• 366 Citations
  • 12 h-Index
20032019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2017

Study of unipolar and bipolar hip prostheses using finite element simulation: Contact stress analysis

Saputra, E., Anwar, I. B., Ismail, R., Jamari, J. & Van Der Heide, E., 2017, Engineering Tribology and Materials - ICETAT 2016. Trans Tech Publications Ltd, Vol. 739 KEM. p. 96-102 7 p. (Key Engineering Materials; vol. 739).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)
2016

A numerical investigation on mechanical property improvement of styrene butadine rubber by static straight blade indentation

Setiyana, B., Ismail, R., Jamari, J. & Schipper, D. J., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. Suryana, R., Khairurrijal, Susanto, H., Markusdiantoro, Sutikno & Triyana, K. (eds.). American Institute of Physics, 020078. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
18 Downloads (Pure)

Estimation of appropriate lubricating film thickness in ceramic-on-ceramic hip prostheses

Tauviqirrahman, M., Muchammad, M., Bayuseno, A. P., Ismail, R., Saputra, E. & Jamari, J., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. Suryana, R., Khairurrijal, Susanto, H., Markusdiantoro, Sutikno & Triyana, K. (eds.). American Institute of Physics, 020090. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
11 Downloads (Pure)

Finite element analysis of the impingement on the acetabular liner rim due to wear of the acetabular liner surface

Saputra, E., Anwar, I. B., Ismail, R., Jamari, J. & Van Der Heide, E., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. American Institute of Physics, Vol. 1725. 020074. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)

Finite element study of contact pressure distribution on inner and outer liner in the bipolar hip prosthesis

Saputra, E., Anwar, I. B., Ismail, R., Jamari, J. & van der Heide, E., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. American Institute of Physics, Vol. 1725. 020075

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fixation strength analysis of cup to bone material using finite element simulation

Anwar, I. B., Saputra, E., Ismail, R., Jamari, J. & Van Der Heide, E., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. American Institute of Physics, Vol. 1725. 020006. (AIP Conference Proceedings; vol. 1725, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Influence of superoleophobic layer on the lubrication performance of partially textured bearing including cavitation

Tauviqirrahman, M., Bayuseno, A. P., Muchammad, M. & Jamari, J., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. Suryana, R., Khairurrijal, Susanto, H., Markusdiantoro, Sutikno & Triyana, K. (eds.). American Institute of Physics, 020091. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access

Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion

Jamari, J., Ismail, R., Anwar, I. B., Saputra, E., Tauviqirrahman, M. & Heide, E. V. D., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. Suryana, R., Khairurrijal, Susanto, H., Markusdiantoro, Sutikno & Triyana, K. (eds.). American Institute of Physics, 020030. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)

The beneficial effect of superhydropobic layer addition on lubrication behavior in bearing application

Muchammad, Tauviqirrahman, M., Pratomo, A. W., Jamari, J. & Schipper, D. J., 19 Apr 2016, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. Suryana, R., Khairurrijal, Susanto, H., Markusdiantoro, Sutikno & Triyana, K. (eds.). Semarang, Indonesia: American Institute of Physics, p. - 020047. (AIP Conference Proceedings; vol. 1725).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2015

A Numerical Investigation of Mechanical Behavior of Unfilled Styrene Butadiene Rubber by Static Straight Blade Indentation

Setiyana, B., Ismail, R., Jamari, J. & Schipper, D. J., 2015, Proceedings of Malaysian International Tribology Conference 2015. Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin Abdollah (eds.). Penang, Malaysia: MITC2015, p. 68-69

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

A Numerical Investigation on Mechanical Property Improvement of Styrene Butadiene Rubber by Static Straight Blade Indentation

Setiyana, B., Ismail, R., Jamari, J. & Schipper, D. J., 2015, International Conference on Advance Materials Science and Technology (ICAMST). Sutikno, S. T. (ed.). Semaring, Indonesia: Diponegoro University, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Study on the biocompatibility and wear of stainless steel 316L and UHMWPE materials

Anwar, I. B., Saputra, E., Ismail, R., Jamari, J. & van der Heide, E., 2015, Proceedings of Malaysian International Tribology Conference 2015. Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin Abdollah (eds.). Kuala Lumpur, Malaysia: Malaysian Tribology Society, p. 56-58

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The Effect of Boundary Slip and Cavitation on Hydrodynamic Pressure Generation in Pocket Bearings

Muchammad, M., Tauviqirrahman, M., Pratomo, A. W., Jamari, J. & Schipper, D. J., 2015, International Conference on Advance Materials Science and Technology (ICAMST). Sutikno, S. K. (ed.). Semarang, Indonesia, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The effect of the wear rate on impingement failure confirming the relation between impingement failure and wear of the acetabular liner surface based on finite element simulation

Saputra, E., Anwar, I. B., Ismail, R., Jamari, J. & van der Heide, E., 2015, Proceedings of Malaysian International Tribology Conference 2015. Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin Abdollah (eds.). Kuala Lumpur, Malaysia: Malaysian Tribology Society, p. 54-55

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Theoretical Investigation of Texture Depth Effect on the Lubrication Performance in Slip Pocketed Bearing Including Cavitation

Muchammad, M., Tauviqirrahman, M., Pratomo, A. W., Jamari, J. & Schipper, D. J., 2015, Proceedings of Malaysian International Tribology Conference 2015. Mariyam Jameelah Binti Ghazali & Mohd Fadzli Bin Abdollah (eds.). Kuala Lumpur, Malaysia: MYTRIBOS, p. 251-252

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2011

Comparison of the extended Reynolds equation with slip length model and two-slip model: an Investigation of load support improvement in lubricated MEMS (CD)

Tauviqirrahman, M., Ismail, R., Jamari, J. & Schipper, D. J., 3 Oct 2011, Proceeding of International Conference and Exhibition Sustainable Energy and Advanced Material. Dr. Suyitno, T. (ed.). Surakarta, Indonesia: Sebelas Maret University, p. - (issn: 2088-8864).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Effect of boundary slip on the load support in a lubricated sliding contact

Tauviqirrahman, M., Ismail, R., Jamari, J. & Schipper, D. J., 23 Sep 2011, The 4th Nanoscience and Nanotechnology Symposium (NNS2011): An International Symposium. Iskandar, F., Khairurrijal & Abdullah, M. (eds.). American Institute of Physics, p. 51-54 (AIP Conference Proceedings; vol. 1415, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Modeling of Surface Hardening Layer on Transmission Gear

Jamari, J., Ismail, R. & Tauviqirrahman, M., 3 Oct 2011, Proceeding of International Conference and Exhibition Sustainable Energy and Advanced Material. Dr. Suyitno, T. (ed.). Surakarta, Indonesia: Sebelas Maret University, p. 354-361 (issn: 2088-8864).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Optimization of partial slip surface at lubricated-MEM

Tauviqirrahman, M., Tauviqirrahman, M., Ismail, R., Ismail, R., Jamari, J. & Schipper, D. J., 15 Nov 2011, Proceeding of 2011 2nd International Conference on Instrumentation, Control and Automation. Suprijanto, D. (ed.). Bandung, Indonesia: IEEE, p. 375-379 (IEEE Catalog Number: CFP1179P-DVD).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)

Prediction of the running-in phase on rolling-sliding contact

Ismail, R., Tauviqirrahman, M., Jamari, J. & Schipper, D. J., 3 Oct 2011, Proceeding of International Conference and Exhibition Sustainable Energy and Advanced Material. Dr. Suyitno, T. (ed.). Surakarta, Indonesia: Sebelas Maret University, p. 304-311 (issn 2088-8864).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The observation of the steady state phase on rolling contact using finite element analysis

Ismail, R., Tauviqirrahman, M., Jamari & Schipper, D. J., 23 Sep 2011, The 4th Nanoscience and Nanotechnology Symposium (NNS2011): An International Symposium. Iskandar, F., Khairurrijal & Abdullah, M. (eds.). American Institute of Physics, p. 136-139 (AIP Conference Proceedings; vol. 1415, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)
2010

Alternating direction implicit method for solving modified Reynolds equation in a lubricated sliding contact

Jamari, J., Saputra, E., Ismail, R., Tauviqirrahman, M. & Schipper, D. J., 2010, Proceedings of National Seminar - Science and Technology, Faculty of Engineering, University of Wahid Hasyim, Semarang. p. 49-54

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Elastic-plastic deformation of a rough surface due to repeated rolling contact

Ismail, R., Tauviqirrahman, M., Jamari, J. & Schipper, D. J., 14 Jul 2010, 5th Kentingan Physics Forum (KPF) - The International Conference on Physics and Its Applications (ICPIA 2010), Solo, Indonesia. p. 49-52

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Study of rolling contact of a cylinder on a rough surface with finite element analysis

Ismail, R., Tauviqirrahman, M., Jamari, J. & Schipper, D. J., 2010, Proceedings of National Seminar - Science and Technology, Faculty of Engineering, University of Wahid Hasyim, Semarang. p. 68-73

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Surface Topographical Change due to Sliding Contact

Jamari, J., Saputra, E., Ismail, R., Tauviqirrahman, M. & Schipper, D. J., 2010, Proceedings of National Seminar - Science and Technology, Faculty of Engineering, University of Wahid Hasyim, Semarang. p. 43-48

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Two-dimensional finite element analysis on running-in of elastic-plastic rolling contact

Ismail, R., Tauviqirrahman, M., Jamari, J. & Schipper, D. J., 12 Oct 2010, The 4th Asian Physics Symposium. American Institute of Physic (AIP) Conference Proceedings 1325, Bandung, Indonesia. p. 190-193

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

4 Citations (Scopus)
2009

An Elastic-Plastic Running-in Analysis of Rolling Contacts: Model and Experiment

Jamari, J. & Schipper, D. J., 2009, Prosiding SNTM 4 UK-Petra. Anggono, J. & Sugondo, S. (eds.). Surabaya, Indonesia, p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

A New Model for the Contact of Rough Surfaces

Jamari, J. & Schipper, D. J., 2009, Proceedings of International Conference on Advances Mechanical Engineering. Kuntjoro, W. & Abas, S. K. (eds.). Shah Alam, Malaysia: ICAME, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finite Element Analysis of Sliding Contact of a Hard Cylinder on a Layered Elastic-Plastic Solid

Ismail, R., Tauviqirrahman, M., Jamari, J. & Schipper, D. J., 2009, Proceedings of International Conference on Advances Mechanical Engineering. Kuntjoro, W. & Abas, S. K. (eds.). Shah Alam, Malaysia: ICAME, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Finite Element Modeling of Static Contact between Ellipsoid Bodies

Ismail, R., Tauviqirrahman, M., Jamari, J. & Schipper, D. J., 2009, Proceedings of the 2nd International Conference on Green Technology. Mel, M., Muhida, R., Sutjipto, A. G. R., Singgih, M. L., Usman, M., Hadi, A. E. & Hardoyo (eds.). Lampung, Indonesie: Faculty of Engineering University of Malahayati, p. 265-269

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Frictional and Frictionless Contact Simulation of a Cylinder on a Flat Using Finite Element Method

Tauviqirrahman, M., Ismail, R., Jamari, J. & Schipper, D. J., 2009, Proceedings of International Conference on Advances Mechanical Engineering (ICAME). Kuntjoro, W. & Abas, S. K. (eds.). Shah Alam, Malaysia, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

New Material Development for Surface Layer and Surface Technology in Tribology Science to Improve Energy Efficiency

Ismail, R., Tauviqirrahman, M., Jamari, J. & Schipper, D. J., 9 Jun 2009, International Workshop on Advanced Material for New and Renewable Energy (AMNRE). Handoko, L. T. & Siregar, M. R. T. (eds.). Jakarta, Indonesia: American Institute of Physic Conference Proceedings, p. 214-211

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)

Running-in and Its Impacts on a Mechanical System

Jamari, J. & Schipper, D. J., 2009, Prosiding SNTTM VIII Universitas Diponegoro. Setiawan, J. D. & Rusnaldy (eds.). Semarang, Indonesia: Diponegoro University, p. - (paper M7-010).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Sliding Contact of Ellipsoid Bodies Using Finite Element Analysis

Tauviqirrahman, M., Ismail, R., Jamari, J. & Schipper, D. J., 2009, Proceedings of the 2nd International Conference on Green Technology. Mel, M., Muhida, R., Sutjipto, A. G. R., Singgih, M. L., Usman, M., Hadi, A. E. & Hardoyo (eds.). Lampung, Indonesie: Faculty of Engineering Malahayati University, p. 259-263

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The Finite Element Study of Static Contact on Multilayered Solids

Ismail, R., Tauviqirrahman, M., Jamari, J. & Schipper, D. J., 2009, The 6th International Conference on Numerical Analysis in Engineering. Syam, B. (ed.). Lombok Island Nusa Tenggara Barat, Indonesia: Universitas Sumatera Utara, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

2008

Contact mechanics based running-in model

Jamari, J., 2008, Proceedings SNTM3 UK-Petra. Devwanto, J. & Anggono, W. (eds.). Surabaya, Indonesia: Department of Mechanical Engineering Publisher, Christian University Petra, p. 476-481

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Controlled running-in for reliable mechanical systems

Jamari, J., Setiawan, J. D., Safaruddin, M. A. & Schipper, D. J., 2008, Proceedings of the International Conference on Mechanical and Manufacturing Engineering. Wagiman, A., Alimin, A. J., Ismail, A. E. & Sebayang, D. (eds.). Johor, Malaysia: Pejabat Penerbit , UTHM, p. 1-5 (Paper no. MEID 0182).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)

Finite element study of stresses due to sliding contact of a cylinder on a flat surface

Ismail, R., Tauviqirrahman, M., Jamari, J., Kiono, B. F. T. & Schipper, D. J., 2008, Proceedings SNTM2 UT-Petra. Dewanto, J. & Anggono, W. (eds.). Surabaya, Indonesia: Cristian University Petra, p. 488-492

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

The effect of firction coefficient on stresses in sliding contact using finite element method

Tauviqirrahman, M., Ismail, R., Jamari, J., Kiono, B. F. T. & Schipper, D. J., 2008, Proceedings SNTM3 UK-Petra. Surabaya, Indosesia, p. 493-497

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review