Find Research outputs

Search results

• 3D float tracking : in situ floodplain roughness estimation

  Straatsma, M., 2009, In: Hydrological processes. 23, 2, p. 201-212

  Research output: Contribution to journal › Article › Academic › peer-review
  8 Citations (Scopus)

• 3D force sensor for biomechanical applications

  Brookhuis, R. A., Lammerink, T. S. J., Wiegerink, R. J., de Boer, M. J. & Elwenspoek, M. C., 8 May 2012, In: Sensors and actuators. A: Physical. 182, 182, p. 28-33 6 p.

  Research output: Contribution to journal › Article › Academic › peer-review
  26 Citations (Scopus)

  1 Downloads (Pure)

• 3D-fractal engineering based on oxide-only corner lithography

  Berenschot, J. W., Tiggelaar, R. M., Geerlings, J., Gardeniers, J. G. E., Tas, N. R., Malankowska, M., Pina, M. P. & Mallada, R., 30 May 2016, 2016 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP). IEEE, 4 p. (Category numberCFP16DTI-ART; Code 122735).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
  2 Citations (Scopus)

  4 Downloads (Pure)

• 3-D Full-Wave High Frequency Common Mode Choke Modeling

  Moonen, N., Vogt-Ardatjew, R., Roc'h, A. & Leferink, F., 1 Jun 2020, In: IEEE transactions on electromagnetic compatibility. 62, 3, p. 707-714 8 p., 8721537.

  Research output: Contribution to journal › Article › Academic › peer-review
  1 Citation (Scopus)

  6 Downloads (Pure)

• 3D-GEM : Geo-technical extension towards an integrated 3D information model for infrastructural development

  Tegtmeier, W., Zlatanova, S., van Oosterom, P. J. M. & Hack, H. R. G. K., 2014, In: Computers & geosciences. 64, p. 126-135

  Research output: Contribution to journal › Article › Academic › peer-review
  23 Citations (Scopus)

• 3D geologic modelling in mining

  Sides, E. J., 1994, In: ITC journal. 1, p. 67-68

  Research output: Contribution to journal › Article › Academic › peer-review

• 3D geometry analysis of the medial meniscus - a statistical shape modeling approach

  Vrancken, A. C. T., Crijns, S. P. M., Ploegmakers, M. J. M., O'Kane, C., van Tienen, T. G., Janssen, D., Buma, P. & Verdonschot, N. J. J., 2014, In: Journal of anatomy. 225, 4, p. 395-402 8 p.

  Research output: Contribution to journal › Article › Academic › peer-review
  13 Citations (Scopus)

• 3D GIS and the evaluation of historical urban areas : a case study of conservation and revitialisation in Istanbul.

  Navarra, D. D., Sliuzas, R. V. & van Maarseveen, M. F. A. M., 2011, Electronic Government and Electronic Participation : Joint Proceedings of Ongoing Research and Projects of IFIP EGOV and ePart 2011. Janssen, M. (ed.). Linz: Trauner, p. 481-494

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3D GIS for urban development

  Zlatanova, S., 2000, Enschede: International Institute for Geo-Information Science and Earth Observation.

  Research output: Thesis › PhD Thesis - Research external, graduation external

• 3D - GSIS geotechnical modelling of tunnel intersection in soft ground : the second Heinenoord tunnel, Netherlands

  Elkadi, A. S. & Huisman, M., 2002, In: Tunnelling and underground space technology. 17, 4, p. 363-369

  Research output: Contribution to journal › Article › Academic › peer-review
  19 Citations (Scopus)

• 3D Hierarchical Particle Assemblies with Nanostructure-Enabled Functionalities

  Wang, J., 6 Mar 2020, Enschede: University of Twente. 222 p.

  Research output: Thesis › PhD Thesis - Research UT, graduation UT

  Open Access

  File
  102 Downloads (Pure)

• 3 Dimensional data research for property valuation in the context of the LADM Valuation Information Model

  Kara, A., van Oosterom, P. J. M., Çağdaş, V., Işikdağ, Ü. & Lemmen, C. H. J., Nov 2020, In: Land use policy. 98, 104179.

  Research output: Contribution to journal › Article › Academic › peer-review
  10 Citations (Scopus)

• 3-Dimensional finite difference beam propagation method

  Wijnands, F. H. G. M., Hoekstra, H. & de Ridder, R. M., 30 Jun 1994, p. -.

  Research output: Contribution to conference › Poster › Other research output

• 3-Dimensional simulation of electro-thermal effects in bipolar transistors using a circuit simulator

  Krabbenborg, B. H., Bosma, A., de Graaff, H. C. & Mouthaan, A. J., 17 Nov 1992, p. -.

  Research output: Contribution to conference › Poster › Other research output

• 3D information extraction from laser point clouds covering complex road junctions

  Oude Elberink, S. J. & Vosselman, G., 2009, In: Photogrammetric record. 24, 125, p. 23-36 14 p.

  Research output: Contribution to journal › Article › Academic › peer-review
  31 Citations (Scopus)

  1 Downloads (Pure)

• 3-D inviscid transonic condensing flow around a swept wing

  Goodheart, K. A. & Schnerr, G., 2003, In: Proceedings in Applied Mathematics and Mechanics. 2, 1, p. 374-375 2 p.

  Research output: Contribution to journal › Article › Academic › peer-review

• 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions

  Rodrigues, J., Heinrich, M. A., Teixeira, L. M. & Prakash, J., 1 Mar 2021, In: Trends in cancer. 7, 3, p. 249-264 16 p.

  Research output: Contribution to journal › Review article › Academic › peer-review

  Open Access

  File
  21 Citations (Scopus)

  19 Downloads (Pure)

• 3D kadaster en volumepercelen : ruimtelijke verdeling van vastgoed

  Ploeger, H. D. & Stoter, J. E., 2005

  Research output: Other contribution › Other research output

• 3D Land Administration: A review and a future vision in the context of the spatial development lifecycle

  Kalogianni, E., van Oosterom, P. J. M., Dimopoulou, E. & Lemmen, C. H. J., 13 Feb 2020, In: ISPRS international journal of geo-information. 9, 2, p. 1-27 27 p., 107.

  Research output: Contribution to journal › Article › Academic › peer-review

  Open Access

  File
  14 Citations (Scopus)

  21 Downloads (Pure)

• 3D Land Administration for 3D Land Uses

  van Oosterom, P. J. M., Bennett, R., Koeva, M. N. & Lemmen, C. H. J., Nov 2020, In: Land use policy. 98, p. 1-3 3 p., 104665.

  Research output: Contribution to journal › Article › Academic › peer-review

  Open Access

  File
  4 Citations (Scopus)

  92 Downloads (Pure)

• 3D leaf water content mapping using terrestrial laser scanner backscatter intensity with radiometric correction

  Zhu, X., Wang, T., Darvishzadeh, R., Skidmore, A. K. & Niemann, K. O., 2015, In: ISPRS journal of photogrammetry and remote sensing. 110, p. 14-23

  Research output: Contribution to journal › Article › Academic › peer-review
  47 Citations (Scopus)

• 3D line reconstruction from airborne three-line scanner data

  Oude Elberink, S. J. & Vosselman, G., 1 Jan 2002, 2002 International Symposium of ISPRS Commission III on Photogrammetric Computer Vision, PCV 2002. Graz: International Society for Photogrammetry and Remote Sensing (ISPRS), Vol. 34. 6 p. (International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  1 Citation (Scopus)

• 3D-map of the motor end-plate regions in the rat gastrocnemic muscle as an aid for localized application of retrograde tracers

  Prodanov, D. P., Thil, M. A., Holsheimer, J., Delbeke, J., Ypey, D. L. & Marani, E., 27 Oct 2003, Proceedings of the 10th Dutch Annual Conference on BioMedical Engineering, Papendal. Pontenagel, W. M. G. F. & Feijen, J. (eds.). Enschede: University of Twente, Research school IBME, p. 138-141 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3D mesh refinement procedure using the bisection and rivara algorithms with mesh quality assessment

  Selman, A., Merrouche, A. & Knopf-Lenoir, C., 2001, In: Revue Europeenne des Elements Finis.

  Research output: Contribution to journal › Article › Academic

  File
  51 Downloads (Pure)

• 3D microenvironment as essential element for osteoinduction by biomaterials

  Habibovic, P., Yuan, H., van der Valk, C. M., Meijer, G., van Blitterswijk, C. & de Groot, K., 2005, In: Biomaterials. 26, 17, p. 3565-3575

  Research output: Contribution to journal › Article › Academic › peer-review
  458 Citations (Scopus)

• 3D-model for the simulaton of walking with functional electrical stimulation and orthoses

  van de Belt, D., Koopman, H. F. J. M. & Grootenboer, H. J., 4 Jul 1993, Proceedings of the XIVth ISB congress. Paris, France, p. 1378-1379

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3D modeling aspects of soft ground for tunneling with TBM

  Ozmutlu, S., Hack, H. R. G. K., de Rooij, C. & van der Putten, R., 1998, GOCAD ENSG Conference : 3D modeling of natural objects : a challenge for the 2000's, 4-5 June 1998. 10 p.. ETH Zurich, 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3D modeling for coal geological resources information system for Tangkou coal mine, China

  Yongjie, T., Sides, E. J. & van Genderen, J. L., 1996, JEC'96 : 2nd joint European conf. & Exhibition on Geographical Information, Barcelona, Spain 1996. pp. 477-481. Barcelona, Spain, p. 477-481

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3D modeling of building indoor spaces and closed doors from imagery and point clouds

  Díaz-Vilariño, L., Khoshelham, K., Martínez-Sánchez, J. & Arias, P. L., 2015, In: Sensors (Switzerland). 15, 2, p. 3491-3512

  Research output: Contribution to journal › Article › Academic › peer-review
  72 Citations (Scopus)

• 3D-Modeling of the 4GLS high-gain VUV FEL oscillator

  van der Slot, P. J. M., Karssenberg, J. G. & Boller, K. J., 23 Jan 2007, p. -.

  Research output: Contribution to conference › Poster › Other research output

• 3D modellering tweede Heinenoordtunnel : werkrapport : visualisatie van driedimensionale datasets met behulp van driedimensionale geografische informatie systemen

  Hack, H. R. G. K. & ... [et al.], 2000, Gouda: Centrum Ondergronds Bouwen (CUB), Land Water Milieu Informatietechnologie (LWI) en Centrum Uitvoering Research en Regelgeving (CUR).

  Research output: Book/Report › Book › Academic

• 3D modelling and interactive web-based visualization of cultural heritage objects

  Koeva, M. N., 12 Jul 2016, Proceedings of the XXIII ISPRS Congress : From human history to the future with spatial information : Commission V, WG V/2, 12-19 July 2016, Prague, Czech Republic. Halounova, L. (ed.). Prague: International Society for Photogrammetry and Remote Sensing (ISPRS), p. 297-303

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access
  7 Citations (Scopus)

• 3D Modelling for Property Valuation in China: A High-resolution Remote Sensing-based Approach

  Ying, Y., Koeva, M. N., Kuffer, M. & Asiama, K. O., 26 Sep 2019, In: GIM International. 3 p.

  Research output: Contribution to journal › Article › Professional

  Open Access

  File
  34 Downloads (Pure)

• 3D Modelling of interior spaces : learning the language of indoor architecture

  Khoshelham, K. & Diaz-Vilarino, L., 23 Jun 2014, Proceedings of ISPRS Technical Commission V Symposium, 23-25 June 2014, Riva del Garda, Italy. Remondino, F. & Menna, F. (eds.). International Society for Photogrammetry and Remote Sensing, p. 321-326

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

  Open Access
  62 Citations (Scopus)

• 3D modelling of sheet metal shearing

  Wisselink, H. H. & Huetink, H., 17 Mar 1998, First ESAFORM conference on Material Forming. Sophia Antipolis, France, p. 243-246

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3-D modelling of sheet metal shearing

  Wisselink, H. H. & Huetink, H., 1998. 4 p.

  Research output: Contribution to conference › Paper

  File
  29 Downloads (Pure)

• 3D modelling of topographic objects by fusing 2D maps and LIDAR data

  Oude Elberink, S. J., 2006, Proceedings geo-innovatie 2006 : 4e symposium, 15 november 2006, Ede, Nederland. Amersfoort : Ruimte voor Geo - Informatie (RGI), 2006. pp. 38-41. Ruimte voor Geo-Informatie (RGI)

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3D modelling of topographic objects by fusing 2D maps and LIDAR data

  Oude Elberink, S. J. & Vosselman, G., 2006, ISPRS 2006 : Proceedings of the ISPRS TC-IV International symposium on : Geospatial databases for sustainable development, September 27-30, 2006, Goa, India.. Goa: International Society for Photogrammetry and Remote Sensing (ISPRS), p. 199-204 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access

• 3D modelling system for ground engineering

  Ozmutlu, S. & Hack, H. R. G. K., 2003, Subsurface conditions : characterization of the shallow subsurface implications for urban infrastructure and environmental assessment (Lecture Notes in Earth Sciences ; 99). Rosenbaum, M. S. & Turner, A. K. (eds.). Springer, p. 253-260

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
  1 Downloads (Pure)

• 3D model of liver cancer in vitro as a tool to evaluate nanomedicines

  Ortiz Perez, A., Blondé, J-B. G. M., Bansal, R. & le Gac, S., 2019.

  Research output: Contribution to conference › Paper › peer-review

• 3D motion analysis applying intertial sensing

  Roetenberg, D., 2005, 5th International Conference on Methods and Techniques in Behavioral Research, Measuring Behavior 2005. Measuring Bahavior 2005 (ed.). Wageningen, The Netherlands: Noldus Information Technology bv, p. - 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

  File
  19 Downloads (Pure)

• 3D motion analysis applying intertial sensing

  Roetenberg, D., 30 Aug 2005, p. -.

  Research output: Contribution to conference › Poster › Other research output

• 3D movement analysis using accelerometry - Theoretical concepts

  Veltink, P. H. & Boom, H. B. K., 1996, Neuroprosthetics from Basic Research to Clinical Applications. Germany: Springer, p. 317-325

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic

• 3D movement analysis using accelerometry - Theoretical concepts

  Veltink, P. H. & Boom, H. B. K., 20 Nov 1995, Topical workshop of the concerted action RAFT. Enschede 16-18 december 1994, p. 45-50

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3-D multibody modeling of a flexible surgical instrument inside an endoscope

  Khatait, J. P., Brouwer, D. M., Meijaard, J. P., Aarts, R. G. K. M. & Herder, J. L., 9 Nov 2012, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition: Volume 2: Biomedical and Biotechnology. American Society of Mechanical Engineers (ASME), p. 271-280

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
  1 Citation (Scopus)

  20 Downloads (Pure)

• 3D multi-energy deconvolution electron microscopy

  De Goede, M., Johlin, E., Sciacca, B., Boughorbel, F. & Garnett, E. C., 14 Jan 2017, In: Nanoscale. 9, 2, p. 684-689 6 p.

  Research output: Contribution to journal › Article › Academic › peer-review
  10 Citations (Scopus)

  3 Downloads (Pure)

• 3-D mutual localization with anonymous bearing measurements

  Cognetti, M., Stegagno, P., Franchi, A., Oriolo, G. & Bülthoff, H. H., 2012, 2012 IEEE International Conference on Robotics and Automation, ICRA 2012. Piscataway, NJ: IEEE, p. 791-798 8 p. 6225288. (Proceedings - IEEE International Conference on Robotics and Automation (ICRA); vol. 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
  17 Citations (Scopus)

• 3D Nanofabrication of components by repeated corner lithography: Self Aligned sub-50nm apertures

  Burouni, N., Berenschot, J. W., Elwenspoek, M. C. & Tas, N. R., 20 Aug 2012, Proceedings of the 12th IEEE International Conference on Nanotechnology (IEEE- NANO). Hoes Lane, USA: IEEE, p. - 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  File
  38 Downloads (Pure)

• 3D Nanofabrication of fluidic components by corner lithography

  Burouni, N., 12 Nov 2014, Enschede: Ipskamp Printing. 118 p.

  Research output: Thesis › PhD Thesis - Research UT, graduation UT

  File
  250 Downloads (Pure)

• 3D Nanofabrication of Fluidic Components by Corner Lithography

  Berenschot, J. W., Burouni, N., Schurink, B., van Honschoten, J. W., Sanders, R. G. P., Truckenmüller, R. K., Jansen, H. V., Elwenspoek, M. C., van Apeldoorn, A. A. & Tas, N. R., 21 Dec 2012, In: Small. 8, 24, p. 3823-3831 9 p.

  Research output: Contribution to journal › Article › Academic › peer-review

  File
  29 Citations (Scopus)

  65 Downloads (Pure)