Research Output 1992 2019

1ste Kwartaalverslag UT-NLR project

Villa Rodriguez, B. H. & Loendersloot, R., 2004, Enschede: Produktietechniek / Production Technology (PT). 5 p. (DE1200-9)

Research output: Book/ReportReportProfessional

2de kwartaalverslag UT-NLR project

Villa Rodriguez, B. H. & Loendersloot, R., 2004, Enschede: Produktietechniek / Production Technology (PT). 7 p. (DE-1200-10)

Research output: Book/ReportReportProfessional

33 Citations (Scopus)
1 Downloads (Pure)

2D modelling of clad geometry and resulting thermal cycles during laser cladding

Ya, W., Pathiraj, B. & Liu, S., 2016, In : Journal of materials processing technology. 230, p. 217-232 16 p.

Research output: Contribution to journalArticleAcademicpeer-review

Laser cladding
Powders
Geometry
Dilution
Hot Temperature

3de kwartaalverslag UT-NLR project

Villa Rodriguez, B. H. & Loendersloot, R., 2004, Enschede: Produktietechniek / Production Technology (PT). 7 p. (DE1200-11)

Research output: Book/ReportReportProfessional

4de Kwartaalverslag UT-NLR project

Villa Rodriguez, B. H. & Loendersloot, R., 2004, Enschede: Produktietechniek / Production Technology (PT). 6 p. (DE1200-12)

Research output: Book/ReportReportProfessional

71 Downloads (Pure)

A comparative study of heating elements used for the development of textile heaters

Petcu, I., Agrawal, P., Curteza, A., Visser, R., Brinks, G. & Teodorescu, M., 13 Jun 2012, Book of proceedings 12th World Textile Conference AUTEX 2012. Mijović, B. (ed.). Zadar, Croatia: Faculty of Textile Technology of the University of Zagreb, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Electric heating elements
Textiles
Heating
Black coatings
Carbon black
29 Downloads (Pure)

A comparative study of two conductive inkjet inks for fabrication of RF circuit structures

Sridhar, A., van Dijk, D. J. & Akkerman, R., 2009. 5 p.

Research output: Contribution to conferencePaperAcademic

File

A Comparative study of two conductive ink jet inks for fabrication of RF Circuit structures

Sridhar, A. & Akkerman, R., 23 Jun 2009, Large-area, Organic & Printed Electronics Convention, LOPE-C 2009,June 23-25, 2009, Frankfurt, Germany. Frankfurt, Germany, p. 1-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

1 Citation (Scopus)
5 Downloads (Pure)

A consolidation process model for filmstacking glass/PPS laminates

Grouve, W. J. B. & Akkerman, R., 1 Dec 2009.

Research output: Contribution to conferencePaperAcademicpeer-review

Open Access
File
Consolidation
Laminates
Glass
Processing
Heating rate
208 Downloads (Pure)

A consolidation process model for film-stacking glass/PPS laminates

Grouve, W. J. B. & Akkerman, R., 2009, 17th International Conference on Composite Materials (ICCM 17). Edinburgh, Scotland, p. - 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
2 Citations (Scopus)
4 Downloads (Pure)

A continuum mechanics analysis of shear characterisation methods

Akkerman, R., 1 Jun 2018, In : Composites Part A: Applied Science and Manufacturing. 109, p. 131-140 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Continuum mechanics
Fibers
Identification (control systems)
Experiments

A Cooperatieve Benchmark Effort on Testing of Woven Composites

Cao, J., Cheng, H. S., Yu, T. X., Zhu, B., Tao, X. M., Lomov, S. V., Stoilova, T., Verpoest, I., Boisse, P., Launay, J., Hivet, G., Liu, L., Chen, J., de Graaf, E. F. & Akkerman, R., 28 Apr 2004, 7th ESAFORM Conference on Material Forming. Storen, A. (ed.). Trondheim, Noorwegen: Norwegian University of Science and Technology, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

18 Citations (Scopus)
5 Downloads (Pure)
Open Access
File
pyrolysis
recycling
commercialization
mechanical property
glass
19 Downloads (Pure)

Actuator review for smart rotor blades

Paternoster, A., de Boer, A. & Akkerman, R., 2009, Enschede: Technische Mechanica / Applied Mechanics. 5 p.

Research output: Book/ReportReportOther research output

File
4 Citations (Scopus)
40 Downloads (Pure)

Actuators for smart applications

Paternoster, A., de Boer, A., Loendersloot, R. & Akkerman, R., 28 Sep 2010, Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (CD Rom). D. Brei & M. Frecker (eds.). New York, USA: American Society of Mechanical Engineers (ASME), p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Actuators

Actuator voor helikopterflaps

Paternoster, A., Loendersloot, R. & de Boer, A., 15 Mar 2013, In : Technisch weekblad. 2013, p. - 1 p.

Research output: Contribution to journalArticlePopular

15 Downloads (Pure)

Adhesion Characterisation of Inkjet Printed Silver Tracks

Sridhar, A., van Dijk, D. J. & Akkerman, R., 2007, p. 209-210.

Research output: Contribution to conferencePaperAcademic

File
15 Downloads (Pure)

Adhesion characterization of inkjet printed tracks

Sridhar, A., Akkerman, R. & van Dijk, D. J., 2007, p. -.

Research output: Contribution to conferencePosterOther research output

File
1 Downloads (Pure)

Adhesion characterization of inkjet printing

Sridhar, A., van Dijk, D. J. & Akkerman, R., 2007, p. P63-P63. 1 p.

Research output: Contribution to conferencePosterOther research output

Open Access
File
41 Downloads (Pure)
Open Access
File

A least squares approximation of annular flow

Loendersloot, R. & Akkerman, R., 15 Jul 2002, The 6th International Conference on Flow Processes in Composite Materials. Bhattacharyya, Sayaraman & Lin (eds.). Auckland, New Zealand, p. 53-62

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)

A level-set-based strategy for thickness optimization of blended composite structures

Farzan Nasab, F., Geijselaers, H. J. M., Baran, I., Akkerman, R. & de Boer, A., 15 Dec 2018, In : Composite structures. 206, p. 903-920 18 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Composite structures
Skin
Composite materials
Global optimization
Torsional stress
28 Citations (Scopus)

A lubrication approach to friction in thermoplastic composites forming processes

ten Thije, R. H. W., Akkerman, R., Ubbink, M. P. & van der Meer, L., 2011, In : Composites Part A: Applied Science and Manufacturing. 42, 8, p. 950-960

Research output: Contribution to journalArticleAcademicpeer-review

Thermoplastics
Lubrication
Friction
Reynolds equation
Geometry
29 Downloads (Pure)

A Methodology Based on Pulse-Velocity Measurements to Quantify the Chemical Degradation Levels in Thin Mortar Specimens

Hernandez Delgadillo, H., Kern, B., Loendersloot, R., Yntema, D. & Akkerman, R., 1 Dec 2018, In : Journal of Nondestructive Evaluation. 37, 4, 79.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Mortar
Velocity measurement
Degradation
Acoustics
Acoustic waves
34 Citations (Scopus)

A microscopy Study of the Transition From Yielding to Crazing in Polypropylene

Dijkstra, P. T. S., van Dijk, D. J. & Huetink, H., 2002, In : Polymer engineering and science. 42, 1, p. 152-160

Research output: Contribution to journalArticleAcademicpeer-review

17 Citations (Scopus)
2 Downloads (Pure)

Amplified responsiveness of multi-layered, polymer grafts: Synergy between brushes and hydrogels

Ramakrishna, S. N., Cirelli, M., Kooij, E. S., Gunnewiek, M. K. & Benetti, E. M., 24 Sep 2015, In : Macromolecules. 48, 19, p. 7106-7116

Research output: Contribution to journalArticleAcademicpeer-review

Hydrogels
Graft copolymers
Brushes
Hydrogel
Homopolymerization
60 Citations (Scopus)

A multi-layer triangular membrane finite element for the forming simulation of laminated composites

ten Thije, R. H. W. & Akkerman, R., 2009, In : Composites Part A: Applied Science and Manufacturing. 40, 1-6, p. 739-753

Research output: Contribution to journalArticleAcademicpeer-review

145 Downloads (Pure)

Analysis of pultrusion process for thick glass/polyester composites: transverse shear stress formations

Baran, I., 17 Jan 2017, In : Advanced manufacturing: polymer & composites. 2, 3-4, p. 124-132

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Pultrusion
Polyesters
Shear stress
Preheating
Glass

Analysis of residual transverse stresses in a thick UD glass/polyester pultruded profile using hole drilling with strain gage and digital image correlation

Yuksel, O., Baran, I., Ersoy, N. & Akkerman, R., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. American Institute of Physics, Vol. 1960. 020040

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

strain gages
polyesters
drilling
residual stress
glass
1 Citation (Scopus)
1 Downloads (Pure)

Analysis of the local fiber volume fraction variation in pultrusion process

Baran, I., Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. AIP Publishing LLC, 030029. (AIP Conference Proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Pultrusion
Residual stresses
Volume fraction
Image segmentation
Fibers
36 Citations (Scopus)
170 Downloads (Pure)

Analysis of the mechanical properties of a reinforced thermoplastic pipe (RTP)

Kruijer, M. P., Warnet, L. & Akkerman, R., 2005, In : Composites Part A: Applied Science and Manufacturing. 36, 2, p. 291-300

Research output: Contribution to journalArticleAcademicpeer-review

File
8 Citations (Scopus)
695 Downloads (Pure)

Analysis of yarn bending behaviour

Cornelissen, B. & Akkerman, R., 2009, 17th International Conference on Composite Materials (ICCM 17). Edinburgh, Scotland: The British Composites Society, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
11 Citations (Scopus)

Analytical Modeling of Impact Resistance and Damage Tolerance of Laminated Composite Plates

Huang, K. Y., de Boer, A. & Akkerman, R., 2008, In : AIAA journal. 46, 11, p. 2760-2772

Research output: Contribution to journalArticleAcademicpeer-review

1 Citation (Scopus)

An attempt to use scratch tests to predict the residual lifetime of unplasticised poly(vinyl chloride) pipes,

Visser, R., Warnet, L. & Akkerman, R., 2009, In : Engineering fracture mechanics. 76, 18, p. 2698-2710

Research output: Contribution to journalArticleAcademicpeer-review

16 Downloads (Pure)

A new engineering approach to predict the hydrostatic strength of uPVC pipes (CD-rom)

Visser, R., Engels, T. A. P., Govaert, L. E. & Bor, T. C., 2007, Proceedings of PPS E/A 2007. Rigdahl, M. (ed.). Gotenburg, Sweden: Chalmers University of Technology, p. - 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

File
9 Downloads (Pure)

A new engineering approach to predict the long-term hydrostatic strength of unplasticized poly(vinyl chloride) pipes

Visser, R., Wolters, M., Bor, T. C., Engels, T. A. P. & Govaert, L. E., 22 Apr 2008, Proceedings of the 10th International PVC Conference. Patrick, S. (ed.). Brighton, UK: IOM Communications, Brighton, UK, p. 377-387 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
3 Downloads (Pure)

A new engineering approach to predict the long-term hydrostatic strength of uPVC pipes

Visser, H. A., Engels, T. A. P., Govaert, L. E. & Bor, T. C., 2007, p. P75-P75. 1 p.

Research output: Contribution to conferencePosterOther research output

Open Access
File

An experimental investigation on the thermal field of overlapping layers in laser-assisted tape winding process

Hosseini, S. M. A., Baran, I. & Akkerman, R., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. American Institute of Physics, 020011

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

tapes
laminates
lasers
temperature
products

An idealised BC for the meso scale analysis of textile impregnation

Grouve, W. J. B., 2008, p. -.

Research output: Contribution to conferencePosterOther research output

10 Downloads (Pure)

An idealised BC for the meso scale analysis of textile impregnation (CD-rom).

Grouve, W. J. B. & Akkerman, R., 8 Jul 2008, 9th International Conference on Flow Processes in Composite Materials. Trochu, F. (ed.). Montreal, Canada: Réseau Matériaux Québec, p. - 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
162 Downloads (Pure)

An inktjet printing-based process chain for conductive structures on printed circuit board materials

Sridhar, A., 12 May 2010, Enschede: University of Twente. 149 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

File
Printed circuit boards
Printing
Electroless plating
Lithography
Plasmas

An integral model for high precision composite forming

Akkerman, R., Lamers, E. A. D. & Wijskamp, S., 2006, In : Revue Européenne de mécanique numérique. 15, 4, p. 359-377

Research output: Contribution to journalArticleAcademicpeer-review

11 Citations (Scopus)

An integral process model for high precision composite forming

Akkerman, R., Lamers, E. A. D. & Wijskamp, S., 1 Feb 2006, Cetex, From Scratch to Flight. Proceeding of the First CETEX Conference, 1-2 February 2006, Bandenburg, Germany. Bersee, H. E. N. & Niño, G. F. (eds.). Delft: Delft University of Technology, p. 133-148

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

5 Citations (Scopus)
158 Downloads (Pure)

Annealing of SnO2 thin films by ultra-short laser pulses

Scorticati, D., Illiberi, A., Bor, T., Eijt, S. W. H., Schut, H., Römer, G. R. B. E., de Lange, D. F. & Huis in 't Veld, A. J., 2014, In : Optics express. 22, S3, p. A607-A621

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
annealing
thin films
pulses
lasers
optical properties
20 Citations (Scopus)
43 Downloads (Pure)

A novel numerical mechanical model for the stress-strain distribution in superconducting cable-in-conduit conductors

Qin, J., Wu, Y., Wu, R., Warnet, L. & Nijhuis, A., 2011, In : Superconductor science and technology. 24, 6, p. 1-11 065012.

Research output: Contribution to journalArticleAcademicpeer-review

File
212 Downloads (Pure)

Antibacterial textiles

Amrit, U., 23 Apr 2015, Enschede: University of Twente. 181 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

File
Textiles
Molecules
Laundries
Cyclodextrins
Laundering
41 Downloads (Pure)

A parametric study on compression molding of reference parts with integrated features using carbon composite production waste

Abdul Rasheed, M. I., Rietman, B., Visser, R. & Akkerman, R., 15 Apr 2015, Material Forming ESAFORM 2015: 18th International ESAFORM conference. Ofenheimer, A., Poletti, C., Schalk-Kitting, D. & Sommitsch, C. (eds.). Trans Tech Publications Ltd, p. 458-463 (Key Engineering Materials; vol. 651-653).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Compression molding
Consolidation
Carbon
Fibers
Jamming
12 Downloads (Pure)

A permeability prediction for (Un)Sheared non-crimp fabrics

Loendersloot, R., Akkerman, R. & Lomov, S. V., 2004, Proceedings of FPCM-7. Advani, S. G. (ed.). Newark, USA: University of Delaware, p. 367-372 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
9 Downloads (Pure)

A permeability prediction for non-crimp fabrics

Loendersloot, R. & Akkerman, R., 11 Jul 2006, Proceedings of the 8th International conference on Flow Processes in Compostie Materials, FPCM-8, 11-13 November 2006, Douai, France. Binetruy, C. (ed.). Douai, France: Ecole des Mines de Douai, p. 73-81 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
7 Downloads (Pure)

A permeability prediction for non-crimp fabrics

Loendersloot, R. & Akkerman, R., 26 Apr 2006, Proceedings of the International ESAFORM conference on Material Forming, 26-28 April 2006, Glasgow, UK. Juster, N. & Rosochowski, A. (eds.). Glasgow, UK: Publishing House AKAPIT, p. 799-802 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File