Antonius H. van den Boogaard

prof.dr.ir.

  • 1500 Citations
  • 18 h-Index
19942019
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

2019

A noninvasive MRI based approach to estimate the mechanical properties of human knee ligaments

Naghibi, H., Mazzoli, V., Gijsbertse, K., Hannink, G., Sprengers, A., Janssen, D., van den Boogaard, T. & Verdonschot, N., May 2019, In : Journal of the mechanical behavior of biomedical materials. 93, p. 43-51 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Ligaments
Magnetic resonance imaging
Mechanical properties
Stiffness
Bone

Experimental investigation of pinching phenomena in cold rolling of thin steel sheets

Cometa, A., Geijselaers, H. J. M., Van Den Boogaard, A. H., Wentink, D. J., Hol, C. W. J., Jacobs, L. J. M. & Kampmeijer, L., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). American Institute of Physics, 040026. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

cold rolling
steel
defect
mill
steels
Open Access
File
Metal forming
State estimation
Industrial plants
Interpolation
Physics
5 Downloads (Pure)
Open Access
File
Finite Element Modeling
Buoyancy
Pipe
Contacts (fluid mechanics)
Moment

Laser assisted forming and phase reversal heat treatment of metastable austenitic stainless steel

Kooiker, H., 17 May 2019, Enschede: University of Twente. 129 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

2 Citations (Scopus)
31 Downloads (Pure)

Microscopic investigation of damage mechanisms and anisotropic evolution of damage in DP600

Aşık, E. E., Perdahcıoğlu, E. S. & van den Boogaard, A. H., 2 Jan 2019, In : Materials Science and Engineering A. 739, p. 348-356 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Martensite
damage
voids
Steel
martensite

On the Choice of Basis in Proper Orthogonal Decomposition-Based Surrogate Models

de Gooijer, B. M., Hazrati Marangalou, J., Geijselaers, B. & van den Boogaard, A. H., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming: ESAFORM 2019. Galdos, L., Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Madariaga, A. & Saez de Buruaga, M. (eds.). AIP, 6 p. (AIP Conference Proceedings; vol. 2113, no. 010001).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Decomposition
Metal forming
Costs
4 Downloads (Pure)

Robust Optimization and Tailoring of Scatter in Metal Forming Processes

Nejadseyfi, O., 25 Aug 2019, Enschede: University of Twente. 179 p.

Research output: ThesisPhD Thesis - Research external, graduation UTAcademic

Open Access
File
Metal Forming
Robust Optimization
Metal forming
Scatter
Tolerance

Tailoring Material Scatter for Metal Forming Processes based on Inverse Robust Optimization

Nejadseyfi, O., Geijselaers, B. & van den Boogaard, A. H., 8 May 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming. AIP Publishing LLC, Vol. 2113. 6 p. (AIP conference proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Metal forming
Costs
Specifications

Tribological interactions and modelling of friction in hot stamping

Venema, J., 25 Sep 2019, Enschede: University of Twente. 124 p.

Research output: ThesisPhD Thesis - Research external, graduation UTAcademic

Open Access
File
Stamping
Wear of materials
Friction
Formability
Sheet metal
2018
1 Citation (Scopus)
64 Downloads (Pure)

A class of rate-independent lower-order gradient plasticity theories: Implementation and application to disc torsion problem

Perdahcioğlu, E. S., Soyarslan, C., Asik, E. E., van den Boogaard, T. & Bargmann, S., 14 Aug 2018, In : Materials. 11, 8, 1425.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Torsional stress
Plasticity
Hardening
Crystals
Plastic flow
7 Downloads (Pure)

A constitutive law based on the self-consistent homogenization theory for improved springback simulation of a dual-phase steel

Torkabadi, A., Perdahcioǧlu, E. S. & van den Boogaard, A. H., 6 Aug 2018, Journal of Physics: Conference series. 1 ed. Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
homogenizing
steels
Bauschinger effect
unloading
simulation
23 Downloads (Pure)

A continuum model for the effect of dynamic recrystallization on the stress-strain response

Kooiker, H., Perdahcioğlu, E. S. & van den Boogaard, A. H., 22 May 2018, In : Materials. 11, 5, 867.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Dynamic recrystallization
Strain rate
Hot working
Austenitic stainless steel
High strength steel
29 Downloads (Pure)

Analysis of yield locus description on springback behaviour of CR700Y980T-DP steel

Grubenmann, M., Barth, K., Heingartner, J., Manopulo, N., Hora, P., Torkabadi, A., Van Den Boogaard, T. & Rösen, H., 21 Sep 2018, In : IOP Conference Series: Materials Science and Engineering. 418, 1, 012108.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
Steel
Hardening
Bending tools
Kinematics
Compaction

An efficient strategy to describe the propagation of variation through multi-stage metal forming processes

De Gooijer, B. M., Hazrati-Marangalou, J., Geijselaers, H. J. M. & Van Den Boogaard, A. H., 2018, Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics. Moens, D., Desmet, W., Pluymers, B. & Rottiers, W. (eds.). KU Leuven - Departement Werktuigkunde, p. 5133-5141 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

metal forming
Metal forming
propagation
Singular value decomposition
decomposition
2 Citations (Scopus)

An insight in friction and wear mechanisms during hot stamping

Venema, J., Hazrati Marangalou, J., Matthews, D. & Van Den Boogaard, T., 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). Trans Tech Publications Ltd, Vol. 767 KEM. p. 131-138 8 p. (Key Engineering Materials; vol. 767 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stamping
Wear of materials
Friction
Sheet metal
Metal coatings
6 Downloads (Pure)

Evaluation and assessment of non-normal output during robust optimization

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2018, In : Structural and multidisciplinary optimization. 1

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Robust Optimization
Output
Metal forming
Evaluation
Normal distribution
3 Citations (Scopus)
39 Downloads (Pure)

Feedforward control of sheet bending based on force measurements

Havinga, J., van den Boogaard, T., Dallinger, F. & Hora, P., 1 Jan 2018, In : Journal of Manufacturing Processes. 31, p. 260-272 13 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Feedforward control
Force measurement
Feedback control
Deep drawing
Metal forming

First time right production of metal conveyor belts by active control

Levharkar, A., 19 Oct 2018, Enschede: University of Twente. 79 p.

Research output: ThesisPd Eng ThesisAcademic

10 Downloads (Pure)

Friction in Sheet Metal Forming: Forming Simulations of Dies in Try-Out

Sigvant, M., Pilthammar, J., Hol, J., Wiebenga, J. H., Chezan, T., Carleer, B. & Van Den Boogaard, A. H., 6 Aug 2018, Journal of Physics, Conference series. 1 ed. Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
metal forming
metal sheets
friction
tribology
simulation
33 Downloads (Pure)

Friction in Sheet Metal Forming Simulations: Modelling of New Sheet Metal Coatings and Lubricants

Sigvant, M., Pilthammar, J., Hol, J., Wiebenga, J. H., Chezan, T., Carleer, B. & Van Den Boogaard, A. H., 21 Sep 2018, In : IOP Conference Series: Materials Science and Engineering. 418, 1, 012093.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
Metal coatings
Metal forming
Sheet metal
Lubricants
Friction

Investigation of anisotropic damage evolution in dual phase steels

Asik, E. E., Perdahcioglu, E. S. & van den Boogaard, A. H., Feb 2018. 1 p.

Research output: Contribution to conferenceAbstractAcademic

steels
damage
martensite
ferrites
metal forming

INVESTIGATION OF MICROSTRUCTURAL FEATURES ON DAMAGE ANISOTROPY

Asik, E. E., Perdahcioglu, E. S. & van den Boogaard, A. H., Jul 2018, 11th Forming Technology Forum 2018. Zurich, Switzerland: IVP - ETH Zurich, p. 71-71 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Martensite
Anisotropy
Ferrite
Steel sheet
Stress-strain curves

Materials testing methods for expandable pipes

Bin Haji Nawawi, M. A., 9 May 2018, Enschede: University of Twente. 93 p.

Research output: ThesisPd Eng ThesisAcademic

25 Downloads (Pure)

Modeling crack initiation in Al-Si coating during heating/quenching phase of hot stamping process

Zaman, S. B., Hazrati Marangalou, J., de Rooij, M. B., Matthews, D. T. A., Venema, J. & van den Boogaard, A. H., 3 Jul 2018, 11th Forming Technology Forum Zurich 2018: Experimental and numerical methods in the FEM based crack prediction. Hora, P. (ed.). ETH Zurich, Switzerland, p. 87-92 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Stamping
Crack initiation
Quenching
Heating
Coatings

Multi-scale contact modeling of coated steels for sheet metal forming applications

Shisode, M., Hazrati Marangalou, J., Mishra, T., De Rooij, M. & Van Den Boogaard, T., 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). Trans Tech Publications Ltd, Vol. 767 KEM. p. 223-231 9 p. (Key Engineering Materials; vol. 767 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Steel
Metal forming
Sheet metal
Zinc
Textures

On anisotropy and non-proportional loading in damage and fracture models

van den Boogaard, A. H., Jul 2018, 11th Forming Technology Forum 2018. Zurich, Switzerland: IVP - ETH Zurich, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Anisotropy
Ductile fracture
Shear deformation
2 Citations (Scopus)
34 Downloads (Pure)

On the nonlinear anelastic behavior of AHSS

Torkabadi, A., Perdahcioğlu, E. S., Meinders, V. T. & van den Boogaard, A. H., 15 Oct 2018, In : International journal of solids and structures. 151, p. 2-8 7 p.

Research output: Contribution to journalArticleAcademicpeer-review

Unloading
unloading
Plastic deformation
nonlinearity
Nonlinearity
1 Citation (Scopus)
9 Downloads (Pure)

Robust optimization based on analytical evaluation of uncertainty propagation

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 20 Nov 2018, In : Engineering Optimization. 23 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Uncertainty Propagation
Robust Optimization
Scatter
Metamodel
Black Box
5 Downloads (Pure)

Temperature dependent micromechanics-based friction model for cold stamping processes

Wang, C., Hazrati, J., de Rooij, M. B., Veldhuis, M., Aha, B., Georgiou, E., Drees, D. & van den Boogaard, A. H., 6 Aug 2018, Journal of physics: Conference series. 1 ed. IOP Science, Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
stamping
micromechanics
metal sheets
friction
lubricants
3 Citations (Scopus)
2 Downloads (Pure)

The effects of temperature on friction and wear mechanisms during direct press hardening of Al-Si coated ultra-high strength steel

Venema, J., Hazrati Marangalou, J., Matthews, D. T. A., Stegeman, R. A. & van den Boogaard, A. H., 15 Jul 2018, In : Wear. 406-407, p. 149-155 7 p.

Research output: Contribution to journalArticleAcademicpeer-review

high strength steels
High strength steel
hardening
Hardening
friction
1 Citation (Scopus)
21 Downloads (Pure)

The evolution of mechanical properties of AISI 301 as a result of phase reversion heat treatment, experiment and modeling

Kooiker, H., Perdahcioǧlu, E. S. & van den Boogaard, T., 6 Aug 2018, In : Journal of physics: Conference series. 1063, 1, 7 p., 12106.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
heat treatment
mechanical properties
austenite
hardness
austenitic stainless steels
29 Downloads (Pure)

Tool Texturing for Deep Drawing Applications

Hazrati, J., Stein, P., Kramer, P. & Van Den Boogaard, A. H., 21 Sep 2018, In : IOP Conference Series: Materials Science and Engineering. 418, 1, 012095.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
Deep drawing
Texturing
Sheet metal
Textures
Friction
146 Downloads (Pure)

Towards an accurate springback prediction: experiments and modeling

Torkabadi, A., 25 Oct 2018, Enschede: University of Twente. 133 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

Open Access
File
Unloading
Experiments
Constitutive models
High strength steel
Mechanics
2017
12 Downloads (Pure)

A continuum model accounting for the effect of the initial and evolving microstructure on the evolution of dynamic recrystallization

Kooiker, H., Perdahcioglu, E. S. & Van Den Boogaard, T., 2017, XIV International Conference on Computational Plasticity, Fundamentals and Applications, COMPLAS 2017. Onate, E., Owen, D. R. J., Peric, D. & Chiumenti, M. (eds.). International Center for Numerical Methods in Engineering, Vol. 2017-January. p. 308-318 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Dynamic Recrystallization
Dynamic recrystallization
Continuum Model
Grain Size
Austenitic stainless steel
1 Citation (Scopus)
41 Downloads (Pure)

A nonlinear dynamic corotational finite element model for submerged pipes

De Vries, F. H., Geijselaers, H. J. M., Van Den Boogaard, A. H. & Huisman, A., 12 Dec 2017, In : IOP Conference Series: Materials Science and Engineering. 276, 012030.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Pipe
Buoyancy
Gravitation
Ships
Water
2 Citations (Scopus)
2 Downloads (Pure)

Efficient Calculation of Uncertainty Propagation with an Application in Robust Optimization of Forming Processes

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. AIP Publishing LLC, 100004. (AIP Conference Proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Function evaluation
Metal forming
Probability distributions
Mathematical models
Sampling

Estimating product-to-product variations in metal forming using force measurements

Havinga, G. T. & Van Den Boogaard, T., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. American Institute of Physics, Vol. 1896. 070002. (AIP conference proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

metal forming
estimating
products
deep drawing
regression analysis
6 Citations (Scopus)

Friction and Wear Mechanisms During Hot Stamping of AlSi Coated Press Hardening Steel

Loiseaux-Venema, J., Matthews, D. T. A., Hazrati Marangalou, J., Wormann, J. & van den Boogaard, A. H., 2017, In : Wear. p. 137-381

Research output: Contribution to journalArticleAcademicpeer-review

stamping
Stamping
Steel
hardening
Hardening
2 Citations (Scopus)

Implementation and application of a gradient enhanced crystal plasticity model

Soyarslan, C., Perdahcioglu, E. S., Asik, E. E., Van Den Boogaard, A. H. & Bargmann, S., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. American Institute of Physics, Vol. 1896. 160008. (AIP conference proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

plastic properties
gradients
plastics
tensors
crystals
1 Citation (Scopus)
59 Downloads (Pure)

Modelling of anelastic deformation in dual-phase steel for improved springback simulation

Torkabadi, A., Perdahcioǧlu, E. S. & Van Den Boogaard, A. H., 2017, In : Procedia engineering. 207, p. 185-190 6 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Unloading
Steel
Plastics
Fibers
Dislocations (crystals)
63 Downloads (Pure)

Numerical and Experimental Validation of a New Damage Initiation Criterion

Sadhinoch, M., Atzema, E. H., Perdahcioglu, E. S. & van den Boogaard, A. H., 27 Sep 2017, In : Journal of physics: Conference series. 896, 1, 012080.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
damage
computer programs
energy
curves
predictions
voids
crystal structure
single crystals
coalescing
strain distribution

Plasticity and fracture modeling of three-layer steel composite Tribond® 1200 for crash simulation

Eller, T., Ramaker, K., Greve, L., Andres, M. T., Hazrati Marangalou, J. & van den Boogaard, A. H., 2017. 6 p.

Research output: Contribution to conferencePaperAcademicpeer-review

Plasticity
Steel
Composite materials
Bending tests
Constitutive models
26 Downloads (Pure)

Reduce bending moment of high-strength and large-diameter steel pipe

Harun, M. A., 30 Oct 2017, Enschede: University of Twente. 57 p.

Research output: ThesisPd Eng ThesisAcademic

Open Access
File
13 Citations (Scopus)
56 Downloads (Pure)

Sequential improvement for robust optimization using an uncertainty measure for radial basis functions

Havinga, G. T., van den Boogaard, A. H. & Klaseboer, G., Apr 2017, In : Structural and multidisciplinary optimization. 55, 4, p. 1345-1363 19 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Uncertainty Measure
Robust Optimization
Radial Functions
Basis Functions
Metamodeling
8 Citations (Scopus)

The influence of ligament modelling strategies on the predictive capability of finite element models of the human knee joint

Naghibi Beidokhti, H., Janssen, D., van de Groes, S., Hazrati, J., Van den Boogaard, T. & Verdonschot, N., Dec 2017, In : Journal of biomechanics. 65, p. 1-11

Research output: Contribution to journalArticleAcademicpeer-review

Ligaments
Knee Joint
Biomechanical Phenomena
Collateral Ligaments
Kinematics
2016
9 Citations (Scopus)

A comparison between dynamic implicit and explicit finite element simulations of the native knee joint

Naghibi Beidokhti, H., Janssen, D., Khoshgoftar, M., Sprengers, A., Perdahcioglu, E. S., van den Boogaard, A. H. & Verdonschot, N. J. J., 8 Aug 2016, In : Medical engineering & physics. 38, 10, p. 1123-1130

Research output: Contribution to journalArticleAcademicpeer-review

2 Citations (Scopus)

Constitutive modeling of hot horming of austenitic stainless steel 316LN by accounting for recrystallization in the dislocation evolution

Kooiker, H., Perdahcioglu, E. S. & van den Boogaard, A. H., 4 Sep 2016, NUMISHEET 2016: 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. IOP, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Austenitic stainless steel
Recovery
Hot pressing
Hardening
Strain rate
15 Citations (Scopus)

Determination of strain hardening parameters of tailor hardened boron steel up to high strains using inverse FEM optimization and strain field matching

Eller, T., Greve, L., Andres, M. T., Medricky, M., Meinders, V. T. & van den Boogaard, A. H., 25 Sep 2016, In : Journal of materials processing technology. 228, p. 43-58 16 p.

Research output: Contribution to journalArticleAcademicpeer-review

Boron
Steel
Strain hardening
Finite element method
Hardness