• 444 Citations
  • 13 h-Index
1990 …2019
If you made any changes in Pure these will be visible here soon.

Research Output 1990 2019

2019

Experimental investigation of pinching phenomena in cold rolling of thin steel sheets

Cometa, A., Geijselaers, H. J. M., Van Den Boogaard, A. H., Wentink, D. J., Hol, C. W. J., Jacobs, L. J. M. & Kampmeijer, L., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). American Institute of Physics, 040026. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

cold rolling
steel
defect
mill
steels
17 Downloads (Pure)

Finite element modeling of pipe-laying dynamics using corotational elements

de Vries, F. H., Geijselaers, van den Boogaard, A. H. & Huisman, A., 1 Aug 2019, In : International Journal of Computational Methods in Engineering Science and Mechanics. 20, 4, p. 293-307 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Finite Element Modeling
Buoyancy
Pipe
Contacts (fluid mechanics)
Moment
1 Downloads (Pure)

On the Choice of Basis in Proper Orthogonal Decomposition-Based Surrogate Models

de Gooijer, B. M., Hazrati Marangalou, J., Geijselaers, B. & van den Boogaard, A. H., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming: ESAFORM 2019. Galdos, L., Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Madariaga, A. & Saez de Buruaga, M. (eds.). AIP, 6 p. (AIP Conference Proceedings; vol. 2113, no. 010001).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Decomposition
Metal forming
Costs
55 Downloads (Pure)

Optimal design of laminated composites with focus on aircraft structures

Farzan Nasab, F., 29 Mar 2019, Enschede: University of Twente. 196 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

Open Access
File
Laminated composites
Aircraft
Composite structures
Laminates
Skin
18 Downloads (Pure)

Robust Optimization and Tailoring of Scatter in Metal Forming Processes

Nejadseyfi, O., 25 Aug 2019, Enschede: University of Twente. 179 p.

Research output: ThesisPhD Thesis - Research external, graduation UTAcademic

Open Access
File
Metal Forming
Robust Optimization
Metal forming
Scatter
Tolerance

Tailoring Material Scatter for Metal Forming Processes based on Inverse Robust Optimization

Nejadseyfi, O., Geijselaers, B. & van den Boogaard, A. H., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). AIP Publishing LLC, Vol. 2113. 6 p. 120005. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

metal forming
metals
optimization
output
metal
2018
1 Citation (Scopus)
6 Downloads (Pure)

A level-set-based strategy for thickness optimization of blended composite structures

Farzan Nasab, F., Geijselaers, H. J. M., Baran, I., Akkerman, R. & de Boer, A., 15 Dec 2018, In : Composite structures. 206, p. 903-920 18 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Composite structures
Skin
Composite materials
Global optimization
Torsional stress

An efficient strategy to describe the propagation of variation through multi-stage metal forming processes

De Gooijer, B. M., Hazrati-Marangalou, J., Geijselaers, H. J. M. & Van Den Boogaard, A. H., 2018, Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics. Moens, D., Desmet, W., Pluymers, B. & Rottiers, W. (eds.). Katholieke Universiteit Leuven, p. 5133-5141 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

metal forming
Metal forming
propagation
Singular value decomposition
decomposition
25 Downloads (Pure)

Deformation mechanism in compression molding of discontinuous thermoplastic composites

Ali, W., Rasheed, M. I. A., Sachs, U., Geijselaers, H. J. M. & Akkerman, R., 30 May 2018. 2 p.

Research output: Contribution to conferencePaperAcademicpeer-review

Open Access
File
Compression molding
Thermoplastics
Fibers
Composite materials
Fiber reinforced materials
11 Downloads (Pure)

Evaluation and assessment of non-normal output during robust optimization

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2018, In : Structural and multidisciplinary optimization. 1

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Robust Optimization
Output
Metal forming
Evaluation
Normal distribution

Materials testing methods for expandable pipes

Bin Haji Nawawi, M. A., 9 May 2018, Enschede: University of Twente. 93 p.

Research output: ThesisPd Eng ThesisAcademic

1 Citation (Scopus)
18 Downloads (Pure)

Robust optimization based on analytical evaluation of uncertainty propagation

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 20 Nov 2018, In : Engineering Optimization. 23 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Uncertainty Propagation
Robust Optimization
Scatter
Metamodel
Black Box

The Onset of Ironing during Casing Expansion

Assaad, W. A., Wilmink, D., Pasaribu, H. R. & Geijselaers, H. J. M., 2018, p. 1960.

Research output: Contribution to conferenceAbstractAcademic

Cements
Cones
Boreholes
Mechanical properties
Gases
2017
1 Citation (Scopus)
50 Downloads (Pure)

A nonlinear dynamic corotational finite element model for submerged pipes

De Vries, F. H., Geijselaers, H. J. M., Van Den Boogaard, A. H. & Huisman, A., 12 Dec 2017, In : IOP Conference Series: Materials Science and Engineering. 276, 012030.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Pipe
Buoyancy
Gravitation
Ships
Water
2 Citations (Scopus)
2 Downloads (Pure)

Efficient Calculation of Uncertainty Propagation with an Application in Robust Optimization of Forming Processes

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. AIP Publishing LLC, 100004. (AIP Conference Proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Function evaluation
Metal forming
Probability distributions
Mathematical models
Sampling
79 Downloads (Pure)

Generating the Best Stacking Sequence Table for the Design of Blended Composite Structures

Farzan Nasab, F., Geijselaers, H. J. M., Baran, I. & de Boer, A., 1 Jun 2017.

Research output: Contribution to conferencePaperAcademicpeer-review

File
Composite structures
Skin
Aircraft
43 Downloads (Pure)

Investigations on anisotropic fracture mechanics of graphitic foams

Toptop, K., van Eijk, B., Geijselaers, H. J. M. & Hessey, N. P., 23 Jun 2017, In : Results in Physics. 7, p. 2043-2053 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
fracture mechanics
foams
crack initiation
cameras
shear
40 Downloads (Pure)

Reduce bending moment of high-strength and large-diameter steel pipe

Harun, M. A., 30 Oct 2017, Enschede: University of Twente. 57 p.

Research output: ThesisPd Eng ThesisAcademic

Open Access
File
2016

A multi-level set gradient based algorithm for buckling optimization of blended composite structures

Farzan Nasab, F., Geijselaers, H. J. M. & de Boer, A., 2016, 5th Aircraft Structural Design Conference. Manchester: Royal Aeronautical Society, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Composite structures
Buckling
Skin
Composite materials
Global optimization
1 Citation (Scopus)
42 Downloads (Pure)

Interpolation of final geometry and result fields in process parameter space

Misiun, G., Wang, C., Geijselaers, H. & van den Boogaard, T., 4 Jul 2016, NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, Troyes, France, July 4-7, 2016. Saanouni, K. (ed.). EDP Sciences, 8 p. 13006. (MATEC Web of Conferences; vol. 80).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
interpolation
geometry
principal components analysis
routes
rings

Investigation of stress partitioning in a two-phase steel by cyclic shear tests

Perdahcioglu, E. S., Geijselaers, H. J. M. & van den Boogaard, A. H., 12 Sep 2016, Advanced Methods in Material Testing for Sheet Metal Forming. p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

118 Downloads (Pure)

Modeling of tailor hardened boron steel for crash simulation

Eller, T., 10 Jun 2016, Enschede: Universiteit Twente. 156 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

File
Boron
Steel
Crashworthiness
Hardness
Ductility
32 Downloads (Pure)

Parameter Study for Friction Surface Cladding of AA1050 on AA2024-T351

Liu, S., Bor, T. C., Geijselaers, H. J. M. & Akkerman, R., 17 May 2016, Proceedings of the 11th International Symposium on Friction Stir Welding. Cambridge, UK, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

File
12 Citations (Scopus)

Plasticity and fracture modeling of the heat-affected zone in resistance spot welded tailor hardened boron steel

Eller, T., Greve, L., Andres, M. T., Medricky, M., Geijselaers, H. J. M., Meinders, V. T. & van den Boogaard, A. H., 28 Mar 2016, In : Journal of materials processing technology. 234, p. 309-322 14 p.

Research output: Contribution to journalArticleAcademicpeer-review

Boron
Steel
Heat affected zone
Plasticity
Hardness
435 Downloads (Pure)

Simulation of damage evolution during hot ring rolling

Wang, C., 26 May 2016, Enschede: Universiteit Twente. 158 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

File
Forging
Bearings (structural)
Porosity
Finite element method
Steel
16 Downloads (Pure)

The effect of inclusion shape and distribution in bending of DP steel sheet

Nejadseyfi, O., Geijselaers, H. & van den Boogaard, T., 2016. 3 p.

Research output: Contribution to conferencePaperAcademicpeer-review

Open Access
File
104 Downloads (Pure)

The softened heat-affected zone in resistance spot welded tailor hardened boron steel: a material model for crash simulation

Eller, T., Greve, L., Andres, M. T., Medricky, M., Geijselaers, H. J. M., Meinders, V. T. & van den Boogaard, A. H., 22 May 2016, International Conference on Impact Loading of Structures and Materials (ICILSM). Turin, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Heat affected zone
Boron
Steel
Hardness
Welds
23 Downloads (Pure)

Use of Gleeble MAXStrain unit for study of damage development in hot forging

Geijselaers, H. J. M., Wang, C., Miroux, A., Recina, V. & van den Boogaard, A. H., 4 Jul 2016.

Research output: Contribution to conferencePaperAcademicpeer-review

Open Access
File
Forging
Elongation
2015
37 Downloads (Pure)

Cyclic shear behavior of austenitic stainless steel sheet

Geijselaers, H. J. M., Bor, T. C., Hilkhuijsen, P. & van den Boogaard, A. H., 2015, In : Computer methods in materials science. 15, 1, p. 9-18 10 p.

Research output: Contribution to journalArticleAcademic

File
Steel sheet
Austenitic stainless steel
Martensite
Electromagnetic induction
Plastic flow
7 Citations (Scopus)
1 Downloads (Pure)

Friction surface cladding: An exploratory study of a new solid state cladding process

Liu, S., Bor, T. C., van der Stelt, A. A., Geijselaers, H. J. M., Kwakernaak, C., Kooijman, A. M., Mol, J. M. C., Akkerman, R. & van den Boogaard, A. H., 2015, In : Journal of materials processing technology. 229, p. 769-784

Research output: Contribution to journalArticleAcademicpeer-review

Friction
Substrates
Corrosion
Temperature
Aluminum
33 Downloads (Pure)

Friction Surface Cladding of AA1050 on AA2024-T351; influence of clad layer thickness and tool rotation rate

Liu, S., Bor, T. C., Geijselaers, H. J. M. & Akkerman, R., 1 Oct 2015, 4th International conference on Scientific and Technical Advances on Friction stir Welding & Processing, FSWP 2015. San Sebastian, Spain: IK4 Lortek, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Friction
Substrates
Hard facing
Deposits
Defects
13 Citations (Scopus)

Influence of ring growth rate on damage development in hot ring rolling

Wang, C., Geijselaers, H. J. M., Omerspahic, E., Recina, V. & van den Boogaard, A. H., 20 Aug 2015, In : Journal of materials processing technology. 227, p. 268-280

Research output: Contribution to journalArticleAcademicpeer-review

Porosity
Ultrasonic testing
Steel
Rolling mills
Motion control
6 Citations (Scopus)
1 Downloads (Pure)

Large strain cyclic behavior of metastable austenic stainless steel

Geijselaers, H. J. M., Hilkhuijsen, P., Bor, T. C. & van den Boogaard, A. H., 2015, In : Materials science & engineering A. 631, p. 166-172

Research output: Contribution to journalArticleAcademicpeer-review

Stainless Steel
stainless steels
Stainless steel
martensite
Bauschinger effect
10 Downloads (Pure)

Modeling and predicting scan vectors in selective laser melting

Wits, W. W., Bruins, R., Terpstra, L., Huls, R. A. & Geijselaers, H. J. M., Mar 2015.

Research output: Contribution to conferencePosterOther research output

Open Access
File
25 Citations (Scopus)
1 Downloads (Pure)

Multi-scale friction modeling for sheet metal forming: the mixed lubrication regime

Hol, J., Meinders, V. T., Geijselaers, H. J. M. & van den Boogaard, A. H., 26 Dec 2015, In : Tribology international. 85, p. 10-25 16 p.

Research output: Contribution to journalArticleAcademicpeer-review

metal forming
metal sheets
Metal forming
Sheet metal
lubrication
14 Citations (Scopus)

Single scan vector prediction in selective laser melting

Wits, W. W., Bruins, R., Terpstra, L., Huls, R. A. & Geijselaers, H. J. M., 2015, In : AddItive manufacturing. 9, p. 1-6

Research output: Contribution to journalArticleAcademicpeer-review

Melting
Lasers
Scanning
Powder metals
Energy absorption
30 Downloads (Pure)

Thermal and Flow Analysis of Friction Surface Cladding with Varying Clad Layer Thickness

Liu, S., Bor, T. C., Geijselaers, H. J. M. & Akkerman, R., 31 May 2015, International Deep Drawing Research Group 2015, IDDRG. Zhang, S-H., Chen, J. & Jing, H-M. (eds.). Shanghai, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
2014
6 Citations (Scopus)
122 Downloads (Pure)

Influence of feed rate on damage development in hot ring rolling

Wang, C., van den Boogaard, A. H., Omerspahic, E., Recina, V. & Geijselaers, H. J. M., 19 Oct 2014, 11th International conference on technology of plasticity, ICTP 2014. Ishikawa, T. & Mori, K-I. (eds.). Nagoya, Japan: Elsevier, p. 292-297 (Procedia engineering; vol. 81).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Porosity
Preforming
Steel ingots
Automotive engineering
Aerospace engineering

Influence of ring growth rate on damage development in hot ring rolling

Wang, C., Geijselaers, B., Omerspahic, E., Recina, V. & van den Boogaard, T., 15 Sep 2014, 7th Forming Technology Forum: warm and hot forming. Enschede, p. 159-163

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2013
2 Citations (Scopus)
55 Downloads (Pure)

Cladding of Advanced Al Alloys Employing Friction Stir Welding

van der Stelt, A. A., Bor, T. C., Geijselaers, H. J. M., Akkerman, R. & van den Boogaard, A. H., 2013, In : Key engineering materials. 554-557, p. 1014-1021

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Friction stir welding
Fillers
Substrates
Microhardness
Optical microscopy
1 Citation (Scopus)

Modeling of the Austenite-Martensite Transformation in Stainless and TRIP Steels

Geijselaers, H. J. M., Hilkhuijsen, P., Bor, T. C., Perdahcioglu, E. S. & van den Boogaard, A. H., 6 Jul 2013, The 11th International Conference on Numerical Methods in Industrial Forming Processes. Zhang, S-H., Liu, X-H., Gheng, M. & Li, J. (eds.). American Institute of Physics, p. 175-182 (AIP conference proceedings; vol. 1532).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

steel
modeling
texture
thermodynamics
3 Citations (Scopus)
3 Downloads (Pure)

Multi-Stage FE Simulation of Hot Ring Rolling

Wang, C., Geijselaers, H. J. M. & van den Boogaard, A. H., 6 Jul 2013, The 11th International Conference on Numerical Methods in Industrial Forming Processes: NUMIFORM 2013. Zhang, S-H. & Liu, X-H. (eds.). AIP Publishing LLC, p. 1014-1019 (AIP conference proceedings; vol. 1532).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Upsetting (forming)
Piercing
Automotive engineering
Aerospace engineering
Subroutines
16 Citations (Scopus)
11 Citations (Scopus)

The influence of austenite texture on the martensitic transformation of an austenitic stainless steel.

Hilkhuijsen, P., Geijselaers, H. J. M. & Bor, T. C., 2 Mar 2013, In : Journal of alloys and compounds. 577S, p. 609-613

Research output: Contribution to journalArticleAcademicpeer-review

Martensitic transformations
Austenitic stainless steel
Austenite
Textures
Martensite
134 Downloads (Pure)

The influence of texture on phase transformation in metastable austenitic stainless steel

Hilkhuijsen, P., 30 Aug 2013, Enschede: University of Twente. 120 p.

Research output: ThesisPhD Thesis - Research UT, graduation UTAcademic

File
Austenitic stainless steel
Textures
Phase transitions
Steel
Austenite
2012
12 Downloads (Pure)

A macro scale constitutive model for TRIP steel

Geijselaers, H. J. M., Eberhardsteiner, J. (ed.), Perdahcioglu, E. S., Böhm, H. J. (ed.), Rammerstorfer, F. G. (ed.) & van den Boogaard, A. H., 10 Sep 2012, p. CD-ROM-.

Research output: Contribution to conferenceAbstractOther research output

File
26 Citations (Scopus)

A macroscopic model to simulate the mechanically induced martensitic transformation in metastable austenitic stainless steels

Perdahcioglu, E. S. & Geijselaers, H. J. M., 2012, In : Acta materialia. 60, 11, p. 4409-4419 11 p.

Research output: Contribution to journalArticleAcademicpeer-review

9 Citations (Scopus)
49 Downloads (Pure)

Dynamic substructuring and reanalysis methods in a surrogate based design optimization environment

Akcay-Perdahcioglu, D., Geijselaers, H. J. M., Ellenbroek, M. H. M. & de Boer, A., 2012, In : Structural and multidisciplinary optimization. 45, 1, p. 129-138 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

File
Substructuring
Vibration control
Vibration Control
Light weight structures
Vibration
1 Citation (Scopus)
1 Downloads (Pure)

Free surface modeling of contacting solid metal flows employing the ALE formulation

van der Stelt, A. A., Bor, T. C., Geijselaers, H. J. M., Akkerman, R. & Huetink, H., 14 Mar 2012, The 15th International ESAFORM Conference on Material Forming 2011 Proceedings. Merklein, M. & Hagenah, H. (eds.). Erlangen: Trans Tech Publications Ltd, p. 431-436

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

formulations
metals
friction stir welding
finite element method
boundary conditions
2011
1 Citation (Scopus)

A model for TRIP steel constitutive behavior

Perdahcioǧlu, E. S. & Geijselaers, H. J. M., 1 Dec 2011, In : AIP conference proceedings. 1353, p. 1500-1504 5 p.

Research output: Contribution to journalArticleAcademicpeer-review

austenite
steels
homogenizing
martensite
phase transformations