Find Research outputs

Search results

• Design of an experimental setup to measure tool-ply and ply-ply friction in thermoplastic laminates

  ten Thije, R. H. W. & Akkerman, R., 2009, In: International journal of material forming. 2, 1, p. 197-200

  Research output: Contribution to journal › Article › Academic › peer-review
  27 Citations (Scopus)

• Design of an Experimental Set-Up to Study the Behavior of a Flexible Surgical Instrument Inside an Endoscope

  Khatait, J., Brouwer, D. M., Soemers, H. M. J. R., Aarts, R. G. K. M. & Herder, J. L., 2013, In: Journal of Medical Devices. 7, 3, p. 031004-031015 12 p., 031004.

  Research output: Contribution to journal › Article › Academic › peer-review
  4 Citations (Scopus)

  2 Downloads (Pure)

• Design of an indoor mapping system using three 2D laser scanners and 6 DOF SLAM

  Vosselman, G., 2014, Annals of the Photogrammetry, Remote Sensing and Spatial Information Science, peer reviewed annals Vol. II-3, 2013, ISPRS technical Commission III, Symposium, 5-7 september, 2014, Zurich, Switserland.: open access. Schindler, K. & Paparoditis, N. (eds.). Zurich: International Society for Photogrammetry and Remote Sensing (ISPRS), p. 173-179 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review

  Open Access

• Design of an industrial process for the production of aniline by direct amination

  Driessen, R. T., Kamphuis, P., Mathijssen, L., Zhang, R., Van Der Ham, A. G. J., van den Berg, H. & Zeeuw, A. J., 1 Jan 2016, 22nd International Congress of Chemical and Process Engineering, CHISA 2016 and 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2016. Czech Society of Chemical Engineering, p. 831-832 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• Design of an in-ear active noise cancelling device based on an array structure

  Pel, D. H., 23 Jul 2021, Enschede: University of Twente. 150 p.

  Research output: Thesis › EngD Thesis › Academic

• Design of an Infrastructural IP Dependability Manager for a Dependable Reconfigurable Many-Core Processor

  Kerkhoff, H. G. & Zhang, X., 13 Jan 2010, Fifth IEEE International Symposium on Electronic Design, Test & Applications, DELTA 2010. Los Alamitos, CA: IEEE, p. 270-275 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access

  File
  13 Citations (Scopus)

  126 Downloads (Pure)

• Design of an inspection robot for small diameter gas distribution mains

  Dertien, E. C., 3 Jul 2014, Enschede: University of Twente. 221 p.

  Research output: Thesis › PhD Thesis - Research UT, graduation UT

  Open Access

  File
  3643 Downloads (Pure)

• Design of an Integrated Optical Electro-Optical Modulator based on PZT containing Multilayer-stacks

  Hoekman, M., 2001, Enschede: Integrated Optical MicroSystems (IOMS).

  Research output: Book/Report › Report › Professional

• Design of an integrated optic diabatic TE/TM mode splitter

  Sander, A. F. M., de Ridder, R. M., Driessen, A., Krijnen, G. J. M. & Fluitman, J. H. J., 28 Nov 1990, Veldhoven: IOP-IC-T.

  Research output: Book/Report › Report › Professional

• Design of an integrated photo detector circuit for laser doppler blood flow monitoring

  Nieland, J., van Kranenburg, H., Wallinga, H., Serov, A., de Mul, F. F. M. & Steenbergen, W., 26 Nov 1998, 9th Annual ProRISC/IEEE Workshop on Circuits, Systems and Signal Processing. Utrecht: STW, p. 421-426 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• Design of an integrated photo detector circuit for laser doppler blood flow monitoring

  Nieland, J., van Kranenburg, H., Wallinga, H., Serov, A., Steenbergen, W. & de Mul, F. F. M., 21 Sep 1999, ESSCIRC '99: proceedings of the 25th European Solid-State Circuits Conference, Duisburg, Germany, 21-23 September, 1999. Piscataway, NJ, USA: IEEE, p. 262-265 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
  1 Citation (Scopus)

• Design of an integrated photo detector for a laser Doppler blood flow monitor

  Kimmels, A., 1995, Enschede: Semiconductor Components (SC). 98 p.

  Research output: Book/Report › Report › Professional

• Design of an intention detection system for FES assisted mobility in paraplegics

  Veltink, P. H., Baardman, G., Hermens, H. J., Sweeney, P. C., van Riel, W. J. B. M. & de Vries, J., 17 Aug 1995, 5th Vienna International Workshop on Functional Electrostimulation. Vienna, Austria, p. 43-46

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• Design of an intention detection system for FES assisted mobility in paraplegics

  Veltink, P. H., de Vries, W., Hermens, H. J. & Baardman, G., 24 Jan 1996

  Research output: Other contribution › Other research output

• Design of an interactive playground based on traditional children's play

  Tetteroo, D., Reidsma, D., van Dijk, E. M. A. G. & Nijholt, A., Sep 2012, Proceedings of the 4th International ICTS Conference on Intelligent Technologies for Interactive Entertainment (INTETAIN 2011), Revised Selected Papers. Camurri, A., Costa, C. & Volpe, G. (eds.). Berlin: Springer, p. 129-138 10 p. (Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering; vol. 78).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  File
  11 Citations (Scopus)

  508 Downloads (Pure)

• Design of an intramedullary leg lengthening device with a shape memory actuator

  Aalsma, A. M. M., Hekman, E. E. G., Stapert, J. & Grootenboer, H. J., 1999, In: Technology and health care. 7, 6, p. 461-467

  Research output: Contribution to journal › Article › Academic › peer-review

• Design of an intramedullary leg lengthening device with a shape memory actuator

  Aalsma, A. M. M., Hekman, E. E. G., Stapert, J. W. J. L. & Grootenboer, H. J., 19 Apr 1999, Proceedings of the international biomechatronics workshop. Enschede, p. 184-192

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  2 Citations (Scopus)

• Design of an on-chip optical isolator based on surface acoustic waves

  Mak, J., Garcia Porcel, M. A., van der Slot, P. J. M. & Boller, K. J., 23 Jan 2018.

  Research output: Contribution to conference › Poster › Other research output

• Design of an on-chip reflectance map

  Terwisscha van Scheltinga, J., Smit, J. & Bosma, M., 28 Aug 1995, 10th Eurographics Workshop on Graphics Hardware: MECC, Maastricht August 28-29, 1995. Straßer, W. (ed.). Maastricht, the Netherlands: Eurographics Association, p. 51-55 5 p. (Eurographics workshop proceedings series; no. EG 95 HW).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access

  File
  16 Citations (Scopus)

  84 Downloads (Pure)

• Design of an online charging system to support IMS-based inter-domain composite services

  Le, V. M., Huitema, G. B., Rumph, F. J., Nieuwenhuis, L. J. M. & van Beijnum, B. J. F., 2009, Lecture Notes In Computer Science (including Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics).. Pfeifer, T. & Bellavista, P. (eds.). London: Springer, p. 1-14 14 p. (Lecture Notes in Computer Science; vol. 5842).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
  4 Citations (Scopus)

• Design of an Optical Parametric Oscillator in behalf of a surface sum-vibration spectrometer

  Tukker, T. W., Otto, C. & Greve, J., 17 Nov 1994. 1 p.

  Research output: Contribution to conference › Poster › Other research output

• Design of an optical parametric oscillator on behalf of a Sum-frequency-vibration spectrometer

  Tukker, T. W., Otto, C. & Greve, J., 23 Sep 1996, Jena, Duitsland

  Research output: Other contribution › Other research output

• Design of an optical system for high power CO2 Laser Cutting

  de Lange, D. F., Meijer, J. & Nielsen, J. S., 13 Oct 2003, Proceedings of the ICALEO'03 Laser Materials Processing Section C (cd-rom). Jacksonville (FL), USA: LIA, p. 178-184 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• Design of a novel, hybrid decentralized, distributed, modular architecture for manufacturing systems

  Essers, M. S., 20 Apr 2016, Enschede: Universiteit Twente. 209 p.

  Research output: Thesis › PhD Thesis - Research UT, graduation UT

  Open Access

  File
  637 Downloads (Pure)

• Design of a Novel 3-DoF Leg with Series and Parallel Compliant Actuation for Energy Efficient Articulated Robots

  Roozing, W., Ren, Z. & Tsagarakis, N. G., 10 Sep 2018, 2018 IEEE International Conference on Robotics and Automation, ICRA 2018. IEEE, p. 6068-6075 8 p. 8460493

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
  13 Citations (Scopus)

• Design of a novel autothermal membrane-assisted fluidized-bed reactor for the production of ultrapure hydrogen from methane

  Patil, C. S., van Sint Annaland, M. & Kuipers, J. A. M., 2005, In: Industrial & engineering chemistry research. 44, 12, p. 9502-9512 10 p.

  Research output: Contribution to journal › Article › Academic › peer-review
  47 Citations (Scopus)

• Design of a novel auto-thermal membrane assisted fluidized bed reactor for the production of ultra pure hydrogen from methane

  Patil, C. S., van Sint Annaland, M. & Kuipers, J. A. M., 15 Jun 2005, Proceedings of the 5th International Symposium on Catalysis in Multiphase Reactors and the International Symposium on Multifunctional Reactors. Portoroz, p. -

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• Design of an SDH-testbed for telecommunications network management application

  Lindeijer, A. F., 1995, Enschede: Tele-informatica en Open Systemen (Informatica). 46 p.

  Research output: Book/Report › Report › Professional

• Design of anti - slide piles for slope stabilization in Wanzhou city, Three Gorges Area, China : abstract

  Zhou, C. & van Westen, C. J., 2013, p. 1-.

  Research output: Contribution to conference › Abstract › Other research output

• Design of an ultra-Thin, radiation thickness minimized, metallic cryostat for a 2T/4m free bore detector solenoid

  Silva, H. F. P., Ilardi, V., Kulenkampff, T., Dudarev, A. & Ten Kate, H. H. J., 3 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 502, 1, 012084.

  Research output: Contribution to journal › Conference article › Academic › peer-review

  Open Access

  File
  2 Citations (Scopus)

  43 Downloads (Pure)

• Design of an unbounded ethnography of spatial information infrastructure development

  Richter, C., Miscione, G., Pfeffer, K. & Georgiadou, P. Y., 2009, Proceedings of the GSDI 11 World Conference : Spatial data infrastructure convergence : building SDI bridges to address global challenges, June 15-19, 2009, Rotterdam, The Netherlands. 22 p.. Rotterdam, The Netherlands: Global Spatial Data Infrastructure, 22 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• Design of a of a survivable multi-wavelength photonic access network

  Roy, R. & van Etten, W., 23 Aug 2007, p. 1-6. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Design of a paint simulation and visualization tool for automotive surfaces

  Luo, Y., 12 Jul 2017, Enschede: University of Twente. 86 p.

  Research output: Thesis › EngD Thesis › Academic

  Open Access

  File
  680 Downloads (Pure)

• Design of a Parallel VLSI Engine for Real-Time Visualization of 3D Medical Images

  Bentum, M. J. & Smit, J., 1 Feb 1994, Proceedings of SPIE Medical Imaging 1994: Image Capture, Formating and Display, Volume 2164. Newport Beach, California, USA, p. 370-381

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• Design of a passive exoskeleton with artificial tendons.

  van Dijk, W., van der Kooij, H. & Hekman, E. E. G., 20 Jan 2011, p. 83-83.

  Research output: Contribution to conference › Paper

• Design of a patient specific, 3D printed arm cast

  Fitzpatrick, A. P., Mohammed, M., Collins, P. & Gibson, I., 2017, DesTech 2016: Proceedings of the International Conference on Design and Technology. KnowledgeE, p. 135-142 8 p. (KnE Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review

  Open Access

• Design of a perfect balance system for active upper-extremity exoskeletons

  Smith, R. L., Lobo Prat, J., van der Kooij, H. & Stienen, A. H. A., 24 Jun 2013, 2013 IEEE 13th International Conference on Rehabilitation Robotics (ICORR): Seattle, WA, USA, 24-26 June 2013. Piscataway, NJ: IEEE, p. 1-6 6650470. (IEEE International Conference on Rehabilitation Robotics (ICORR); vol. 13).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
  12 Citations (Scopus)

• Design of a Permeability Measuring Tool

  Loendersloot, R., 2002, Enschede: University of Twente. 27 p.

  Research output: Book/Report › Report › Professional

• Design of a photo-acoustic detector to monitor the blood content in tissue

  Kolkman, R. G. M., de Mul, F. F. M. & Greve, J., 10 Nov 1999, Proceedings of the Dutch Annual Conference on BioMedical Engineering. Papendal, p. 64-65 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• Design of a piezoelectric rotation actuator

  Holterman, J., de Vries, T. J. A., Babakhani, B. & Brouwer, D. M., 27 Jun 2012, p. 92-92. 1 p.

  Research output: Contribution to conference › Abstract › Academic

  Open Access

  File
  342 Downloads (Pure)

• Design of a pilot scale directly irradiated, high temperature, and low pressure moving particle cavity chamber for metal oxide reduction

  Singh, A., Lapp, J., Grobbel, J., Brendelberger, S., Reinhold, J. P., Olivera, L., Ermanoski, I., Siegel, N. P., McDaniel, A., Roeb, M. & Sattler, C., 15 Nov 2017, In: Solar energy. 157, p. 365-376 12 p.

  Research output: Contribution to journal › Article › Academic › peer-review
  19 Citations (Scopus)

• Design of a Planar Eleven Antenna for Optimal MIMO Performance as a Wideband Micro Base-station Antenna

  Razavi, A., Yu, W., Yang, J. & Alayón Glazunov, A., 16 Apr 2018, Ithaca, NY: ArXiv.org, 7 p.

  Research output: Working paper

  Open Access

  File
  12 Downloads (Pure)

• Design of a PLC Control Program for a Batch Plant

  Mader, A. H., Brinksma, H., Wupper, H. & Bauer, N., 2001, In: European journal of control. 7, 4, p. 416-439 23 p.

  Research output: Contribution to journal › Article › Academic

• Design of a PLC Control Program for a Batch Plant, VHS Case Study 1

  Brinksma, H., Mader, A. H., Wupper, H. & Bauer, N., 2001, In: European journal of control. 7, 4, p. - 439 p.

  Research output: Contribution to journal › Article › Academic › peer-review

• Design of a PLC Control Program for a Batch Plant - VHS Case Study 1

  Mader, A. H., Brinksma, H., Wupper, H. & Bauer, N., 2001, In: European journal of control. 7, 4, p. 416-439 24 p., 10.3166/ejc.7.416-439.

  Research output: Contribution to journal › Article › Academic › peer-review

  File
  4 Citations (Scopus)

  193 Downloads (Pure)

• Design of a process for supercritical water desalination with zero liquid discharge

  Odu, S. O., van der Ham, A. G. J., Metz, S. & Kersten, S. R. A., 2015, In: Industrial & engineering chemistry research. 54, 20, p. 5527-5535 9 p.

  Research output: Contribution to journal › Article › Academic › peer-review

  File
  40 Citations (Scopus)

  295 Downloads (Pure)

• Design of a programmable wide-band Integrated Continuous-Time base-band filter

  Pantaleoni, R., 2002, Enschede: Integrated Circuit Design (ICD).

  Research output: Book/Report › Report › Professional

• Design of a Project-based Study Environment on the World Wide Web

  Grooters, F. M. & de Vries, S. A., 25 Mar 1998, EDMEDIA'98. Freiburg, p. 493-498

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• Design of a proof-of-concept demonstrator for an array-based in-ear active noise control device

  Hekman, T., 23 Jul 2021, Enschede: University of Twente. 232 p.

  Research output: Thesis › EngD Thesis › Academic

• Design of a prosthetic knee for functional and stable flextion during the push-off phase

  Hendriks, P. J. H., Grootenboer, H. J., de Vries, J., Koopman, H. F. J. M. & van Wezel, L. J. M., 2 Apr 1995, Proceedings 8th World Congress International Society for Prosthetics and Orthotics. Melbourne, Australie, p. 41-41

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review