Naim, M. & Seinz, H. (eds.). Cardiff: Future Technology Press, England, UK, p. 618-627 (1; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Process control
Feedforward control
Defects
Metal forming
Sheet metal
74 Downloads (Pure)

A software solution for advanced friction modeling applied to sheet metal forming

Hol, J., Wiebenga, J. H., Dane, C., Meinders, V. T. & van den Boogaard, A. H., 2 Jun 2014, IDDRG 2014 - Innovations for the sheet metal industry. Sfar, H. & Maillard, A. (eds.). Paris, p. 344-349

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Metal forming
Sheet metal
Friction
Lubrication
Hydrodynamics
51 Downloads (Pure)

Boundary and Mixed Lubrication Friction Modeling under forming process conditions

Meinders, V. T., Hol, J. & van den Boogaard, A. H., 6 Jan 2014, Numisheet 2014: The 9th international conference and workshop on numerical simulation of 3D sheet metal forming processes. Yoon, J. W. & Stoughton, T. B. (eds.). Melbourne: AIP, p. 912-917

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
108 Downloads (Pure)

Identification of plasticity model parameters of the heat-affected zone in resistance spot welded martensitic boron steel

Eller, T., Greve, L., Andres, M., Medricky, M., Meinders, T. & van den Boogaard, T., 15 Sep 2014, 7th Forming Technology Forum: warm and hot forming. Enschede: University of Twente, p. 55-62

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Heat affected zone
Plasticity
Boron
Identification (control systems)
Steel
6 Citations (Scopus)
116 Downloads (Pure)

Influence of feed rate on damage development in hot ring rolling

Wang, C., van den Boogaard, A. H., Omerspahic, E., Recina, V. & Geijselaers, H. J. M., 19 Oct 2014, 11th International conference on technology of plasticity, ICTP 2014. Ishikawa, T. & Mori, K-I. (eds.). Nagoya, Japan: Elsevier, p. 292-297 (Procedia engineering; vol. 81).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Porosity
Preforming
Steel ingots
Automotive engineering
Aerospace engineering

Influence of ring growth rate on damage development in hot ring rolling

Wang, C., Geijselaers, B., Omerspahic, E., Recina, V. & van den Boogaard, T., 15 Sep 2014, 7th Forming Technology Forum: warm and hot forming. Enschede, p. 159-163

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

19 Downloads (Pure)

Inline control of a strip bending process in mass production

Havinga, G. T., van den Boogaard, A. H., Dallinger, F. N. & Hora, P., 1 Jun 2014, IDDRG 2014 Conference Proceedings, Innovations for the sheet metal industry. Paris, p. 175-180

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Metal forming
Autocorrelation
Byproducts
Materials properties
Actuators
22 Downloads (Pure)

On the distortion of yield surface under complex loading paths in sheet metal forming

Yue, Z. M., Badreddine, H., Saanouni, K., Perdahcioglu, E. S., Soyarslan, C., Tekkaya, A. E. & van den Boogaard, A. H., 1 Jun 2014, IDDRG conference proceedings. Langerak, N. (ed.). Paris, p. 246-251

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
29 Downloads (Pure)

Strain path dependent evolution of yield locus based on HAH model description

Dallinger, F. N., Roux, E. P., Hora, P., Barlat, F. & van den Boogaard, A. H., 1 Jun 2014, IDDRG 2014 Conference Proceedings, Innovations for the sheet metal industry. Sfar, H. & Maillard, A. (eds.). Paris, p. 163-168

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
1 Downloads (Pure)

Stretching the limits of forming processes by robust optimization: A demonstrator

Wiebenga, J. H., Atzema, E. H., Atzema, E. H. & van den Boogaard, A. H., 6 Jan 2014, NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes: Part A Benchmark Problems and Results and Part B General Papers. Yoon, J. W., Stoughton, T. B., Rolfe, B., Beynon, J. H. & Hodgson, P. (eds.). Melbourne: AIP, p. 1061-1067 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stretching
Mechanical testing
Metal forming
Textures
Steel

Tailored Work Hardening Descriptions in Simulation of Sheet Metal Forming

Vegter, H., Mulder, J., van Liempt, P. & Heijne, J., 6 Jan 2014, Numisheet 2014: The 9th international conference and workshop on numerical simulation of 3D sheet metal forming processes. Yoon, J. W. & Stoughton, T. B. (eds.). Melbourne: AIP, p. 474-481

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2013
46 Downloads (Pure)

Accounting for material scatter in sheet metal forming simulations

Wiebenga, J. H., Atzema, E. H., Atzema, E. H., Boterman, R., Abspoel, M. & van den Boogaard, A. H., 2 Jun 2013, Unknown. Hora, P. (ed.). Zurich, p. 57-62

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Metal forming
Sheet metal
Materials properties
Mechanical testing
Textures
42 Downloads (Pure)

Constitutive modeling of quench-hardenable boron steel with tailored properties

Eller, T. K., Greve, L., Anders, M. T., Medricky, M., Hatscher, A., Meinders, T. & van den Boogaard, T., 19 Sep 2013, Forming Technology Forum. Volk, W. (ed.). Herrsching, p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Boron
Hardness
Hardening
Steel
Constitutive models
9 Downloads (Pure)

Experimental and numerical friction characterization for large-scale forming simulations

Hol, J., Meinders, V. T. & van den Boogaard, A. H., 2 Jun 2013, IDDRG 2013 Conference Proceedings. Hora, P. (ed.). Zurich: Swiss Federal Institute of Technology, p. 337-342

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Friction
Deep drawing
Carbon steel
Lubricants
Metals