• 484 Citations
  • 14 h-Index
1990 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2019

Experimental investigation of pinching phenomena in cold rolling of thin steel sheets

Cometa, A., Geijselaers, H. J. M., Van Den Boogaard, A. H., Wentink, D. J., Hol, C. W. J., Jacobs, L. J. M. & Kampmeijer, L., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). American Institute of Physics, 040026. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

On the Choice of Basis in Proper Orthogonal Decomposition-Based Surrogate Models

de Gooijer, B. M., Hazrati Marangalou, J., Geijselaers, B. & van den Boogaard, A. H., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming: ESAFORM 2019. Galdos, L., Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Madariaga, A. & Saez de Buruaga, M. (eds.). AIP, 6 p. (AIP Conference Proceedings; vol. 2113, no. 010001).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Downloads (Pure)

Tailoring Material Scatter for Metal Forming Processes based on Inverse Robust Optimization

Nejadseyfi, O., Geijselaers, B. & van den Boogaard, A. H., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). AIP Publishing LLC, Vol. 2113. 6 p. 120005. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2018

An efficient strategy to describe the propagation of variation through multi-stage metal forming processes

De Gooijer, B. M., Hazrati-Marangalou, J., Geijselaers, H. J. M. & Van Den Boogaard, A. H., 2018, Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics. Moens, D., Desmet, W., Pluymers, B. & Rottiers, W. (eds.). Katholieke Universiteit Leuven, p. 5133-5141 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2017

Efficient Calculation of Uncertainty Propagation with an Application in Robust Optimization of Forming Processes

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. AIP Publishing LLC, 100004. (AIP Conference Proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)
2 Downloads (Pure)
2016

A multi-level set gradient based algorithm for buckling optimization of blended composite structures

Farzan Nasab, F., Geijselaers, H. J. M. & de Boer, A., 2016, 5th Aircraft Structural Design Conference. Manchester: Royal Aeronautical Society, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Interpolation of final geometry and result fields in process parameter space

Misiun, G., Wang, C., Geijselaers, H. & van den Boogaard, T., 4 Jul 2016, NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, Troyes, France, July 4-7, 2016. Saanouni, K. (ed.). EDP Sciences, 8 p. 13006. (MATEC Web of Conferences; vol. 80).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
1 Citation (Scopus)
56 Downloads (Pure)

Investigation of stress partitioning in a two-phase steel by cyclic shear tests

Perdahcioglu, E. S., Geijselaers, H. J. M. & van den Boogaard, A. H., 12 Sep 2016, Advanced Methods in Material Testing for Sheet Metal Forming. p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Parameter Study for Friction Surface Cladding of AA1050 on AA2024-T351

Liu, S., Bor, T. C., Geijselaers, H. J. M. & Akkerman, R., 17 May 2016, Proceedings of the 11th International Symposium on Friction Stir Welding. Cambridge, UK, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

File
38 Downloads (Pure)

The softened heat-affected zone in resistance spot welded tailor hardened boron steel: a material model for crash simulation

Eller, T., Greve, L., Andres, M. T., Medricky, M., Geijselaers, H. J. M., Meinders, V. T. & van den Boogaard, A. H., 22 May 2016, International Conference on Impact Loading of Structures and Materials (ICILSM). Turin, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
119 Downloads (Pure)
2015

Friction Surface Cladding of AA1050 on AA2024-T351; influence of clad layer thickness and tool rotation rate

Liu, S., Bor, T. C., Geijselaers, H. J. M. & Akkerman, R., 1 Oct 2015, 4th International conference on Scientific and Technical Advances on Friction stir Welding & Processing, FSWP 2015. San Sebastian, Spain: IK4 Lortek, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
43 Downloads (Pure)

Thermal and Flow Analysis of Friction Surface Cladding with Varying Clad Layer Thickness

Liu, S., Bor, T. C., Geijselaers, H. J. M. & Akkerman, R., 31 May 2015, International Deep Drawing Research Group 2015, IDDRG. Zhang, S-H., Chen, J. & Jing, H-M. (eds.). Shanghai, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
31 Downloads (Pure)
2014

Influence of feed rate on damage development in hot ring rolling

Wang, C., van den Boogaard, A. H., Omerspahic, E., Recina, V. & Geijselaers, H. J. M., 19 Oct 2014, 11th International conference on technology of plasticity, ICTP 2014. Ishikawa, T. & Mori, K-I. (eds.). Nagoya, Japan: Elsevier, p. 292-297 (Procedia engineering; vol. 81).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
6 Citations (Scopus)
136 Downloads (Pure)

Influence of ring growth rate on damage development in hot ring rolling

Wang, C., Geijselaers, B., Omerspahic, E., Recina, V. & van den Boogaard, T., 15 Sep 2014, 7th Forming Technology Forum: warm and hot forming. Enschede, p. 159-163

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2013

Modeling of the Austenite-Martensite Transformation in Stainless and TRIP Steels

Geijselaers, H. J. M., Hilkhuijsen, P., Bor, T. C., Perdahcioglu, E. S. & van den Boogaard, A. H., 6 Jul 2013, The 11th International Conference on Numerical Methods in Industrial Forming Processes. Zhang, S-H., Liu, X-H., Gheng, M. & Li, J. (eds.). American Institute of Physics, p. 175-182 (AIP conference proceedings; vol. 1532).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)

Multi-Stage FE Simulation of Hot Ring Rolling

Wang, C., Geijselaers, H. J. M. & van den Boogaard, A. H., 6 Jul 2013, The 11th International Conference on Numerical Methods in Industrial Forming Processes: NUMIFORM 2013. Zhang, S-H. & Liu, X-H. (eds.). AIP Publishing LLC, p. 1014-1019 (AIP conference proceedings; vol. 1532).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3 Citations (Scopus)
3 Downloads (Pure)
2012

Free surface modeling of contacting solid metal flows employing the ALE formulation

van der Stelt, A. A., Bor, T. C., Geijselaers, H. J. M., Akkerman, R. & Huetink, H., 14 Mar 2012, The 15th International ESAFORM Conference on Material Forming 2011 Proceedings. Merklein, M. & Hagenah, H. (eds.). Erlangen: Trans Tech Publications Ltd, p. 431-436

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
1 Downloads (Pure)
2011

A model for TRIP steel constitutive behaviour

Perdahcioglu, E. S. & Geijselaers, H. J. M., 2011, The 14th International Conference on Material Forming ESAFORM 2011 Proceedings. Menari, G. (ed.). Belfast: American Institute of Physics, p. 1500-1504 5 p. (AIP Conference proceedings; vol. 1353).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
17 Downloads (Pure)

Comparison of ALE finite element method and adaptive smoothed finite element method for the numerical simulation of friction stir welding

van der Stelt, A. A., Bor, T. C., Geijselaers, H. J. M., Quak, W., Akkerman, R. & Huetink, H., 27 Apr 2011, The 14th International ESAFORM Conference on Material Forming 2011 Proceedings. Menary, G. (ed.). Belfast: AIP Conference Proceedings, p. 1290-1295 (AIP Conference Proceedings; vol. 1353).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)

Constitutive modeling of multiphase materials including phase transformations

Perdahcioglu, E. S. & Geijselaers, H. J. M., 3 Jan 2011, Macro to Nano-scale Inelastic Deformation and Failure of Materials & Multiscale Modeling. Khan, A. S., Meredith, C. & Farrokh, B. (eds.). NEAT Press, p. 1-3

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
21 Downloads (Pure)

On a novel approach for optimizing composite materials panel using surrogate models

De Guido, S., Akcay-Perdahcioglu, D., Geijselaers, H. J. M. & de Boer, A., 21 Sep 2011, Proceedings of the 3rd ECCOMAS. Rolfes, R. & Jansen, E. L. (eds.). Hannover: Leibniz Universität, p. 439-446

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
18 Downloads (Pure)

Prediction of the mechanical behaviour of TRIP steel

Perdahcioglu, E. S. & Geijselaers, H. J. M., 25 Sep 2011, International Conference on the Technology of Plasticity, ICTP 2011. Tekkaya, A. E. & Hirt, G. (eds.). Aachen, p. 1-4 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
1 Citation (Scopus)
28 Downloads (Pure)
2010

A constitutive model for multi-phase steels

Perdahcioglu, E. S. & Geijselaers, H. J. M., 24 Oct 2010, Proceedings of the AMPT conference. Chastel, Y. (ed.). Paris, France: AIP, p. 3-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
1 Citation (Scopus)
74 Downloads (Pure)

Constitutive modeling of metastable austenitic stainless steel

Perdahcioglu, E. S., Geijselaers, H. J. M. & Huetink, H., 3 Jan 2010, International Symposium on Plasticity and its Current Applications. Proceedings. 03-8 january 2010 St. Kitts.. Khan, A. (ed.). St Kitts: NEAT Press, p. 130-132

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
67 Downloads (Pure)

Coupled Analysis of Material Flow and Die Deflection in Direct Aluminum Extrusion

Assaad, W. & Geijselaers, H. J. M., 24 Oct 2010, International Conference on Advances in Materials and Processing Technologies (AMPT2010). Chinesta, F., Chastel, Y. & El Mansori, M. (eds.). American Institute of Physics, p. 495-500 (AIP conference proceedings; vol. 1315, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
27 Downloads (Pure)

Influence of plastic strain on mechanically induced martensitic transformations

Perdahcioglu, E. S., Geijselaers, H. J. M. & Huétink, J., 25 Jan 2010, International Conference on Martensitic Transformations (ICOMAT). Olson, G. B., Lieberman, D. S. & Saxena, A. (eds.). Wiley, p. 614-620 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Mould filling analysis of aluminium extrusion dies

Koopman, A. J., Geijselaers, H. J. M. & Huetink, H., 13 Jun 2010, Numiform 2010 Proceedings of the 10th international conference AIP 1252. Barlat, F., Moon, Y. H. & Lee, M. G. (eds.). Pohang, Korea: American Institute of Physics, p. 290-295 (AIP Conference Proceedings; vol. 1252).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

On the coupling of reanalysis techniques with a surrogate-based design optimization method

Akcay-Perdahcioglu, D., Ellenbroek, M. H. M., Geijselaers, H. J. M. & de Boer, A., 19 Sep 2010, Proceedings ICAS 2010. Nice: ICAS, p. 1-11 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
17 Downloads (Pure)
2008

3D Numerical Simulation of Direct Aluminum Extrusion & Die Deformation

Assaad, W., Geijselaers, H. J. M. & Huetink, H., 13 May 2008, Proceedings ET '08, The conference for innovations in aluminum extrusion. Sanderson, J. (ed.). Orlando, Florida, USA: RET Foundation, p. 7pp.-

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Analysis of Thermo-Mechanical Distortions in Sliding Components: An ALE Approach

Owczarek, P. & Geijselaers, H. J. M., 22 Oct 2008, STLE/ASME 2008 International Joint Tribology Conference: Miami, Florida, USA, October 20–22, 2008. American Society of Mechanical Engineers (ASME), p. 577-579 IJTC2008-71167

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Constitutive modeling of metastable austenitic stainless steel (CD-rom)

Perdahcioglu, E. S., Geijselaers, H. J. M. & Huetink, H., 23 Apr 2008, 11th ESAFORM 2008 conference on material forming, 23-25 April 2008, Lyon, France. Boisse, P. (ed.). Lyon, France: Springer, p. - 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
23 Downloads (Pure)
2007

A stress integration algorithm for phase transforming steels

Perdahcioglu, E. S., Geijselaers, H. J. M. & Huetink, H., 2007, Complas 2007. p. - 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
18 Downloads (Pure)

A SUPG approach for determining frontlines in aluminium extrusion simulations and a comparison with experiments

Koopman, A. J., Geijselaers, H. J. M., Huetink, H., Nilsen, K. E. & Koenis, P. T. G., 18 Apr 2007, Proceedings 10th ESAFORM Conference on Material Forming, 18-20 April 2007, Zaragoza, Spain. Cueto, E. & Chinesta, F. (eds.). Zaragoza, Spain: American Institute of Physics, p. 602-607 (AIP conference proceedings; vol. 907).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)

Modelling the material behaviour of metastable stainless

Datta, K., Geijselaers, H. J. M., Post, J., Beyer, J. & Huetink, J., 2007, Materials processing and design: modeling, simulation and applications: NUMIFORM '07 : proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto, Portugal, 17-21 June, 2007. César de Sá, J. M. A. & Santos, A. D. (eds.). Melville, NY: American Institute of Physics, p. 655-660 6 p. (AIP Conference Proceedings; vol. 908, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)
11 Downloads (Pure)

Numerical forming simulations and optimisation in advanced materials

Huetink, J., van den Boogaard, A. H., Geijselaers, H. J. M. & Meinders, T., 2007, Materials processing and design: modeling, simulation and applications: NUMIFORM '07 : proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto, Portugal, 17-21 June, 2007. César de Sá, J. M. A. & Santos, A. D. (eds.). Melville, NY: American Institute of Physics, p. 281-286 (AIP Conference Proceedings; vol. 908, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

38 Downloads (Pure)
2004

Simulation of Steady Laser Hardening by an Arbitrary Lagrangian Eulerian Method

Geijselaers, H. J. M. & Huetink, J., 13 Jun 2004, Materials processing and design : modeling, simulation and applications: NUMIFORM 2004 : proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. Ghosh, S., Castro, J. M. & Lee, J. K. (eds.). Melville, NY: American Institute of Physics, p. 1514-1519 (AIP Conference Proceedings; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Thermo‐Mechanical Analysis with Phase Transformations

Geijselaers, H. J. M. & Huetink, J., 13 Jun 2004, Materials processing and design : modeling, simulation and applications: NUMIFORM 2004 : proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. Ghosh, S., Castro, J. M. & Lee, J. K. (eds.). Melville, NY: American Institute of Physics, p. 1508-1513 (AIP Conference Proceedings; vol. 712).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2003

Constitutive modelling of sandvik 1RK91

Datta, K., Datta, K., Hommes, M., Post, J., Geijselaers, H. J. M., Huetink, H. & Beyer, J., 7 Apr 2003, 7th International Conference on Computational Plasticity, COMPLAS VII. Onate, E. & Owen, D. R. J. (eds.). Barcelona: Cimne, Barcelona 2003, p. CD-rom-13 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
33 Downloads (Pure)
2002

Finite element calculation of the driving force for austenite to martensite phase change in stainless steels

Datta, K., Geijselaers, H. J. M., Huetink, H., Groen, A., Dinsdale, A. & Post, J. A., 2002, ABAQUS Benelux Users Meeting. Eindhoven, p. - 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finite element modelling of concurrent deformation and transformation in metastable steels

Datta, K., Datta, K., Post, J. A., Geijselaers, H. J. M. & Huetink, H., 28 May 2002, ABAQUS World Users Conference. New Port, RI, USA, p. - 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2001

A new displacement based [FE] formulation for steady state problems

Yu, Y., Geijselaers, H. J. M. & Huetink, J., 2001, Simulation of Materials Processing: Theory, Methods and Applications: proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes - NUMIFORM 2001, Toyohashi, Japan, 18-20 June 2001. Mori, K-I. (ed.). Lisse: A.A. Balkema, p. 121-126

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Convection by means of least squares projection for ALE calculations

Geijselaers, H. J. M. & Huetink, H., 2001, Proceedings of th 4th Esaform conference on Material Forming. Habraken, A. M. (ed.). p. 51-54

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Simulation of steady state laser hardening

Geijselaers, H. J. M. & Huetink, H., 2001, Simulation of Materials Processing: Theory, Methods and Applications. Mori, K-I. (ed.). Toyohashi, Japan, p. 397-402

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Verification Tool for 2D Multi-Stage Metal Forming Processes involving Small Parts Made of Stainless Steel

de Vries, C., Beyer, J., Geijselaers, H. J. M. & Post, J. A., 2 Apr 2001, Proceedings of the Shemet 2001. Duflou, J., Geiger, M., Kals, H. J. J., Shirvani, B. & Singh, U. P. (eds.). KU Leuven, p. 475-484

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2000

A displacement based formulation for steady state problems

Yu, Y. & Geijselaers, H. J. M., 19 Jan 2000, Third Engineering Mechanics Symposium. Rolduc, Kerkrade, Graduate School Engineering Mech, p. 68-68

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Improvements in FE-analysis of real-life sheet metal forming

Huetink, H., van den Boogaard, A. H., Geijselaers, H. J. M. & Meinders, V. T., 14 Dec 2000, European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2000, published on CD-ROM. Barcelona, Spain, p. - 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
18 Downloads (Pure)

Numerical and physical modelling in forming

Huetink, H., van den Boogaard, A. H., Geijselaers, H. J. M. & Meinders, V. T., 14 Dec 2000, Proceedings 3rd ESAFORM Conference on Material Forming. Stuttgart, Germany, p. 8-13 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
20 Downloads (Pure)

Semi implicit second order discontinuous Galerkin convection for ALE calculations

Geijselaers, H. J. M. & Huetink, H., 14 Dec 2000, European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2000, published on CD-ROM. Barcelona, Spain, p. - 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
1 Citation (Scopus)
12 Downloads (Pure)
1999

Equivalent drawbead performance in deep drawing simulations

Meinders, V. T., Geijselaers, H. J. M. & Huetink, H., 26 Jan 1999, Proceedings of Numisheet '99. p. 243-248

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1998

Hydrogen induced plastic deformation of stainless steel

Gadgil, V. J., Keim, E. G. & Geijselaers, H. J. M., 18 Jan 1998, Hydrogen in Semiconductors and Metals: symposium held april 13-17, 1998, San Francisco, California, USA. Nickel, N. H. & Jackson, W. B. (eds.). Materials Research Society, p. 299-304 6 p. (Materials Research Society symposium proceedings; vol. 513).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)