Research Output 1984 2020

Filter
Conference contribution
2019

A Multi-scale Friction Model for Hot Stamping

Venema, J., Hazrati, J., Matthews, D., Atzema, E. & van den Boogaard, T., 2019, Hot Sheet Metal Forming of High-Performance Steel CHS2: 7th International Conference, June 2-5, 2019, Luleå, Sweden: proceedings. Oldenburg, M., Hardell, J. & Casellas, D. (eds.). Auerbach: Verlag Wissenschaftliche Scripten, p. 629-636

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Experimental investigation of pinching phenomena in cold rolling of thin steel sheets

Cometa, A., Geijselaers, H. J. M., Van Den Boogaard, A. H., Wentink, D. J., Hol, C. W. J., Jacobs, L. J. M. & Kampmeijer, L., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). American Institute of Physics, 040026. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

cold rolling
steel
defect
mill
steels
4 Downloads (Pure)

Laser-induced periodic surface structures (LIPSS) manufacturing by defocused laser processing

Mezera, M. & Römer, G. R. B. E., 4 Mar 2019, Laser-based Micro- and Nanoprocessing XIII. Klotzbach, U., Watanabe, A. & Kling, R. (eds.). Washington DC: SPIE, Vol. 10906. 11 p. 109060U. (Proceedings of the SPIE; vol. 10906).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File
manufacturing
lasers
periodic variations
atomic force microscopy
laser beams

Measuring the suitability of rooms for higher education

Oude Vrielink, R. A., Nijhuis-Boer, V. M., Hans, E. W. & van Hillegersberg, J., 4 Mar 2019, ICEIT 2019: Proceedings of the 2019 8th International Conference on Educational and Information Technology. Association for Computing Machinery (ACM), p. 120-123 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Education
Curricula
2018
1 Citation (Scopus)

A master-curve for the shear degradation of rolling bearing greases

Zhou, Y., Bosman, R. & Lugt, P. M., 1 Jan 2018, 73rd Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2018. Society of Tribologists and Lubrication engineers (STLE), p. 275-277 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)

An insight in friction and wear mechanisms during hot stamping

Venema, J., Hazrati Marangalou, J., Matthews, D. & Van Den Boogaard, T., 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). Trans Tech Publications Ltd, Vol. 767 KEM. p. 131-138 8 p. (Key Engineering Materials; vol. 767 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stamping
Wear of materials
Friction
Sheet metal
Metal coatings
33 Downloads (Pure)

Modeling crack initiation in Al-Si coating during heating/quenching phase of hot stamping process

Zaman, S. B., Hazrati Marangalou, J., de Rooij, M. B., Matthews, D. T. A., Venema, J. & van den Boogaard, A. H., 3 Jul 2018, 11th Forming Technology Forum Zurich 2018: Experimental and numerical methods in the FEM based crack prediction. Hora, P. (ed.). ETH Zurich, Switzerland, p. 87-92 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Stamping
Crack initiation
Quenching
Heating
Coatings

Multi-scale contact modeling of coated steels for sheet metal forming applications

Shisode, M., Hazrati Marangalou, J., Mishra, T., De Rooij, M. & Van Den Boogaard, T., 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). Trans Tech Publications Ltd, p. 223-231 9 p. (Key Engineering Materials; vol. 767).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Steel
Metal forming
Sheet metal
Zinc
Textures

Picosecond pulsed laser ablation of liquid covered stainless steel: Effect of liquid layer thickness on ablation efficiency

van der Linden, S., Hagmeijer, R. & Römer, G. R. B. E., 20 Aug 2018, 19th International Symposium on Laser Precision Microfabrication, LPM 2018. 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

laser ablation
ablation
stainless steels
pulsed lasers
liquids
50 Downloads (Pure)

Rail Wear Estimation for Predictive Maintenance: a strategic approach

Meghoe, A. A., Loendersloot, R., Bosman, R. & Tinga, T., 6 Jul 2018, Proceedings of the European Conference of the PHM Society. Kulkarni, C. & Tinga, T. (eds.). 1 ed. Utrecht: PHM society, Vol. 4. 11 p. 370

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Rails
Wear of materials
Railroad tracks
Wheels
Service life
8 Downloads (Pure)

Temperature dependent micromechanics-based friction model for cold stamping processes

Wang, C., Hazrati, J., de Rooij, M. B., Veldhuis, M., Aha, B., Georgiou, E., Drees, D. & van den Boogaard, A. H., 6 Aug 2018, Journal of physics: Conference series. 1 ed. IOP Science, Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
stamping
micromechanics
metal sheets
friction
lubricants
6 Downloads (Pure)

Wear characterization of thick laser cladded high speed steel coatings

Ur Rahman, N., de Rooij, M. B., Matthews, D. T. A., Römer, G. R. B. E., Sinnaeve, M. & Walmag, G., 30 Sep 2018, Proceedings of Asia International Conference on Tribology 2018. p. 364-366 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Alloy steel
Wear of materials
Coatings
Steel
Lasers
2017
1 Citation (Scopus)

Improving Casing Integrity by Induction Brazing of Casing Connections

Ernens, D., Hariharan, H., van Haaften, W. M., Pasaribu, R., Jabs, M. & McKim, R., 15 Mar 2017, SPE/IADC Drilling Conference and Exhibition. Society of Plastic Engineers, 15 p. SPE-184703-MS

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Brazing
Fillers
Torque
Environmental chambers
Dissimilar materials

On-Demand Spare Parts for the Marine Industry with Directed Energy Deposition: Propeller Use Case

Ya, W. & Hamilton, K., 6 Sep 2017, Industrializing Additive Manufacturing: Proceedings of Additive Manufacturing in Products and Applications - AMPA2017. Meboldt, M. & Klahn, C. (eds.). Cham: Springer, p. 70-81 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3D printers
Propellers
Wire
Hardware
Cost reduction
1 Citation (Scopus)

Study of unipolar and bipolar hip prostheses using finite element simulation: Contact stress analysis

Saputra, E., Anwar, I. B., Ismail, R., Jamari, J. & Van Der Heide, E., 2017, Engineering Tribology and Materials - ICETAT 2016. Trans Tech Publications Ltd, Vol. 739 KEM. p. 96-102 7 p. (Key Engineering Materials; vol. 739).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Hip prostheses
Stress analysis
Wear of materials
2016
1 Downloads (Pure)

A numerical investigation on mechanical property improvement of styrene butadine rubber by static straight blade indentation

Setiyana, B., Ismail, R., Jamari, J. & Schipper, D. J., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. Suryana, R., Khairurrijal, Susanto, H., Markusdiantoro, Sutikno & Triyana, K. (eds.). American Institute of Physics, 020078. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
blades
indentation
rubber
styrenes
mechanical properties

Comparison of Lennard-Jones Interaction and Maugis-Dugdale models fo Adhesion for the Adhesive Contact Analysis fo a Bisinusoidal Interface

Bazr Afshan Fadafan, M., de Rooij, M. B., Valefi, M. & Schipper, D. J., 14 Jun 2016, 17th Nordic Symposium on Tribology - Nordtrib 2016. Aulanko, Finland, p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Effect of microstructure and rheology on the grease EHL film thickness at medium speeds

Cyriac, F., Lugt, P. M., Bosman, R., Padberg, C. J. & Venner, C. H., 2016, Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2016. Society of Tribologists and Lubrication engineers (STLE), p. 221-223 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

greases
Lubricating greases
Rheology
rheology
Film thickness
2 Downloads (Pure)

Estimation of appropriate lubricating film thickness in ceramic-on-ceramic hip prostheses

Tauviqirrahman, M., Muchammad, M., Bayuseno, A. P., Ismail, R., Saputra, E. & Jamari, J., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. Suryana, R., Khairurrijal, Susanto, H., Markusdiantoro, Sutikno & Triyana, K. (eds.). American Institute of Physics, 020090. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
film thickness
lubrication
ceramics
fluid films
balls
1 Citation (Scopus)

Finite element analysis of the impingement on the acetabular liner rim due to wear of the acetabular liner surface

Saputra, E., Anwar, I. B., Ismail, R., Jamari, J. & Van Der Heide, E., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. American Institute of Physics, Vol. 1725. 020074. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

impingement
linings
rims
occurrences
simulation

Finite element study of contact pressure distribution on inner and outer liner in the bipolar hip prosthesis

Saputra, E., Anwar, I. B., Ismail, R., Jamari, J. & van der Heide, E., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. American Institute of Physics, Vol. 1725. 020075

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

linings
pressure distribution
sliding contact

Fixation strength analysis of cup to bone material using finite element simulation

Anwar, I. B., Saputra, E., Ismail, R., Jamari, J. & Van Der Heide, E., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. American Institute of Physics, Vol. 1725. 020006. (AIP Conference Proceedings; vol. 1725, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

bones
screws
simulation
cements
installing

Influence of superoleophobic layer on the lubrication performance of partially textured bearing including cavitation

Tauviqirrahman, M., Bayuseno, A. P., Muchammad, M. & Jamari, J., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. Suryana, R., Khairurrijal, Susanto, H., Markusdiantoro, Sutikno & Triyana, K. (eds.). American Institute of Physics, 020091. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
lubrication
cavitation flow
deterioration
metal surfaces
stiction

Mechanical Characterization and Single Asperity Scratch Behaviour of Dry Zinc and Manganese Phosphate Coatings

Ernens, D., de Rooij, M. B., Schipper, D. J., Pasaribu, H. R., van Riet, E. J. & van Haaften, W. M., 14 Jun 2016, 17th Nordic Symposium on Tribology - Nordtrib 2016. Aulanko, Finland, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

34 Downloads (Pure)

Modeling of the wear particles formation in mixed lubricated sliding line contacts

Akchurin, A., Bosman, R. & Lugt, P. M., 2016, Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2016: Las Vegas, Nevada, USA, 15-19 May 2016. Society of Tribologists and Lubrication engineers (STLE), p. 625-628 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
2 Citations (Scopus)

Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion

Jamari, J., Ismail, R., Anwar, I. B., Saputra, E., Tauviqirrahman, M. & Heide, E. V. D., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. Suryana, R., Khairurrijal, Susanto, H., Markusdiantoro, Sutikno & Triyana, K. (eds.). American Institute of Physics, 020030. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

stress distribution
polyethylenes
molecular weight
textures
cavities

The beneficial effect of superhydropobic layer addition on lubrication behavior in bearing application

Muchammad, Tauviqirrahman, M., Pratomo, A. W., Jamari, J. & Schipper, D. J., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. Suryana, R., Khairurrijal, Susanto, H., Markusdiantoro, Sutikno & Triyana, K. (eds.). Semarang, Indonesia: American Institute of Physics, p. - 020047. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

lubrication
stiction
energy conversion
pressure distribution
shear stress
2015

A Numerical Investigation of Mechanical Behavior of Unfilled Styrene Butadiene Rubber by Static Straight Blade Indentation

Setiyana, B., Ismail, R., Jamari, J. & Schipper, D. J., 2015, Proceedings of Malaysian International Tribology Conference 2015. Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin Abdollah (eds.). Penang, Malaysia: MITC2015, p. 68-69

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

A Numerical Investigation on Mechanical Property Improvement of Styrene Butadiene Rubber by Static Straight Blade Indentation

Setiyana, B., Ismail, R., Jamari, J. & Schipper, D. J., 2015, International Conference on Advance Materials Science and Technology (ICAMST). Sutikno, S. T. (ed.). Semaring, Indonesia: Diponegoro University, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

20 Downloads (Pure)

Contact mechanics and friction for transversely isotropic viscoelastic materials

Mokhtari, M., Schipper, D. J., Vleugels, N. & Noordermeer, J. W. M., 16 Sep 2015, International Tribology Conference 2015 (ITO). Yoshimoto, S. & Hashimoto, H. (eds.). Tokyo, Japan: JAST: Japanese Society of Tribologists, p. 34-35 (17pA-07).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
friction
cartilage
Cartesian coordinates
muscles
rubber

Friction in fiber-fiber contact : An experimental setup

Ismail, N., de Vries, E. G., de Rooij, M. B., Zini, N. H. M. & Schipper, D. J., 2015, Proceedings of Malaysian International Tribology Conference 2015. Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin Abdollah (eds.). Kuala Lumpur, Malysia: Malaysian Tribology Society, p. 135-136

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Implementation of a model for abrasive wear to develop a predictive maintenance concept for systems operating in sandy conditions

Woldman, M., Tinga, T., van der Heide, E. & Masen, M. A., 2015, 20th International Conference on Wear of Materials. Filip, P. (ed.). Toronto, Canada: Elsevier, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

16 Downloads (Pure)

Short-Aramid Fibres in Elastomers for Improved Tribology

Vleugels, N., Noordermeer, J. W. M. & Schipper, D. J., 29 Jun 2015, Proceedings International Rubber Conference, DKT 2015, Nürnberg, Germany, 29 June – 2 July, 2015. Nürnberg, Germany, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

File
6 Downloads (Pure)

Silent and safe roadtrafic project: an optimization of the tyre-road interaction on noise and wet grip

Bekke, D., Wijnant, Y., Schipper, D., Bobbink, B., Oude Lansink, G. & Stevens, R., 31 May 2015, Proceedings of the 10th European Conference on Noise Control, Euronoise 2015. Glorieux, C. (ed.). European Acoustics Association, p. 1345-1350 6 p. (Proceedings of the European Conference on Noise Control (EURONOISE); vol. 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Open Access
File

Study on the biocompatibility and wear of stainless steel 316L and UHMWPE materials

Anwar, I. B., Saputra, E., Ismail, R., Jamari, J. & van der Heide, E., 2015, Proceedings of Malaysian International Tribology Conference 2015. Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin Abdollah (eds.). Kuala Lumpur, Malaysia: Malaysian Tribology Society, p. 56-58

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Tactile friction of laser textured surfaces

Zeng, X., Zhang, S., Rodriguez Urribarri, A. & van der Heide, E., 27 Jul 2015, 1st International Conference on Applied Surface Science (ICASS). Huang, W., Kobayashi, H., Montemor, F., Opila, R. & Schaaf, P. (eds.). Shanghai, China: Elsevier, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The Contact Area of Elastomers as a Function of the Sliding Velocity

Rodriguez, N. V., Khafidh, M., Masen, M. A. & Schipper, D. J., 2015, Proceedings of Malaysian International Tribology Conference 2015. Penang, Malaysia: Malaysian Tribology Society, p. 90-91

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

The Effect of Boundary Slip and Cavitation on Hydrodynamic Pressure Generation in Pocket Bearings

Muchammad, M., Tauviqirrahman, M., Pratomo, A. W., Jamari, J. & Schipper, D. J., 2015, International Conference on Advance Materials Science and Technology (ICAMST). Sutikno, S. K. (ed.). Semarang, Indonesia, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The effect of the wear rate on impingement failure confirming the relation between impingement failure and wear of the acetabular liner surface based on finite element simulation

Saputra, E., Anwar, I. B., Ismail, R., Jamari, J. & van der Heide, E., 2015, Proceedings of Malaysian International Tribology Conference 2015. Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin Abdollah (eds.). Kuala Lumpur, Malaysia: Malaysian Tribology Society, p. 54-55

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Theoretical groundwork: An Extension to the Double Hertz Model for Adhesion between Elastic Cylinders

Zini, N. H. M., de Rooij, M. B., Ismail, N., Schipper, D. J. & Akchurin, A., 2015, Proceedings of Malaysian International Tribology Conference 2015. Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin Abdollah (eds.). Kuala Lumpur, Malysia: Malaysian Tribology Society, p. 88-89

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Theoretical Investigation of Texture Depth Effect on the Lubrication Performance in Slip Pocketed Bearing Including Cavitation

Muchammad, M., Tauviqirrahman, M., Pratomo, A. W., Jamari, J. & Schipper, D. J., 2015, Proceedings of Malaysian International Tribology Conference 2015. Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin Abdollah (eds.). Kuala Lumpur, Malaysia: MYTRIBOS, p. 251-252

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The Tribological Behaviour of a Newly Developed Water Absorbable Skin Equivalent Compared to Isolated Human Skin during Sliding

Morales Hurtado, M., Zeng, X., Peppelman, P., van Erp, P. & van der Heide, E., 16 Sep 2015, International Tribology Conference ITC 2015. Tokyo, Japan: Japanse Society of Tribogists, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Tribological Properties of Elastomers as Influenced by Embedded Short Aramid Fibres

Vleugels, N., Noordermeer, J. W. M., Mokhtari, M. & Schipper, D. J., 15 Oct 2015, Book of Abstracts 2nd Asia Pacific Rubber Conference 2015. Nakason, C. (ed.). p. 70-70

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

2014
2 Citations (Scopus)

Demanding it All from the Novice Mechanical Engineer through Design and Manufacture

Masen, M. A., Brand, A., Yan, Y., Varley, J., Spence, P. & Childs, P., 4 Sep 2014, Proceedings of the E&PDE 2014 16th International conference on Engineering and Product Design. Eger, A. O. & Eggink, W. (eds.). Enschede: The Design Society, p. 669-674

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Engineers
Product design
Communication
Education
Health

Experimental study of free surface grease flow subjected to centrifugal forces

Li, J., Westerberg, L. G., Höglund, E., Baart, P. & Lugt, P. M., 10 Jun 2014, Proceedings of 16th Nordic Symposium on Tribology - NORDTRIB 2014. Nielsen, L. P., Sivebaek, I. M., Stensig Eskildsen, S., Louring, S. & Larsen, L. E. (eds.). Aarhus, Denmark: Danish Technological Institute, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)

Sorption-based vibration-free cooler for the METIS instrument on E-ELT

Wu, Y., Vermeer, C. H., Holland, H. J., Doornink, J., Benthem, B., Boom, E. & ter Brake, H. J. M., 17 Jun 2014, Advances in Cryogenic Engineering: Transactions of the International Cryogenic Materials Conference, CEC : Anchorage, Alaska, USA ; 17-21 June 2013 . Weisend II, J. G. (ed.). Anchorage, Alaska: American Institute of Physics, p. 17-21 (AIP Conference Proceedings; vol. 1573).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

free vibration
coolers
sorption
telescopes
cooling

Tactility of Laser Textured Surfaces

Zeng, X., Rodriguez Urribarri, A., Zhang, G. & van der Heide, E., 28 Dec 2014, The Wuhan University International Forum for Interdisciplinary Sciences and Engineering. Wuhan, China, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

The synergy effect between graphene oxide and poly(ethylene glycol) for the boundary lubrication of CoCrMo alloy in aqueous system

Yan, J., Zeng, X., van der Heide, E. & Ren, T., 27 Apr 2014, Tribology towards sustainable development: Proceedings of the 7th China International Symposium on Tribology. XuZhou, China, p. 336-338

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2013

A particle shape definition related to third-body abrasive wear

Woldman, M., van der Heide, E., Tinga, T. & Masen, M. A., 8 Sep 2013, Proceedings of 5th World Tribology Conference. Ciulli, E. & Raparelli, T. (eds.). Turino, Italy: Centro Congressi Internatzionale, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Boundary lubrication of stainless steel and CoCrMo materials based on phosphorous or boron containing additives

Yan, J., Zeng, X., van der Heide, E. & Ren, T., 8 Sep 2013, Proceedings of 5th World Tribology Conference. Ciulli, E. & Raparelli, T. (eds.). Turino, Italy: Centro Congressi Internatzionale, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review