Research Output 1992 2019

Abstract

Characterisation of Recycled (Glas/TPU woven fabric) Flake Reinforced Thermoplastic Composite

Abdul Rasheed, M. I., Rietman, B. (ed.), Rietman, B., Visser, R. & Akkerman, R., 14 Jan 2013, p. 25-26.

Research output: Contribution to conferenceAbstractOther research output

41 Downloads (Pure)

Characterisation of recycled (glass/TPU woven fabric) flake reinforced thermoplastic composite

Abdul Rasheed, M. I., Rietman, B., Visser, R. & Akkerman, R., 14 Jan 2012, p. 25-26.

Research output: Contribution to conferenceAbstractOther research output

File
11 Downloads (Pure)

Intra-Ply Shear Locking in Finite Element Simulations

Rietman, B. (ed.), Wolthuizen, D. J., ten Thije, R. H. W. & Akkerman, R., 14 Jan 2013, p. 18-19.

Research output: Contribution to conferenceAbstractOther research output

File
Article
33 Citations (Scopus)
1 Downloads (Pure)

2D modelling of clad geometry and resulting thermal cycles during laser cladding

Ya, W., Pathiraj, B. & Liu, S., 2016, In : Journal of materials processing technology. 230, p. 217-232 16 p.

Research output: Contribution to journalArticleAcademicpeer-review

Laser cladding
Powders
Geometry
Dilution
Hot Temperature
2 Citations (Scopus)
4 Downloads (Pure)

A continuum mechanics analysis of shear characterisation methods

Akkerman, R., 1 Jun 2018, In : Composites Part A: Applied Science and Manufacturing. 109, p. 131-140 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Continuum mechanics
Fibers
Identification (control systems)
Experiments
18 Citations (Scopus)
4 Downloads (Pure)
Open Access
File
pyrolysis
recycling
commercialization
mechanical property
glass

Actuator voor helikopterflaps

Paternoster, A., Loendersloot, R. & de Boer, A., 15 Mar 2013, In : Technisch weekblad. 2013, p. - 1 p.

Research output: Contribution to journalArticlePopular

41 Downloads (Pure)
Open Access
File
1 Citation (Scopus)

A level-set-based strategy for thickness optimization of blended composite structures

Farzan Nasab, F., Geijselaers, H. J. M., Baran, I., Akkerman, R. & de Boer, A., 15 Dec 2018, In : Composite structures. 206, p. 903-920 18 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Composite structures
Skin
Composite materials
Global optimization
Torsional stress
28 Citations (Scopus)

A lubrication approach to friction in thermoplastic composites forming processes

ten Thije, R. H. W., Akkerman, R., Ubbink, M. P. & van der Meer, L., 2011, In : Composites Part A: Applied Science and Manufacturing. 42, 8, p. 950-960

Research output: Contribution to journalArticleAcademicpeer-review

Thermoplastics
Lubrication
Friction
Reynolds equation
Geometry
27 Downloads (Pure)

A Methodology Based on Pulse-Velocity Measurements to Quantify the Chemical Degradation Levels in Thin Mortar Specimens

Hernandez Delgadillo, H., Kern, B., Loendersloot, R., Yntema, D. & Akkerman, R., 1 Dec 2018, In : Journal of Nondestructive Evaluation. 37, 4, 79.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Mortar
Velocity measurement
Degradation
Acoustics
Acoustic waves
34 Citations (Scopus)

A microscopy Study of the Transition From Yielding to Crazing in Polypropylene

Dijkstra, P. T. S., van Dijk, D. J. & Huetink, H., 2002, In : Polymer engineering and science. 42, 1, p. 152-160

Research output: Contribution to journalArticleAcademicpeer-review

17 Citations (Scopus)
2 Downloads (Pure)

Amplified responsiveness of multi-layered, polymer grafts: Synergy between brushes and hydrogels

Ramakrishna, S. N., Cirelli, M., Kooij, E. S., Gunnewiek, M. K. & Benetti, E. M., 24 Sep 2015, In : Macromolecules. 48, 19, p. 7106-7116

Research output: Contribution to journalArticleAcademicpeer-review

Hydrogels
Graft copolymers
Brushes
Hydrogel
Homopolymerization
60 Citations (Scopus)

A multi-layer triangular membrane finite element for the forming simulation of laminated composites

ten Thije, R. H. W. & Akkerman, R., 2009, In : Composites Part A: Applied Science and Manufacturing. 40, 1-6, p. 739-753

Research output: Contribution to journalArticleAcademicpeer-review

144 Downloads (Pure)

Analysis of pultrusion process for thick glass/polyester composites: transverse shear stress formations

Baran, I., 17 Jan 2017, In : Advanced manufacturing: polymer & composites. 2, 3-4, p. 124-132

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Pultrusion
Polyesters
Shear stress
Preheating
Glass
36 Citations (Scopus)
168 Downloads (Pure)

Analysis of the mechanical properties of a reinforced thermoplastic pipe (RTP)

Kruijer, M. P., Warnet, L. & Akkerman, R., 2005, In : Composites Part A: Applied Science and Manufacturing. 36, 2, p. 291-300

Research output: Contribution to journalArticleAcademicpeer-review

File
11 Citations (Scopus)

Analytical Modeling of Impact Resistance and Damage Tolerance of Laminated Composite Plates

Huang, K. Y., de Boer, A. & Akkerman, R., 2008, In : AIAA journal. 46, 11, p. 2760-2772

Research output: Contribution to journalArticleAcademicpeer-review

1 Citation (Scopus)

An attempt to use scratch tests to predict the residual lifetime of unplasticised poly(vinyl chloride) pipes,

Visser, R., Warnet, L. & Akkerman, R., 2009, In : Engineering fracture mechanics. 76, 18, p. 2698-2710

Research output: Contribution to journalArticleAcademicpeer-review

An integral model for high precision composite forming

Akkerman, R., Lamers, E. A. D. & Wijskamp, S., 2006, In : Revue Européenne de mécanique numérique. 15, 4, p. 359-377

Research output: Contribution to journalArticleAcademicpeer-review

5 Citations (Scopus)
157 Downloads (Pure)

Annealing of SnO2 thin films by ultra-short laser pulses

Scorticati, D., Illiberi, A., Bor, T., Eijt, S. W. H., Schut, H., Römer, G. R. B. E., de Lange, D. F. & Huis in 't Veld, A. J., 2014, In : Optics express. 22, S3, p. A607-A621

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
annealing
thin films
pulses
lasers
optical properties
20 Citations (Scopus)
43 Downloads (Pure)

A novel numerical mechanical model for the stress-strain distribution in superconducting cable-in-conduit conductors

Qin, J., Wu, Y., Wu, R., Warnet, L. & Nijhuis, A., 2011, In : Superconductor science and technology. 24, 6, p. 1-11 065012.

Research output: Contribution to journalArticleAcademicpeer-review

File
5 Citations (Scopus)

Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise

Agnelli, S., Baldi, F., Blackman, B. R. K., Castellani, L., Frontini, P. M., Laiarinandrasana, L., Pegoretti, A., Rink, M., Salazar, A. & Visser, R., 2015, In : Polymer testing. 44, p. 72-81

Research output: Contribution to journalArticleAcademicpeer-review

38 Citations (Scopus)
147 Downloads (Pure)

A Review on the Mechanical Modeling of Composite Manufacturing Processes

Baran, I., Cinar, K., Ersoy, N., Akkerman, R. & Hattel, J. H., 2016, In : Archives of computational methods in engineering. p. 1-31

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Residual Stress
Manufacturing
Composite
Residual stresses
Composite materials
2 Citations (Scopus)
20 Downloads (Pure)

Assessment of failure and cohesive zone length in co-consolidated hybrid C/PEKK butt joint

Baran, I., Warnet, L. L. & Akkerman, R., 1 Aug 2018, In : Engineering Structures. 168, p. 420-430 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Fillers
Skin
Delamination
Crack initiation
Crack propagation
22 Citations (Scopus)

A study of the noncollinear ultrasonic-wave-mixing technique under imperfect resonance conditions

Demcenko, A., Mainini, L. & Korneev, V. A., 2015, In : Ultrasonics. 57, p. 179-189

Research output: Contribution to journalArticleAcademicpeer-review

ultrasonic radiation
polymethyl methacrylate
deviation
polyvinyl chloride
longitudinal waves
7 Citations (Scopus)

A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic composites – Part II

Ropers, S., Sachs, U., Kardos, M. & Osswald, T. A., 1 May 2017, In : Composites Part A: Applied Science and Manufacturing. 96, p. 67-76 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Thermoplastics
Composite materials
Experiments
Rheometers
Dynamic mechanical analysis
12 Citations (Scopus)
98 Downloads (Pure)

A yarn interaction model for circular braiding

van Ravenhorst, J. H. & Akkerman, R., 2016, In : Composites Part A: Applied Science and Manufacturing. 81, p. 254-263 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

File
Yarn
Friction
Carbon
Automation
Mathematical models
35 Downloads (Pure)

Brush Swelling and Attachment Strength of Barnacle Adhesion Protein on Zwitterionic Polymer Films as a Function of Macromolecular Structure

Guo, S., Quintana, R., Cirelli, M., Toa, Z. S. D., Arjunan Vasantha, V., Kooij, E. S., Jańczewski, D. & Vancso, G. J., 18 Jun 2019, In : Langmuir. 35, 24, p. 8085-8094 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
brushes
Brushes
Polymer films
swelling
attachment
6 Citations (Scopus)

Buckling of composite beams with two enveloped delaminations: Lower and upper bounds

Parlapalli, M. S. R. P., Shu, D. & Chai, G. B., 2008, In : Computers & Structures. 86, 23-24, p. 2155-2165

Research output: Contribution to journalArticleAcademic

54 Citations (Scopus)

Carbon composite based on Multiaxial Multiply Stiched Preforms. Part V: Geometry of Sheared Biaxial Fabrics

Loendersloot, R., Lomov, S. V., Akkerman, R. & Verpoest, I., 2006, In : Composites Part A: Applied Science and Manufacturing. 37, 1, p. 103-113

Research output: Contribution to journalArticleAcademicpeer-review

93 Citations (Scopus)

Carbon Composites based on multiaxial multiply stitched performs, Part 3: Biaxial Tension, picture frame and compression tests of the preforms

Lomov, S. V., Barburski, M., Stoilova, T., Verpoest, I., Akkerman, R., Loendersloot, R. & ten Thije, R. H. W., 2005, In : Composites Part A: Applied Science and Manufacturing. 36, 9, p. 1188-1206

Research output: Contribution to journalArticleAcademicpeer-review

36 Downloads (Pure)

Carbon Nanofibers Grown on Large Woven Cloths: Morphology and Properties of Growth

Koysin, V., Bor, T. C., Kotanjac, Z., Lefferts, L., Warnet, L. & Akkerman, R., 2016, In : C : Journal of carbon research. 2, 3, p. 19- 19.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Carbon nanofibers
Polymer matrix composites
Nanofibers
Functional groups
Adhesion
6 Citations (Scopus)

Characterisation of metal–thermoplastic composite hybrid joints by means of a mandrel peel test

Su, Y., de Rooij, M. B., Grouve, W. J. B. & Warnet, L., 2016, In : Composites. Part B : Engineering. 95, p. 293-300

Research output: Contribution to journalArticleAcademicpeer-review

Fasteners
Composite materials
Thermoplastics
Fibers
5 Citations (Scopus)
85 Downloads (Pure)

Characterising the fracture toughness of polymers at moderately high rates of loading with the use of instrumented tensile impact testing

Visser, R., Caimmi, F. & Pavan, A., 2013, In : Engineering fracture mechanics. 101, p. 67-79

Research output: Contribution to journalArticleAcademicpeer-review

File
Impact testing
Tensile testing
Fracture toughness
Polymers
Fracture mechanics
22 Citations (Scopus)

Characterization of cellulose based sponges for wound dressings

Gustaite, S., Kazlauske, J., Bobokalonov, J., Perni, S., Dutschk, V., Liesiene, J. & Prokopovich, P., 26 Aug 2015, In : Colloids and surfaces A: Physicochemical and engineering aspects. 480, p. 336-342 7 p.

Research output: Contribution to journalArticleAcademicpeer-review

cellulose
Cellulose
Polyphenols
porosity
Steam
383 Citations (Scopus)

Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results

Cao, J., Akkerman, R., Boisse, P., Chen, J., Cheng, H. S., de Graaf, E. F., Gorczyca, J. L., Harrison, P., Hivet, G., Launay, J., Lee, W., Liu, L., Lomov, S. V., Long, A., de Luycker, E., Morestin, F., Padvoikis, J., Peng, X. Q., Sherwood, J., Stoilova, T. & 6 othersTao, X. M., Verpoest, I., Willems, A., Wiggers, J., Yu, T. X. & Zhu, B., 2008, In : Composites Part A: Applied Science and Manufacturing. 39, 6, p. 1037-1053

Research output: Contribution to journalArticleAcademicpeer-review

23 Citations (Scopus)

Characterization of the dynamic friction of woven fabrics: Experimental methods and benchmark results

Sachs, U., Akkerman, R., Fetfatsidis, K., Vidal-Sallé, E., Schumacher, J., Ziegmann, G., Allaoui, S., Hivet, G., Maron, B., Vanclooster, K. & Lomov, S. V., 2014, In : Composites Part A: Applied Science and Manufacturing. 67, p. 289-298

Research output: Contribution to journalArticleAcademicpeer-review

Friction
Polypropylenes
Melting point
Yarn
Hydrodynamics

Characterization of thermoplastic composites for hot stamp forming

Rietman, B., Grouve, W. & Akkerman, R., 2014, JEC Composites Magazine, 51, 87, p. 59-61 3 p.

Research output: Contribution to specialist publicationArticleProfessional

Thermoplastics
Composite materials
Processing
Temperature
23 Citations (Scopus)

Circular braiding take-up speed generation using inverse kinematics

van Ravenhorst, J. H. & Akkerman, R., 2014, In : Composites Part A: Applied Science and Manufacturing. 64, p. 147-158

Research output: Contribution to journalArticleAcademicpeer-review

Inverse kinematics
Computer aided engineering
Yarn
Friction
Composite materials
2 Citations (Scopus)
52 Downloads (Pure)

Cladding of Advanced Al Alloys Employing Friction Stir Welding

van der Stelt, A. A., Bor, T. C., Geijselaers, H. J. M., Akkerman, R. & van den Boogaard, A. H., 2013, In : Key engineering materials. 554-557, p. 1014-1021

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Friction stir welding
Fillers
Substrates
Microhardness
Optical microscopy

CO2 dry cleaning: Acoustic cavitation and other mechanisms to induce mechanical action

Sutanto, S., Dutschk, V., Mankiewicz, J., van Roosmaalen, M. & Warmoeskerken, M., 2014, In : Journal of supercritical fluids. 89, p. 1-7

Research output: Contribution to journalArticleAcademicpeer-review

5 Citations (Scopus)

Comparison of Artificial Dissipation and Limited Flux Schemes in Arbitrary Lagrangian Eulerian Finite Element Formulations

Helm, P. N., van der Helm, P. N., Huetink, H. & Akkerman, R., 1998, In : International journal for numerical methods in engineering. 41, 6, p. 1057-1076

Research output: Contribution to journalArticleAcademicpeer-review

19 Citations (Scopus)

Comparison of residual stress predictions and measurements using excimer laser layer removal

Jansen, K. M. B., Orij, J. J. W., van Dijk, D. J., Meijer, C. Z. & Meijer, C. Z., 1999, In : Polymer engineering and science. 39, 10, p. 2030-2041

Research output: Contribution to journalArticleAcademicpeer-review

Compressibility of carbon woven fabrics with carbon nanotubes/nanofibres grown on the fibres

Lomov, S. V., Gorbatikh, L., Kotanjac, Z., Koysin, V., Houlle, M., Rochez, O., Karahan, M. & Verpoest, I., 2010, In : Composites science and technology. p. -

Research output: Contribution to journalArticleAcademicpeer-review

Compressibility of CNT-Grafted Fibrous Reinforcements: A Theory

Lomov, S. V., Koysin, V., Karahan, M., Godara, A., Gorbatikh, L. & Verpoest, I., 2010, In : International journal of material forming. 3, 1, p. 627-630

Research output: Contribution to journalArticleAcademicpeer-review

7 Citations (Scopus)

Compressibility of CNT-Grafted Fibrous Reinforcements: A Theory

Lomov, S. V., Koysin, V., Karahan, M., Godara, A., Gorbatikh, L. & Verpoest, I., 2010, In : International journal of material forming. 3, Suppl., p. 627-630

Research output: Contribution to journalArticleAcademic

2 Citations (Scopus)

Computational analysis of the interaction between impregnation, forming and curing in pultrusion

Carlone, P., Baran, I., Akkerman, R. & Palazzo, G. S., 2015, In : Key engineering materials. 651-653, 651-653, p. 889-894

Research output: Contribution to journalArticleAcademicpeer-review

Pultrusion
Impregnation
Curing
Analytical models
Numerical models
24 Citations (Scopus)
73 Downloads (Pure)

Computational Approaches for Modeling the Multiphysics in Pultrusion Process

Carlone, P., Baran, I., Hattel, J. H. & Palazzo, G. S., 2013, In : Advances in mechanical engineering. 2013, 301875, p. 301875 14 p.

Research output: Contribution to journalArticleAcademic

File
10 Citations (Scopus)
41 Downloads (Pure)

Consolidation process model for film stacking glass/PPS laminates

Grouve, W. J. B. & Akkerman, R., 2010, In : Plastics rubber and composites. 39, 3-5, p. 208-215

Research output: Contribution to journalArticleAcademicpeer-review

File
18 Citations (Scopus)

Constrained Efficient Global Optimization for Pultrusion Process

Tutum, C. C., Deb, K. & Baran, I., 2015, In : Materials and manufacturing processes. 30, 4, p. 538-551

Research output: Contribution to journalArticleAcademicpeer-review

Pultrusion
Global optimization
Constrained optimization
Composite materials
Costs