Research Output 1992 2019

2012
37 Downloads (Pure)

Towards Design for Thermoplastic Composites Manufacturing Using Process Simulation

Akkerman, R., Rietman, B., Haanappel, S. & Sachs, U., 29 Oct 2012, Proceedings of ITHEC 2012. Borgmann, H. (ed.). Bremen, Germany, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

File

Tow mechanics: a contact mechanics approach of friction in fibrous tows during forming

Cornelissen, B., Rietman, B., de Rooij, M. B. & Akkerman, R., 2012, In : Key engineering materials. 504-506, p. 325-330

Research output: Contribution to journalArticleAcademicpeer-review

Mechanics
Friction
Metals
Composite materials
1 Citation (Scopus)

Tow Mechanics: a contact mechanics approach of friction in fibrous tows during forming

Cornelissen, B., Rietman, B., de Rooij, M. B. & Akkerman, R., 14 Mar 2012, The 15th International ESAFORM Conference on Material Forming 2011 Proceedings. Merklein, M. & Hagenah, H. (eds.). Erlangen, Germany, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)
15 Downloads (Pure)

Vibration Based Damage Identification in a Composite T-Beam Utilising Low Cost Integrated Actuators and Sensors

Ooijevaar, T. H., Warnet, L., Loendersloot, R., Akkerman, R. & de Boer, A., 3 Jul 2012, Proceedings of the Sixth European Workshop on Structural Health Monitoring 2012. Boller, C. (ed.). Germany: DGZfP e.V., p. 232-239

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Actuators
Structural health monitoring
Sensors
Composite materials
Diaphragms
579 Downloads (Pure)

Weld strength of laser-assisted tape-placed thermoplastic composites

Grouve, W. J. B., 31 Aug 2012, Enschede: University of Twente. 152 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

File
Tapes
Thermoplastics
Welds
Lasers
Composite materials
2011
28 Citations (Scopus)

A lubrication approach to friction in thermoplastic composites forming processes

ten Thije, R. H. W., Akkerman, R., Ubbink, M. P. & van der Meer, L., 2011, In : Composites Part A: Applied Science and Manufacturing. 42, 8, p. 950-960

Research output: Contribution to journalArticleAcademicpeer-review

Thermoplastics
Lubrication
Friction
Reynolds equation
Geometry
20 Citations (Scopus)
43 Downloads (Pure)

A novel numerical mechanical model for the stress-strain distribution in superconducting cable-in-conduit conductors

Qin, J., Wu, Y., Wu, R., Warnet, L. & Nijhuis, A., 2011, In : Superconductor science and technology. 24, 6, p. 1-11 065012.

Research output: Contribution to journalArticleAcademicpeer-review

File
47 Downloads (Pure)

A spool pattern tool for circular braiding

van Ravenhorst, J. H. & Akkerman, R., 2011. 5 p.

Research output: Contribution to conferencePaperAcademic

File
5 Citations (Scopus)

A spool pattern tool for circular braiding

van Ravenhorst, J. H. & Akkerman, R., 21 Aug 2011, ICCM-18 Conference Proceedings. Lee, W. I. (ed.). ICCM, p. - (W32-1-AF0779).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

38 Downloads (Pure)

Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding

van der Stelt, A. A., Bor, T. C., Geijselaers, H. J. M., Quak, W., Akkerman, R. & Huetink, H., 2011.

Research output: Contribution to conferencePaperAcademic

File
2 Citations (Scopus)

Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding

van der Stelt, A. A., Bor, T. C., Geijselaers, H. J. M., Quak, W., Akkerman, R. & Huetink, H., 27 Apr 2011, The 14th International ESAFORM Conference on Material Forming 2011 Proceedings. Menary, G. (ed.). Belfast: AIP Conference Proceedings, p. 1290-1295 (AIP Conference Proceedings; vol. 1353).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Friction stir welding
Numerical methods
Finite element method
Computer simulation
Analytical models
19 Downloads (Pure)

Complex stamp forming of advanced thermoplastic composites

Akkerman, R., Haanappel, S., Sachs, U. & Rietman, B., 21 Sep 2011, 3rd ECCOMAS Thermatic Cconference on Mechnical Response of Composites 2011. Rolfes, R. & Jansen, E. L. (eds.). Hannover, Germany: Leibniz Universitat, p. 27-34

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Thermoplastics
Composite materials
Thermosets
Processing
Aviation
33 Downloads (Pure)

Continuous-discrete variable optimization on composites using kriging surrogate model

Ferreira, A. J. M. (ed.), De Guido, S., Geijselaers, H. J. M. & de Boer, A., 28 Jun 2011, p. 702-1-702-2.

Research output: Contribution to conferencePaperAcademic

File
Thermoplastics
Buckling
Composite materials
8 Citations (Scopus)

CORD, a novel numerical mechanical model for Nb3Sn CICCs

Qin, J., Warnet, L., Wu, Y. & Nijhuis, A., 2011, In : IEEE transactions on applied superconductivity. 21, 3, p. 2046-2049 4 p., 5672808.

Research output: Contribution to journalArticleAcademicpeer-review

strands
cables
Cables
conductors
Copper
6 Downloads (Pure)

Development of a Damage Quantification Model for Composite Skin-Stiffener Structures

Loendersloot, R., Ooijevaar, T. H., de Boer, A. & Akkerman, R., 6 Jul 2011, 5th ECCOMAS Thematic Conference on Smart Structures and Materials SMART'11. Boller, C. & Janocha, H. (eds.). Saarbrucken: University of Saarland, p. 197-212

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Strain energy
Skin
Structural health monitoring
Composite materials
Composite structures
11 Downloads (Pure)

Dynamic characterisation of a damaged composite structure with stiffeners employing fibre bragg gratings

Ooijevaar, T. H., Botsis, J. (ed.), Gmür, T. (ed.), Grooteman, F. P., Cugnoni, J. (ed.), Warnet, L., Loendersloot, R., Akkerman, R. & de Boer, A., 2011, p. 155-156.

Research output: Contribution to conferencePaperAcademic

File
Fiber Bragg gratings
Composite structures
Delamination
Derivatives
Structural health monitoring

Fabrication and mechanical characterisation of inkjet printed strain gauges

Visser, R., Balda Irurzun, U., Akkerman, R. & Sridhar, A., 28 Jun 2011, LOPE-C 2011. Mildner, W. (ed.). Frankfurt, Germay: OE-a (Organic and Priinted Electronics Association), p. 349-351

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fabrication and mechanical characterisation of inkjet printed strain gauges

Visser, R., Balda Irurzun, U., Akkerman, R. & Sridhar, A., 2011, LOPE-C 2011. OE-A, p. 349-351

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

3 Citations (Scopus)

Friction in Forming of UD composites

Sachs, U., Akkerman, R., Haanappel, S., ten Thije, R. H. W. & de Rooij, M. B., 2011, The 14th International ESAFORM Conference on Material Forming. Menary, G. (ed.). Belfast, UK: AIP Conference Proceedings, p. 984-989

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

49 Downloads (Pure)

Friction in Forming of UD Composites

Loendersloot, R. (ed.), Sachs, U., Akkerman, R., ten Thije, R. H. W. & de Rooij, M. B., 2011, p. 13-13. 1 p.

Research output: Contribution to conferencePaperAcademic

File
75 Downloads (Pure)

Friction Testing of Thermoplastic Composites

Sachs, U., Haanappel, S., Rietman, B. & Akkerman, R., 28 Mar 2011, 32nd SAMPE Europe International Technical Conference & Forum (SEICO 11): New Material Characteristics to Cover New Application Needs. Erath, M. A. (ed.). Curran Associates Inc., p. 181-191

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Thermoplastics
Friction
Composite materials
Testing
Computer aided engineering
3 Citations (Scopus)
19 Downloads (Pure)

Geometric optimisation of a gurney flap hinge-less deployment system for a helicopter model blade

Paternoster, A., Loendersloot, R., de Boer, A. & Akkerman, R., 13 Sep 2011, Proceeding of the European Rotorcraft Forum. Milaan, Italy: ERF, p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

File
Hinges
Helicopters
Towers
Wind tunnels
Tunnels
1 Citation (Scopus)
40 Downloads (Pure)

Geometric Optimisation of Hinge-less Deployment System for an Active Rotorblade

Paternoster, A., Loendersloot, R., de Boer, A. & Akkerman, R., 18 Sep 2011, Proceedings of ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (CD Rom). Sattelmayer, T. (ed.). Phoenix, USA: American Society of Mechanical Engineers (ASME), p. 1-7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Control surfaces
Hinges
Aerodynamics
Actuators
Topology
5 Downloads (Pure)

Implementation of Inkjet Printing in Emerging Textile based Smart Applications

Balda Irurzun, U. & Akkerman, R., 10 Jan 2011, SAMPE Benelux Student Seminar: Book of Abstracts 2011. Gent, Belgium: Ghent University & Acrosoma, p. 3-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File
11 Citations (Scopus)
82 Downloads (Pure)

Influence of physical aging on impact embrittlement of uPVC pipes

Visser, R., Bor, T. C., Wolters, M., Warnet, L. & Govaert, L. E., 2011, In : Plastics rubber and composites. 40, 5, p. 201-212

Research output: Contribution to journalArticleAcademic

Open Access
File
1 Citation (Scopus)
24 Downloads (Pure)

In-Plane Shear Characterisation of Uni-Directionally Reinforced Thermoplastic Melts

Haanappel, S., ten Thije, R. H. W., Sachs, U., Rietman, B. & Akkerman, R., 2011, The 14th International ESAFORM Conference on Material Forming 2011 proceedings. Menary, G. (ed.). Belfast: AIP Conference Proceedings, p. 930-935

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
46 Downloads (Pure)

Multi-layer thermoplastic composites manufacturing processes: simulations and experiments

ten Thije, R. & Haanappel, S., 28 Mar 2011, 32nd SAMPE Europe International Technical Conference & Forum (SEICO 11): New Material Characteristics to Cover New Application Needs. Erath, M. A. (ed.). Curran Associates Inc., p. 173-180

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
15 Downloads (Pure)

On a novel approach for optimizing composite materials panel using surrogate models

De Guido, S., Akcay-Perdahcioglu, D., Geijselaers, H. J. M. & de Boer, A., 21 Sep 2011, Proceedings of the 3rd ECCOMAS. Rolfes, R. & Jansen, E. L. (eds.). Hannover: Leibniz Universität, p. 439-446

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Buckling
Composite materials
Constitutive equations
Thermoplastics
Boundary conditions
20 Downloads (Pure)

Process simulations for composites forming of UD tape laminates

Rietman, B., Haanappel, S., Sachs, U. & Akkerman, R., 7 Jun 2011.

Research output: Contribution to conferencePaperAcademic

File
47 Downloads (Pure)

Real-time context aware reasoning in on-board intelligent traffic systems: An Architecture for Ontology-based Reasoning using Finite State Machines

Stoter, A., Dalmolen, S., Drenth, E., Cornelisse, E. & Mulder, W., 2011, Proceedings of the3rd International Conference on Agents and Artificial Intelligence. SCITEPRESS, p. 637-642

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

File
5 Citations (Scopus)
18 Downloads (Pure)

Structural Health Monitoring of an Advanced Composite Aircraft Structure Using a Modal Approach

Ooijevaar, T. H., Loendersloot, R., Warnet, L., Akkerman, R. & de Boer, A., 2011, Proceedings of the 8th International Workshop on Structural Health Monitoring 2011. Chang, F. K. & Guemes, A. (eds.). Lancaster, Pennsylvania, U.S.A.: DEStech Publications, Inc, p. 1053-1061

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Structural health monitoring
Strain energy
Aircraft
Mechanical properties
Composite materials

Towards a process simulation tool for the laseer assisted tape placement process

Grouve, W. J. B., Warnet, L. & Akkerman, R., 7 Jun 2011, 14th European Conference on Composite Materials. L. Kollar (ed.). ECCM14, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Downloads (Pure)

Vibration based structural health monitoring and the modal strain energy damage index algorithm applied to a composite T-beam

Loendersloot, R., Ooijevaar, T. H., Warnet, L., de Boer, A. & Akkerman, R., 2011, Vibration and Structural Acoustics Analysis - Current Research and Related Technologies. Vasques, C. M. A. & Dias Rodrigues, J. (eds.). Dordrecht: Springer, p. 121-150 30 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Structural health monitoring
Strain energy
Numerical models
Delamination
Composite materials

Viscoelastic behavior and durability of steel wire - reinforced polyethylene pipes under a high internal pressure

Ivanov, S., Anoshkin, A. N. & Zuyko, V. Y., 2011, In : Mechanics of composite materials. 47, 2, p. 193-202

Research output: Contribution to journalArticleAcademicpeer-review

2010
4 Citations (Scopus)
40 Downloads (Pure)

Actuators for smart applications

Paternoster, A., de Boer, A., Loendersloot, R. & Akkerman, R., 28 Sep 2010, Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (CD Rom). D. Brei & M. Frecker (eds.). New York, USA: American Society of Mechanical Engineers (ASME), p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Actuators
162 Downloads (Pure)

An inktjet printing-based process chain for conductive structures on printed circuit board materials

Sridhar, A., 12 May 2010, Enschede: University of Twente. 149 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

File
Printed circuit boards
Printing
Electroless plating
Lithography
Plasmas
36 Downloads (Pure)

Automated Double Cantilever Beam test system – A two-axis moving camera setup controlled by image analysis for crack recognition

van de Zand, J. & Akkerman, R., 2010. 2 p.

Research output: Contribution to conferencePaperAcademic

File

Compressibility of carbon woven fabrics with carbon nanotubes/nanofibres grown on the fibres

Lomov, S. V., Gorbatikh, L., Kotanjac, Z., Koysin, V., Houlle, M., Rochez, O., Karahan, M. & Verpoest, I., 2010, In : Composites science and technology. p. -

Research output: Contribution to journalArticleAcademicpeer-review

Compressibility of CNT-Grafted Fibrous Reinforcements: A Theory

Lomov, S. V., Koysin, V., Karahan, M., Godara, A., Gorbatikh, L. & Verpoest, I., 2010, In : International journal of material forming. 3, 1, p. 627-630

Research output: Contribution to journalArticleAcademicpeer-review

7 Citations (Scopus)

Compressibility of CNT-Grafted Fibrous Reinforcements: A Theory

Lomov, S. V., Koysin, V., Karahan, M., Godara, A., Gorbatikh, L. & Verpoest, I., 2010, In : International journal of material forming. 3, Suppl., p. 627-630

Research output: Contribution to journalArticleAcademic

10 Citations (Scopus)
41 Downloads (Pure)

Consolidation process model for film stacking glass/PPS laminates

Grouve, W. J. B. & Akkerman, R., 2010, In : Plastics rubber and composites. 39, 3-5, p. 208-215

Research output: Contribution to journalArticleAcademicpeer-review

File

Constitutive modelling of UD reinforced thermoplastic laminates

Haanappel, S., ten Thije, R. H. W. & Akkerman, R., 11 Jul 2010, 10th International Conference on Flow Processes in Composite Materials. V. Michaud (ed.). Ascona, Switserland: EPFL-ETH, p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

79 Downloads (Pure)

Constitutive modelling of UD reinforced thermoplastic laminates

Haanappel, S., ten Thije, R. H. W. & Akkerman, R., 2010.

Research output: Contribution to conferencePaperAcademic

File
4 Citations (Scopus)
14 Downloads (Pure)

Deformability of a textile reinforcement modified with nanofibres

Koysin, V., Kotanjac, Z., Lomov, S. V., Gorbatikh, L., Warnet, L. & Akkerman, R., 26 Oct 2010, Recent Advances in Textile Composites: Proceedings of the 10th International Conference on Textile Composit. C. Binetruy & F. Boussu (eds.). Lille, France: DEStech Publications, Inc, p. 181-186 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
18 Downloads (Pure)

Development of a multigrid finite difference solver for benchmark permeability analysis

Loendersloot, R., Grouve, W. J. B., Akkerman, R. & de Boer, A., 11 Jul 2010, Proceedings of the 10th International Conference on Flow Processes in Composite Materials. Michaud, V. (ed.). Ascona, Switserland: EPFL-ETH, p. 1-5 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
2 Citations (Scopus)

Experimental characterization of fibre-reinforced composites improved with nanofibres or nanotubes

Koysin, V., Warnet, L. & Akkerman, R., 4 Jul 2010, 14th International Conference on Experimental Mechanics. F. Bremand (ed.). Poitiers, France: ICEM14, p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

26 Downloads (Pure)

Experimental characterization of fibre-reinforced composites improved with nanofibres or nanotubes

Koysin, V., Warnet, L. & Akkerman, R., 2010. 10 p.

Research output: Contribution to conferencePaperAcademic

File

Finite element simulations of laminated composites forming processes

ten Thije, R. H. W. & Akkerman, R., 2010, In : International journal of material forming. 3, 1, p. 715-718

Research output: Contribution to journalArticleAcademicpeer-review

6 Citations (Scopus)

Finite element simulations of laminated composites forming processes

ten Thije, R. H. W. & Akkerman, R., 2010, In : International journal of material forming. 3, Suppl., p. 715-718

Research output: Contribution to journalArticleAcademic

49 Downloads (Pure)

Forming predictions of UD reinforced thermoplastic laminates

Haanappel, S., ten Thije, R. H. W. & Akkerman, R., 2010.

Research output: Contribution to conferencePaperAcademic

File