Research Output 1985 2020

Filter
Conference contribution
2013
9 Downloads (Pure)

Experimental and numerical friction characterization for large-scale forming simulations

Hol, J., Meinders, V. T. & van den Boogaard, A. H., 2 Jun 2013, IDDRG 2013 Conference Proceedings. Hora, P. (ed.). Zurich: Swiss Federal Institute of Technology, p. 337-342

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Friction
Deep drawing
Carbon steel
Lubricants
Metals
1 Citation (Scopus)

Modeling of the Austenite-Martensite Transformation in Stainless and TRIP Steels

Geijselaers, H. J. M., Hilkhuijsen, P., Bor, T. C., Perdahcioglu, E. S. & van den Boogaard, A. H., 6 Jul 2013, The 11th International Conference on Numerical Methods in Industrial Forming Processes. Zhang, S-H., Liu, X-H., Gheng, M. & Li, J. (eds.). American Institute of Physics, p. 175-182 (AIP conference proceedings; vol. 1532).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

steel
modeling
texture
thermodynamics
3 Citations (Scopus)
3 Downloads (Pure)

Multi-Stage FE Simulation of Hot Ring Rolling

Wang, C., Geijselaers, H. J. M. & van den Boogaard, A. H., 6 Jul 2013, The 11th International Conference on Numerical Methods in Industrial Forming Processes: NUMIFORM 2013. Zhang, S-H. & Liu, X-H. (eds.). AIP Publishing LLC, p. 1014-1019 (AIP conference proceedings; vol. 1532).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Upsetting (forming)
Piercing
Automotive engineering
Aerospace engineering
Subroutines
2 Citations (Scopus)
43 Downloads (Pure)

Sequential optimization of strip bending process using multiquadric radial basis function surrogate models

Havinga, G. T., van den Boogaard, A. H. & Klaseboer, G., 22 Apr 2013, The current state-of-the-art on materials forming, numerical and experimental approaches at different length-scales: ESAFORM 2013. Trans Tech Publications Ltd, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File

Towards zero-defect manufacturing of smal metal parts

van Ravenswaaij, R., van Tijum, R., Hora, P., van den Boogaard, A. H. & Engel, U., 2 Jun 2013, IDDRG 2013 Conference Proceedings. Hora, P. (ed.). Zurich: Institute of Virtual Manufacturing, ETH Zurich, p. 87-92

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2012
2 Citations (Scopus)
31 Downloads (Pure)

A numerical approach to robust in-line control of roll forming processes

Wiebenga, J. H., Weiss, M., Rolfe, B. & van den Boogaard, A. H., 16 Sep 2012, Unknown. Krakow, p. 727-730 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Defects
Byproducts
Process design
Materials properties
Scattering
23 Downloads (Pure)

Application of Wrinkling Criterion for Prediction of Side-Wall Wrinkles in Deepdrawing of Conical Cups

Wisselink, H. H., Nagy, G. T. & Meinders, V. T., 25 Nov 2012, IDDRG Conference 2012: Lightweighting: Possibilities & Challenges. Tewari, A., Narasimhan, K. & Date, P. P. (eds.). Mumbai: IDDRG, p. 301-306

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Lubrication
Packaging
Finite element method
Steel
Experiments
1 Citation (Scopus)
1 Downloads (Pure)

Free surface modeling of contacting solid metal flows employing the ALE formulation

van der Stelt, A. A., Bor, T. C., Geijselaers, H. J. M., Akkerman, R. & Huetink, H., 14 Mar 2012, The 15th International ESAFORM Conference on Material Forming 2011 Proceedings. Merklein, M. & Hagenah, H. (eds.). Erlangen: Trans Tech Publications Ltd, p. 431-436

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

formulations
metals
friction stir welding
finite element method
boundary conditions
15 Downloads (Pure)

Material Induced Anisotropic Damage

Niazi, M. S., Wisselink, H. H., Meinders, V. T. & van den Boogaard, A. H., 5 Jun 2012, Advanced Failure Prediction Methods in Sheet Metal Forming, 5th Forming Technology Forum 2012. Hora, P. (ed.). Zurich: Institute of Virtual Manufacturing, ETH Zurich, p. 23-28

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Anisotropy
Ductile fracture
Formability
Martensite
Scanning
52 Downloads (Pure)

Modeling of asphalt and experiments with a discrete particles method

Ormel, T. J., Magnanimo, V., ter Huerne, H. L. & Luding, S., 8 Aug 2012, Proceedings MAIREPAV7 - 7th International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, August 8 - 10, 2012, Utah, USA. Wilson, D., Costello, S., Henning, T., Black, P. & Olsen, C. (eds.). Auckland, p. 1-10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Asphalt
Experiments
Surface roughness
Asphalt pavements
Viscoelasticity
11 Downloads (Pure)

Modelleren van asfalt verdichting met de discrete elementen methode en laboratorium onderzoek

Ormel, T. J., ter Huerne, H. L., Magnanimo, V. & Luding, S., 22 May 2012, CROW Infradagen 2012, 22-23 May 2012, Papendal, the Netherlands (on-line). Ede, the Netherlands: C.R.O.W., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

File
47 Downloads (Pure)

Multi-scale friction modeling for manufacturing processes: The boundary layer regime

Hol, J., Karupannasamy, D. K. & Meinders, V. T., 4 Jun 2012, Proceedings of the ASME 2012 International Manufacturing Science and Engineering Conference. Yamaguchi, H., Mears, L., Miguel Angel Selles Canto, Masahiko Yoshino & Shreyes Melkote (eds.). Notre Dame, Indiana: American Society of Mechanical Engineers (ASME), p. 1-10 (cd) 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Boundary layers
Friction
Metal forming
Chemical elements
Macros
2011

Adaptive Smoothed Finite Elements (ASFEM) for history dependent material models

Quak, W. & van den Boogaard, A. H., 2011, The 14th International Conference on Material Forming ESAFORM 2011 Proceedings. Menary, G. (ed.). Belfast: American Institute of Physics, p. 1197-1202 (AIP Conference Proceedings; vol. 1353).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Computational efficiency
14 Downloads (Pure)

A model for TRIP steel constitutive behaviour

Perdahcioglu, E. S. & Geijselaers, H. J. M., 2011, The 14th International Conference on Material Forming ESAFORM 2011 Proceedings. Menari, G. (ed.). Belfast: American Institute of Physics, p. 1500-1504 5 p. (AIP Conference proceedings; vol. 1353).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Austenite
Steel
Homogenization method
Formability
Constitutive models

A Multi-scale Friction Model for Sheet Metal Forming Simulations

Hol, J., Cid Alfaro, M. V., Meinders, V. T. & Huetink, H., 21 Aug 2011, AIP Conference Proceedings Volume 1383. Chang, K., Nam Han, H., Huh, H., Barlat, F. & Lee, M. (eds.). Seoul: AIP, p. 784-791 (AIP Conference Proceedings; vol. 1383).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Metal forming
Sheet metal
Friction
Textures
Stretching
27 Downloads (Pure)

A multi-scale friction model framework for full scale sheet forming simulations

Hol, J., Meinders, V. T. & Huetink, H., 27 Apr 2011, The 14th International Conference on Material Forming ESAFORM 2011 Proceedings. Menary, G. (ed.). Belfast: American Institute of Physics, p. 207-212 (AIP Conference Proceedings; vol. 1353).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Friction
Macros
Metal forming
Sheet metal
Adhesion
1 Citation (Scopus)

Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding

van der Stelt, A. A., Bor, T. C., Geijselaers, H. J. M., Quak, W., Akkerman, R. & Huetink, H., 27 Apr 2011, The 14th International ESAFORM Conference on Material Forming 2011 Proceedings. Menary, G. (ed.). Belfast: AIP Conference Proceedings, p. 1290-1295 (AIP Conference Proceedings; vol. 1353).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Friction stir welding
Numerical methods
Finite element method
Computer simulation
Analytical models
19 Downloads (Pure)

Constitutive modeling of multiphase materials including phase transformations

Perdahcioglu, E. S. & Geijselaers, H. J. M., 3 Jan 2011, Macro to Nano-scale Inelastic Deformation and Failure of Materials & Multiscale Modeling. Khan, A. S., Meredith, C. & Farrokh, B. (eds.). NEAT Press, p. 1-3

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Austenite
Plasticity
Phase transitions
Steel
Martensitic transformations
1 Citation (Scopus)
26 Downloads (Pure)

Efficient Robust Optimization of Metal Forming Processes using a Sequential Metamodel Based Strategy

Wiebenga, J. H., Klaseboer, G. & van den Boogaard, A. H., 21 Aug 2011, Numisheet 2011. Chung, J. (ed.). Seoul: Korean Society for Technology of Plasticity, p. 978-985

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Metal forming
Cost reduction
Process design
Industry
61 Downloads (Pure)

Formability limit curves under stretch-bending

Martinez Lopez, A. & van den Boogaard, A. H., 5 Jun 2011, Proceedings of the 15th International Deep Drawing Research Group Conference: IDDRG 2011. Bilbao, Spain: International Deep Drawing Research Group, p. 1-8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Formability
Bending (forming)
Commercial vehicles
Sheet metal
High strength steel
15 Downloads (Pure)

On a novel approach for optimizing composite materials panel using surrogate models

De Guido, S., Akcay-Perdahcioglu, D., Geijselaers, H. J. M. & de Boer, A., 21 Sep 2011, Proceedings of the 3rd ECCOMAS. Rolfes, R. & Jansen, E. L. (eds.). Hannover: Leibniz Universität, p. 439-446

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Buckling
Composite materials
Constitutive equations
Thermoplastics
Boundary conditions
1 Citation (Scopus)
20 Downloads (Pure)

Prediction of the mechanical behaviour of TRIP steel

Perdahcioglu, E. S. & Geijselaers, H. J. M., 25 Sep 2011, International Conference on the Technology of Plasticity, ICTP 2011. Tekkaya, A. E. & Hirt, G. (eds.). Aachen, p. 1-4 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Austenite
Steel
Martensite
Hardness
Homogenization method
53 Downloads (Pure)

Robust optimization of metal forming processes using a metamodel-based strategy

Wiebenga, J. H., Klaseboer, G. & van den Boogaard, A. H., 27 Apr 2011, The 14th International Conference on Material Forming ESAFORM 2011 Proceedings. Menary, G. (ed.). Belfast: American Institute of Physics, p. 11-16 (AIP Conference Proceedings; vol. 1353).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Metal forming
Cost reduction
Industry
1 Citation (Scopus)

The stabilizing effect of bending-under-tension

Emmens, W. C. & van den Boogaard, A. H., 27 Apr 2011, The 14th International Conference on Material Forming ESAFORM 2011 Proceedings. Menary, G. (ed.). Belfast: AIP Conference Proceedings, p. 1583-1588 (AIP Conference Proceedings; vol. 1353).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Elongation
Bending moments
Strain hardening
Compaction
Fibers
18 Downloads (Pure)

validation of advanced material models using the crossdie test

Wisselink, H. H., Niazi, M. S. & Huetink, H., 5 Jun 2011, Towards sustainable sheet forming processes. Gutierrez, M. (ed.). bilbao: International Deep Drawing Research Group, IDDRG, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Formability
High strength steel
Tensors
Hardening
Aluminum
2010
1 Citation (Scopus)
54 Downloads (Pure)

A constitutive model for multi-phase steels

Perdahcioglu, E. S. & Geijselaers, H. J. M., 24 Oct 2010, Proceedings of the AMPT conference. Chastel, Y. (ed.). Paris, France: AIP, p. 3-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Constitutive models
Steel
Computational efficiency
Plastics
6 Downloads (Pure)

An adaptive method for history dependent materials

Quak, W. & van den Boogaard, A. H., 19 Jul 2010, Proceedings of the 9th World Congress on Computational Mechanics and 4th Asian PAcific Congress on Computational Mechanics. Khalili, N., Valliappan, S., Li, Q. & Russel, A. (eds.). Sydney, Australia: Centre for Infrastructure Engineering and Safety, p. 187-188

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Triangulation
Forging
Extrusion
Plasticity
Hardening
12 Downloads (Pure)

Beïnvloeden bandeigenschappen de schade-ontwikkeling van de weg

Noordermeer, J. W. M., de Boer, A., ter Huerne, H. L., Schipper, D. J. & Meinders, V. T., 23 Jun 2010, CROW infradagen. Papendal, Netherlands: C.R.O.W., p. 1-11 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

File
49 Downloads (Pure)

Constitutive modeling of metastable austenitic stainless steel

Perdahcioglu, E. S., Geijselaers, H. J. M. & Huetink, H., 3 Jan 2010, International Symposium on Plasticity and its Current Applications. Proceedings. 03-8 january 2010 St. Kitts.. Khan, A. (ed.). St Kitts: NEAT Press, p. 130-132

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Austenitic stainless steel
Martensitic transformations
Constitutive models
10 Downloads (Pure)

Coupled Analysis of Material Flow and Die Deflection in Direct Aluminum Extrusion

Assaad, W. & Geijselaers, H. J. M., 24 Oct 2010, International Conference on Advances in Materials and Processing Technologies (AMPT2010). Chinesta, F., Chastel, Y. & El Mansori, M. (eds.). American Institute of Physics, p. 495-500 (AIP conference proceedings; vol. 1315, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Extrusion
Aluminum
Extrusion dies
Stiffness matrix
Experiments
16 Downloads (Pure)

EFFECT OF BENDING ON FORMABILITY LIMITS

Martinez Lopez, A. & van den Boogaard, A. H., 22 Sep 2010, XVI International Annual SOMIM Conference. Cervantes de Gortari, J., Ramírez, V. B. & Martínez, S. M. (eds.). Monterrey, Mexico: Sociedad Mexicana de Ingenieros Mecánicos, p. 1-8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Formability
Sheet metal
Gas emissions
High strength steel
Greenhouse gases
3 Citations (Scopus)

Effect of Thickness Stress in Stretch-Bending

van den Boogaard, A. H., Emmens, W. C. & Huetink, H., 13 Jun 2010, Numiform 2010, Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes. Barlat, F., Moon, Y. H. & Lee, M. G. (eds.). Pohang: AIP, p. 504-511 (AIP Conference Proceedings; vol. 1252).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

12 Downloads (Pure)

Efficient implicit simulation for incremental forming

Hadoush, A. & van den Boogaard, A. H., 16 May 2010, IV European Congress on Computational Mechanics (ECCM IV): Solids, Structures and Coupled Problems in Engineering. Wriggers, P. & Allix, O. (eds.). Paris: European Community on Computational Methods in Applied Sciences, p. 1-2 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
16 Downloads (Pure)

Fractional behaviour at cyclic stretch-bending

Emmens, W. C., van den Boogaard, A. H., Kazantzis, A. V. & de Hosson, J. T. M., 31 May 2010, Tools and technologies for the processing of ultra high strength steels. Kolleck, R. (ed.). Graz: Graz University of Technology, p. 613-622

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
8 Downloads (Pure)

Implementation of Asymmetric Yielding in Case Specific Finite Element Models improves the Prediction of Femoral Fracture Risk

Derikx, L. C., Vis, R., Meinders, V. T., Verdonschot, N. J. J. & Tanck, E., 5 Mar 2010, 18th Annual Symposium on Computational Methods in Orthopaedic Biomechanics. New Orleans, USA: Tulane University, p. 18-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File

Implementation of asymmetric yielding in case specific finite element models improves the prediction of femoral fracture risk.

Derikx, L. C., Vis, R., Meinders, V. T., Verdonschot, N. J. J. & Tanck, E., 5 Jul 2010, Transactions 17th Congress of the European Society of Biomechanics. Edinburgh, Scotland: University of Edinburgh, p. 699-699

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Influence of plastic strain on mechanically induced martensitic transformations

Perdahcioglu, E. S., Geijselaers, H. J. M. & Huétink, J., 25 Jan 2010, International Conference on Martensitic Transformations (ICOMAT). Olson, G. B., Lieberman, D. S. & Saxena, A. (eds.). Wiley, p. 614-620 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Martensitic transformations
Plastic deformation
Martensite
Magnetic sensors
Stainless Steel
13 Downloads (Pure)

Mechanical and forming properties of AA6xxx sheet from room to warm temperatures

Miroux, A., Ghosh, M., Kurukuri, S., Kestens, L. & van den Boogaard, A. H., 5 Sep 2010, Proceedings of the 12th international conference on aluminium alloys. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Tokyo, Japan: The Japan Institute of Light Metals, p. 1243-1248

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
work hardening
rooms
mechanical properties
deep drawing
punches
11 Downloads (Pure)

Modelling of failure in sheet forming using cohesive elements

Wisselink, H. H. & Huetink, H., 19 Jul 2010, Proceedings of the 9th World Congress on Computational Mechanics and 4th Asian PAcific Congress on Computational Mechanics. Khalili, N., Valliappan, S., Li, Q. & Russell, A. (eds.). Sydney, Australia: Centre for Infrastructure Engineering and Safety, p. 189-190 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Shear bands
Metal forming
Energy absorption
Sheet metal
Ships

Mould filling analysis of aluminium extrusion dies

Koopman, A. J., Geijselaers, H. J. M. & Huetink, H., 13 Jun 2010, Numiform 2010 Proceedings of the 10th international conference AIP 1252. Barlat, F., Moon, Y. H. & Lee, M. G. (eds.). Pohang, Korea: American Institute of Physics, p. 290-295 (AIP Conference Proceedings; vol. 1252).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

23 Downloads (Pure)

Multiscale friction modeling for sheet metal forming

Hol, J., Cid Alfaro, M. V., de Rooij, M. B. & Meinders, V. T., 13 Jun 2010, Tribology of Manufacturing Processes. Felder, E. & Montmitonnet, P. (eds.). Paris: Transvalor - Presses des MINES, p. 573-582 (Sheet Metal Forming; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Metal forming
Sheet metal
Friction
Textures
Stretching
17 Downloads (Pure)

Non-proportional deformation paths for sheet metal - experiments

van den Boogaard, A. H. & van Riel, M., 3 Jan 2010, Finite plasticity and visco-plasticity of conventional and emerging materials. Khan, A. S. & Farrokh, B. (eds.). St. Kitts: NEAT Press, p. 223-225

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
12 Downloads (Pure)

Numerical Determination of Sheet Metal Formability under Simultaneous Stretching and Bending

Martinez Lopez, A. & van den Boogaard, A. H., 24 Oct 2010, International Conference on Advances in Materials and Processing Technologies (AMPT2010). Chinesta, F., Chastel, Y. & El Mansori, M. (eds.). American Institute of Physics, p. 413-418 (AIP Conference Proceedings; vol. 1315, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Bending (forming)
Formability
Sheet metal
Stretching
ABAQUS
12 Downloads (Pure)

On the coupling of reanalysis techniques with a surrogate-based design optimization method

Akcay-Perdahcioglu, D., Ellenbroek, M. H. M., Geijselaers, H. J. M. & de Boer, A., 19 Sep 2010, Proceedings ICAS 2010. Nice: ICAS, p. 1-11 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Design optimization
36 Downloads (Pure)

Prediction of Gas Leak Tightness of Superplastically Formed Products

Snippe, C. . H. C. & Meinders, T., 13 Jun 2010, NUMIFORM 2010: Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming. Barlat, F., Moon, Y. H. & Lee, M. G. (eds.). New York, NY: AIP, p. 818-825 (AIP Conference Proceedings; vol. 1252).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Volume fraction
Plastic deformation
Particle detectors
Aluminum sheet
Hydrostatic pressure
50 Downloads (Pure)

The influence of curvature on FLC's of mild steel, (A)HSS and aluminium

Atzema, E. H., Atzema, E. H., Fictorie, E., van den Boogaard, A. H. & Droog, J. M. M., 31 May 2010, Tools and technologies for the processing of ultra high strength steels: IDDRG conference proceedings, 50th anniversary conference, 2010 May 31 - June 02, Graz, Austria. Kolleck, R. (ed.). Graz: Verlag der Technischen Universität Graz, p. 519-528

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Formability
Carbon steel
Aluminum
2 Citations (Scopus)

Thermo-mechanical Forming of Al‐Mg‐Si Alloys: Modeling and Experiments

Kurukuri, S., van den Boogaard, A. H., Ghosh, M. & Miroux, A., 13 Jun 2010, Numiform 2010: Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes. Barlat, F., Moon, Y. H. & Lee, M. G. (eds.). American Institute of Physics, p. 810-817 (AIP Conference Proceedings; vol. 1252).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Strain rate
Anisotropy
Experiments
Plastics
Temperature
2009
10 Downloads (Pure)

A flexible rotor on flexible supports: modeling & experiments

Dikmen, E., van der Hoogt, P., de Boer, A., Aarts, R. G. K. M. & Jonker, J. B., 13 Nov 2009, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition [cd-rom]. Lake Buena Vista, Florida, USA: American Society of Mechanical Engineers (ASME), p. 1-6 6 p. (IMECE2009-10851).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
16 Downloads (Pure)

An advanced material model for aluminum sheet forming at elevated temperatures

Kurukuri, S., Miroux, A., Ghosh, M. & van den Boogaard, A. H., 2 Sep 2009, Computational Plasticity X - Fundamentals and Applications. Oñate, E., Owen, D. R. J. & Suárez, B. (eds.). Barcelona, Spain: CIMNE, p. 1-4 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
19 Downloads (Pure)

Designing PV powered LED products - Integration of PV technology in innovative products

Reinders, A. H. M. E., de Boer, A., de Winter, A. & Haverlag, M., 21 Sep 2009, Proceedings of 24th EU Photovoltaic Solar Energy Conference and Exhibition. Ossenbrink Sinke, W. & Helm, P. (eds.). Munchen, Germany: WIP - Renewable Energies, p. 3179-3183 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Light emitting diodes
Product design
Watches
Remote control
Innovation