Research Output per year
Research Output 1985 2020
- 1 - 50 out of 224 results
- Publication Year, Title (descending)
2019
A material point method based ploughing model to study the effect of asperity geometry on the ploughing behaviour of an elliptical asperity
Mishra, T., de Rooij, M., Shisode, M., Hazrati, J. & Schipper, D. J., 16 Oct 2019, In : Tribology international. 142, 106017.Research output: Contribution to journal › Article › Academic › peer-review
plowing
Geometry
Analytical models
geometry
Steel sheet
2
Citations
(Scopus)
An analytical model to study the effect of asperity geometry on forces in ploughing by an elliptical asperity
Mishra, T., de Rooij, M., Shisode, M., Hazrati, J. & Schipper, D. J., 1 Sep 2019, In : Tribology international. 137, p. 405-419 15 p.Research output: Contribution to journal › Article › Academic › peer-review
plowing
Analytical models
Geometry
Substrates
geometry
A noninvasive MRI based approach to estimate the mechanical properties of human knee ligaments
Naghibi, H., Mazzoli, V., Gijsbertse, K., Hannink, G., Sprengers, A., Janssen, D., van den Boogaard, T. & Verdonschot, N., May 2019, In : Journal of the mechanical behavior of biomedical materials. 93, p. 43-51 9 p.Research output: Contribution to journal › Article › Academic › peer-review
Ligaments
Magnetic resonance imaging
Mechanical properties
Stiffness
Bone
Characterization of interfacial shear strength and its effect on ploughing behaviour in single-asperity sliding
Mishra, T., de Rooij, M., Shisode, M., Hazrati, J. & Schipper, D. J., 15 Oct 2019, In : Wear. 436-437, 203042.Research output: Contribution to journal › Article › Academic › peer-review
plowing
shear strength
Shear strength
sliding
Friction
Characterization of yield criteria for zinc coated steel sheets using nano-indentation with knoop indenter
Mishra, T., de Rooij, M., Shisode, M., Hazrati, J. & Schipper, D. J., 5 Nov 2019, In : Surface and coatings technology. 125110.Research output: Contribution to journal › Article › Academic › peer-review
Nanoindentation
Steel sheet
nanoindentation
Indentation
loci
Control of ring rolling with variable thickness and curvature
Arthington, M., Havinga, J. & Duncan, S., 6 Feb 2019, In : International journal of material forming.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Forging
Hardware
Metals
Video cameras
Feedback control
Exploiting data in smart factories: Real-time state estimation and model improvement in metal forming mass production
Havinga, J., Mandal, P. K. & van den Boogaard, A. H., 24 Jul 2019, In : International journal of material forming. p. 1-11 11 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Metal forming
State estimation
Industrial plants
Interpolation
Physics
Finite element modeling of pipe-laying dynamics using corotational elements
de Vries, F. H., Geijselaers, van den Boogaard, A. H. & Huisman, A., 1 Aug 2019, In : International Journal of Computational Methods in Engineering Science and Mechanics. 20, 4, p. 293-307 15 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Finite Element Modeling
Buoyancy
Pipe
Contacts (fluid mechanics)
Moment
3
Citations
(Scopus)
52
Downloads
(Pure)
Microscopic investigation of damage mechanisms and anisotropic evolution of damage in DP600
Aşık, E. E., Perdahcıoğlu, E. S. & van den Boogaard, A. H., 2 Jan 2019, In : Materials Science and Engineering A. 739, p. 348-356 9 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Martensite
damage
voids
Steel
martensite
4
Citations
(Scopus)
2
Downloads
(Pure)
Modelling of ploughing in a single-asperity sliding contact using material point method
Mishra, T., Ganzenmüller, G. C., de Rooij, M., Shisode, M., Hazrati, J. & Schipper, D. J., 15 Jan 2019, In : Wear. 418-419, p. 180-190 11 p.Research output: Contribution to journal › Article › Academic › peer-review
plowing
sliding contact
Substrates
Friction
sliding
2018
1
Citation
(Scopus)
72
Downloads
(Pure)
A class of rate-independent lower-order gradient plasticity theories: Implementation and application to disc torsion problem
Perdahcioğlu, E. S., Soyarslan, C., Asik, E. E., van den Boogaard, T. & Bargmann, S., 14 Aug 2018, In : Materials. 11, 8, 1425.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Torsional stress
Plasticity
Hardening
Crystals
Plastic flow
A continuum model for the effect of dynamic recrystallization on the stress-strain response
Kooiker, H., Perdahcioğlu, E. S. & van den Boogaard, A. H., 22 May 2018, In : Materials. 11, 5, 867.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Dynamic recrystallization
Strain rate
Hot working
Austenitic stainless steel
High strength steel
A crystal plasticity model for describing the anisotropic hardening behavior of steel sheets during strain-path changes
Kim, H., Barlat, F., Lee, Y., Zaman, S. B., Lee, C. S. & Jeong, Y., Dec 2018, In : International journal of plasticity. 111, p. 85-106 22 p.Research output: Contribution to journal › Article › Academic › peer-review
Steel sheet
Plasticity
Hardening
Crystals
Stress-strain curves
1
Citation
(Scopus)
6
Downloads
(Pure)
A level-set-based strategy for thickness optimization of blended composite structures
Farzan Nasab, F., Geijselaers, H. J. M., Baran, I., Akkerman, R. & de Boer, A., 15 Dec 2018, In : Composite structures. 206, p. 903-920 18 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Composite structures
Skin
Composite materials
Global optimization
Torsional stress
Evaluation and assessment of non-normal output during robust optimization
Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2018, In : Structural and multidisciplinary optimization. 1Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Robust Optimization
Output
Metal forming
Evaluation
Normal distribution
4
Citations
(Scopus)
50
Downloads
(Pure)
Feedforward control of sheet bending based on force measurements
Havinga, J., van den Boogaard, T., Dallinger, F. & Hora, P., 1 Jan 2018, In : Journal of Manufacturing Processes. 31, p. 260-272 13 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Feedforward control
Force measurement
Feedback control
Deep drawing
Metal forming
3
Citations
(Scopus)
34
Downloads
(Pure)
On the nonlinear anelastic behavior of AHSS
Torkabadi, A., Perdahcioğlu, E. S., Meinders, V. T. & van den Boogaard, A. H., 15 Oct 2018, In : International journal of solids and structures. 151, p. 2-8 7 p.Research output: Contribution to journal › Article › Academic › peer-review
Unloading
unloading
Plastic deformation
nonlinearity
Nonlinearity
Robust optimization based on analytical evaluation of uncertainty propagation
Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 20 Nov 2018, In : Engineering Optimization. 23 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Uncertainty Propagation
Robust Optimization
Scatter
Metamodel
Black Box
5
Citations
(Scopus)
2
Downloads
(Pure)
The effects of temperature on friction and wear mechanisms during direct press hardening of Al-Si coated ultra-high strength steel
Venema, J., Hazrati, J., Matthews, D. T. A., Stegeman, R. A. & van den Boogaard, A. H., 15 Jul 2018, In : Wear. 406-407, p. 149-155 7 p.Research output: Contribution to journal › Article › Academic › peer-review
high strength steels
High strength steel
hardening
Hardening
friction
2017
1
Citation
(Scopus)
50
Downloads
(Pure)
A nonlinear dynamic corotational finite element model for submerged pipes
De Vries, F. H., Geijselaers, H. J. M., Van Den Boogaard, A. H. & Huisman, A., 12 Dec 2017, In : IOP Conference Series: Materials Science and Engineering. 276, 012030.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Pipe
Buoyancy
Gravitation
Ships
Water
1
Citation
(Scopus)
1
Downloads
(Pure)
Experimental and numerical studies of AL7020 formability under orthogonal loading paths with considering yield surface distortion
Yue, Z. M., Badreddine, H., Saanouni, K. & Perdahcioglu, E. S., 1 Apr 2017, In : International journal of mechanical sciences. 123, p. 151-161 11 p.Research output: Contribution to journal › Article › Academic › peer-review
surface distortion
Formability
Constitutive equations
constitutive equations
stress tensors
Friction and Wear Mechanisms During Hot Stamping of AlSi Coated Press Hardening Steel
Loiseaux-Venema, J., Matthews, D. T. A., Hazrati Marangalou, J., Wormann, J. & van den Boogaard, A. H., 2017, In : Wear. p. 137-381Research output: Contribution to journal › Article › Academic › peer-review
stamping
Stamping
Steel
hardening
Hardening
Investigations on anisotropic fracture mechanics of graphitic foams
Toptop, K., van Eijk, B., Geijselaers, H. J. M. & Hessey, N. P., 23 Jun 2017, In : Results in Physics. 7, p. 2043-2053 11 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
fracture mechanics
foams
crack initiation
cameras
shear
1
Citation
(Scopus)
71
Downloads
(Pure)
Modelling of anelastic deformation in dual-phase steel for improved springback simulation
Torkabadi, A., Perdahcioǧlu, E. S. & Van Den Boogaard, A. H., 2017, In : Procedia engineering. 207, p. 185-190 6 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Unloading
Steel
Plastics
Fibers
Dislocations (crystals)
Sequential improvement for robust optimization using an uncertainty measure for radial basis functions
Havinga, G. T., van den Boogaard, A. H. & Klaseboer, G., Apr 2017, In : Structural and multidisciplinary optimization. 55, 4, p. 1345-1363 19 p.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Uncertainty Measure
Robust Optimization
Radial Functions
Basis Functions
Metamodeling
The effect of scoliosis implant design parameters on whole spine mechanical behavior
Arts, J. J., Marangalou, J. H., Meijer, G., Ito, K., van Rietbergen, B. & Homminga, J. J., 24 Apr 2017, In : Journal of bone and joint surgery. British volume. Orthopaedic proceedings. 99-B, SUPP_8, p. 43-43 1 p.Research output: Contribution to journal › Article › Academic
Wire
Stiffness
Ligaments
Biomechanics
Cartilage
8
Citations
(Scopus)
The influence of ligament modelling strategies on the predictive capability of finite element models of the human knee joint
Naghibi Beidokhti, H., Janssen, D., van de Groes, S., Hazrati, J., Van den Boogaard, T. & Verdonschot, N., Dec 2017, In : Journal of biomechanics. 65, p. 1-11Research output: Contribution to journal › Article › Academic › peer-review
Ligaments
Knee Joint
Biomechanical Phenomena
Collateral Ligaments
Kinematics
2016
A comparison between dynamic implicit and explicit finite element simulations of the native knee joint
Naghibi Beidokhti, H., Janssen, D., Khoshgoftar, M., Sprengers, A., Perdahcioglu, E. S., van den Boogaard, A. H. & Verdonschot, N. J. J., 8 Aug 2016, In : Medical engineering & physics. 38, 10, p. 1123-1130Research output: Contribution to journal › Article › Academic › peer-review
Determination of strain hardening parameters of tailor hardened boron steel up to high strains using inverse FEM optimization and strain field matching
Eller, T., Greve, L., Andres, M. T., Medricky, M., Meinders, V. T. & van den Boogaard, A. H., 25 Sep 2016, In : Journal of materials processing technology. 228, p. 43-58 16 p.Research output: Contribution to journal › Article › Academic › peer-review
Boron
Steel
Strain hardening
Finite element method
Hardness
Large-scale microstructural simulation of load-adaptive bone remodeling in whole human vertebrae
Badilatti, S. D., Christen, P., Levchuk, A., Hazrati Marangalou, J., van Rietbergen, B., Parkinson, I. & Müller, R., 2016, In : Biomechanics and modeling in mechanobiology. 15, 1, p. 83-95Research output: Contribution to journal › Article › Academic › peer-review
Bone Remodeling
Bone
Spine
Bone and Bones
Simulation
Parameter reduction for the Yld2004-18p yield criterion
van den Boogaard, A. H., Havinga, G. T., Belin, A. & Barlat, F., 2016, In : International journal of material forming. 9, 2, p. 175-178Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Anisotropy
Patient-specific biomechanical modeling of bone strength using statistically-derived fabric tensors
Lekadir, K., Noble, C., Hazrati Marangalou, J., Hoogendoorn, C., van Rietbergen, B., Taylor, Z. A. & Frangi, A. F., 2016, In : Annals of biomedical engineering. 44, 1, p. 234-246Research output: Contribution to journal › Article › Academic › peer-review
Tensors
Bone
Health
Biomechanics
Materials properties
Plasticity and fracture modeling of the heat-affected zone in resistance spot welded tailor hardened boron steel
Eller, T., Greve, L., Andres, M. T., Medricky, M., Geijselaers, H. J. M., Meinders, V. T. & van den Boogaard, A. H., 28 Mar 2016, In : Journal of materials processing technology. 234, p. 309-322 14 p.Research output: Contribution to journal › Article › Academic › peer-review
Boron
Steel
Heat affected zone
Plasticity
Hardness
Technical Note: Cortical thickness and density estimation from clinical CT using a prior thickness-density relationship
Humbert, L., Hazrati Marangalou, J., del Río Barquero, L. M., van Lenthe, G. H. & van Rietbergen, B., 2016, In : Medical physics. 43, 4, p. 1945- 1945.Research output: Contribution to journal › Article › Academic › peer-review
The effectiveness of percutaneous vertebroplasty is determined by the patient-specific bone condition and the treatment strategy
Widmer Soyka, R. P., Helgason, B., Hazrati Marangalou, J., van den Bergh, J. P., van Rietbergen, B. & Ferguson, S. J., 2016, In : PLoS ONE. 11, 4, p. e0151680- e0151680.Research output: Contribution to journal › Article › Academic › peer-review
Open Access
File
Vertebroplasty
Bone
bones
cement
Bone and Bones
Work hardening descriptions in simulation of sheet metal forming tailored to material type and processing
Vegter, H., Mulder, J., van Liempt, P. & Heijne, J., 2016, In : International journal of plasticity. 80, p. 204-221Research output: Contribution to journal › Article › Academic › peer-review
2015
Accurate determination of flow curves using the bulge test with optical measuring systems
Mulder, J., Vegter, H., Aretz, H., Keller, S. & van den Boogaard, A. H., 20 Jul 2015, In : Journal of materials processing technology. 226, p. 169-187Research output: Contribution to journal › Article › Academic › peer-review
Steel
Aluminum
Strain hardening
Hardening
Poles
An engineering approach to strain rate and temperature compensation of the flow stress established by the hydraulic bulge test
Mulder, J., Vegter, H. & van den Boogaard, A. H., 2015, In : Key engineering materials. 651-653, p. 138-143Research output: Contribution to journal › Article › Academic › peer-review
19
Citations
(Scopus)
A novel approach to estimate trabecular bone anisotropy from stress tensors
Hazrati Marangalou, J., Ito, K. & van Rietbergen, B., 2015, In : Biomechanics and modeling in mechanobiology. p. -Research output: Contribution to journal › Article › Academic › peer-review
3
Citations
(Scopus)
A predictive model of vertebral trabecular anisotropy from ex vivo micro-CT
Lekadir, K., Hoogendoorn, C., Hazrati Marangalou, J., Taylor, Z., Noble, C., van Rietbergen, B. & Frangi, A., 2015, In : IEEE transactions on medical imaging. p. -Research output: Contribution to journal › Article › Academic › peer-review
37
Downloads
(Pure)
Cyclic shear behavior of austenitic stainless steel sheet
Geijselaers, H. J. M., Bor, T. C., Hilkhuijsen, P. & van den Boogaard, A. H., 2015, In : Computer methods in materials science. 15, 1, p. 9-18 10 p.Research output: Contribution to journal › Article › Academic
File
Steel sheet
Austenitic stainless steel
Martensite
Electromagnetic induction
Plastic flow
Friction surface cladding: An exploratory study of a new solid state cladding process
Liu, S., Bor, T. C., van der Stelt, A. A., Geijselaers, H. J. M., Kwakernaak, C., Kooijman, A. M., Mol, J. M. C., Akkerman, R. & van den Boogaard, A. H., 2015, In : Journal of materials processing technology. 229, p. 769-784Research output: Contribution to journal › Article › Academic › peer-review
Friction
Substrates
Corrosion
Temperature
Aluminum
Influence of ring growth rate on damage development in hot ring rolling
Wang, C., Geijselaers, H. J. M., Omerspahic, E., Recina, V. & van den Boogaard, A. H., 20 Aug 2015, In : Journal of materials processing technology. 227, p. 268-280Research output: Contribution to journal › Article › Academic › peer-review
Porosity
Ultrasonic testing
Steel
Rolling mills
Motion control
Large strain cyclic behavior of metastable austenic stainless steel
Geijselaers, H. J. M., Hilkhuijsen, P., Bor, T. C. & van den Boogaard, A. H., 2015, In : Materials science & engineering A. 631, p. 166-172Research output: Contribution to journal › Article › Academic › peer-review
Stainless Steel
stainless steels
Stainless steel
martensite
Bauschinger effect
Model-based control of strip bending in mass production
van den Boogaard, A. H., Havinga, G. T. & van Tijum, R., 2015, In : CIRP annals : manufacturing technology. 64, 1, p. 297-300Research output: Contribution to journal › Article › Academic › peer-review
Metal forming
Friction
Multi-scale friction modeling for sheet metal forming: the boundary lubrication regime
Hol, J. D., Meinders, V. T., de Rooij, M. B. & van den Boogaard, A. H., 2015, In : Tribology international. 81, p. 112-128Research output: Contribution to journal › Article › Academic › peer-review
boundary lubrication
metal forming
metal sheets
Metal forming
Sheet metal
Multi-scale friction modeling for sheet metal forming: the mixed lubrication regime
Hol, J., Meinders, V. T., Geijselaers, H. J. M. & van den Boogaard, A. H., 26 Dec 2015, In : Tribology international. 85, p. 10-25 16 p.Research output: Contribution to journal › Article › Academic › peer-review
metal forming
metal sheets
Metal forming
Sheet metal
lubrication
Physically based criterion for prediction of instability under stretchbending of sheet metal
Perdahcioglu, E. S., Hou, B. & van den Boogaard, A. H., 2015, In : Key engineering materials. 651-653, p. 144-149Research output: Contribution to journal › Article › Academic › peer-review
File
Sheet metal
Membranes
Steel
Stability criteria
Formability
Single scan vector prediction in selective laser melting
Wits, W. W., Bruins, R., Terpstra, L., Huls, R. A. & Geijselaers, H. J. M., 2015, In : AddItive manufacturing. 9, p. 1-6Research output: Contribution to journal › Article › Academic › peer-review
Melting
Lasers
Scanning
Powder metals
Energy absorption
Statistical estimation of femur micro-architecture using optimal shape and density predictors
Lekadir, K., Hazrati Marangalou, J., Hoogendoorn, C., Taylor, Z. A., van Rietbergen, B. & Frangi, A. F., 2015, In : Journal of biomechanics. 48, 4, p. 598-603Research output: Contribution to journal › Article › Academic › peer-review
Bone Density
Femur
Bone
X-Rays
Anatomic Models