Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Antonius H. van den Boogaard
2020
Open Access
File
7 Downloads (Pure)
2019

A Multi-scale Friction Model for Hot Stamping

Venema, J., Hazrati, J., Matthews, D., Atzema, E. & van den Boogaard, T., 2019, Hot Sheet Metal Forming of High-Performance Steel CHS2: 7th International Conference, June 2-5, 2019, Luleå, Sweden: proceedings. Oldenburg, M., Hardell, J. & Casellas, D. (eds.). Auerbach: Verlag Wissenschaftliche Scripten, p. 629-636

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

A noninvasive MRI based approach to estimate the mechanical properties of human knee ligaments

Naghibi, H., Mazzoli, V., Gijsbertse, K., Hannink, G., Sprengers, A., Janssen, D., van den Boogaard, T. & Verdonschot, N., May 2019, In : Journal of the mechanical behavior of biomedical materials. 93, p. 43-51 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

1 Citation (Scopus)

Bayesian Model-based State Estimation for Mass Production Metal Forming

Havinga, J., Mandal, P. K. & van den Boogaard, A. H., 2019, 38th International Deep Drawing Research Group Conference. 1 ed. IOP Science, p. 1-8 8 p. 012095. (IOP Conference Series: Materials Science and Engineering; vol. 651, no. 012095).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
8 Downloads (Pure)

Experimental investigation of pinching phenomena in cold rolling of thin steel sheets

Cometa, A., Geijselaers, H. J. M., Van Den Boogaard, A. H., Wentink, D. J., Hol, C. W. J., Jacobs, L. J. M. & Kampmeijer, L., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). American Institute of Physics, 040026. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
17 Downloads (Pure)

Finite element modeling of pipe-laying dynamics using corotational elements

de Vries, F. H., Geijselaers, van den Boogaard, A. H. & Huisman, A., 1 Aug 2019, In : International Journal of Computational Methods in Engineering Science and Mechanics. 20, 4, p. 293-307 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
30 Downloads (Pure)

Microscopic investigation of damage mechanisms and anisotropic evolution of damage in DP600

Aşık, E. E., Perdahcıoğlu, E. S. & van den Boogaard, A. H., 2 Jan 2019, In : Materials Science and Engineering A. 739, p. 348-356 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
4 Citations (Scopus)
69 Downloads (Pure)

Modeling Temperature Effects on Friction in Cold Stamping Processes

Hazrati, J., Wang, C., de Rooij, M., Veldhuis, M., Filzek, J., Georgiou, E., Aha, B., Drees, D. & van den Boogaard, T., 2019.

Research output: Contribution to conferencePaper

On the Choice of Basis in Proper Orthogonal Decomposition-Based Surrogate Models

de Gooijer, B. M., Hazrati Marangalou, J., Geijselaers, B. & van den Boogaard, A. H., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming: ESAFORM 2019. Galdos, L., Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Madariaga, A. & Saez de Buruaga, M. (eds.). AIP, 6 p. (AIP Conference Proceedings; vol. 2113, no. 010001).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Downloads (Pure)

Prediction of void growth using gradient enhanced polycrystal plasticity

Perdahcioglu, E. S., Asik, E. E. & Van Den Boogaard, A. H., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). American Institute of Physics, 180016. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Robust optimization based on analytical evaluation of uncertainty propagation

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2 Sep 2019, In : Engineering Optimization. 51, 9, 23 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
1 Citation (Scopus)
27 Downloads (Pure)

Tailoring Material Scatter for Metal Forming Processes based on Inverse Robust Optimization

Nejadseyfi, O., Geijselaers, B. & van den Boogaard, A. H., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. Arrazola, P., Saenz de Argandona, E., Otegi, N., Mendiguren, J., Saez de Buruaga, M., Madariaga, A. & Galdos, L. (eds.). AIP Publishing LLC, Vol. 2113. 6 p. 120005. (AIP Conference Proceedings; vol. 2113).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2018

A class of rate-independent lower-order gradient plasticity theories: Implementation and application to disc torsion problem

Perdahcioğlu, E. S., Soyarslan, C., Asik, E. E., van den Boogaard, T. & Bargmann, S., 14 Aug 2018, In : Materials. 11, 8, 1425.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
1 Citation (Scopus)
80 Downloads (Pure)

A constitutive law based on the self-consistent homogenization theory for improved springback simulation of a dual-phase steel

Torkabadi, A., Perdahcioǧlu, E. S. & van den Boogaard, A. H., 6 Aug 2018, Journal of Physics: Conference series. 1 ed. Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
24 Downloads (Pure)

A continuum model for the effect of dynamic recrystallization on the stress-strain response

Kooiker, H., Perdahcioğlu, E. S. & van den Boogaard, A. H., 22 May 2018, In : Materials. 11, 5, 867.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
37 Downloads (Pure)

Analysis of yield locus description on springback behaviour of CR700Y980T-DP steel

Grubenmann, M., Barth, K., Heingartner, J., Manopulo, N., Hora, P., Torkabadi, A., Van Den Boogaard, T. & Rösen, H., 21 Sep 2018, In : IOP Conference Series: Materials Science and Engineering. 418, 1, 012108.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
41 Downloads (Pure)

An efficient strategy to describe the propagation of variation through multi-stage metal forming processes

De Gooijer, B. M., Hazrati-Marangalou, J., Geijselaers, H. J. M. & Van Den Boogaard, A. H., 2018, Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics. Moens, D., Desmet, W., Pluymers, B. & Rottiers, W. (eds.). Katholieke Universiteit Leuven, p. 5133-5141 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

An insight in friction and wear mechanisms during hot stamping

Venema, J., Hazrati Marangalou, J., Matthews, D. & Van Den Boogaard, T., 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). Trans Tech Publications Ltd, Vol. 767 KEM. p. 131-138 8 p. (Key Engineering Materials; vol. 767 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3 Citations (Scopus)

Evaluation and assessment of non-normal output during robust optimization

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2018, In : Structural and multidisciplinary optimization. 59, 6, p. 2063-2076

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
18 Downloads (Pure)

Feedforward control of sheet bending based on force measurements

Havinga, J., van den Boogaard, T., Dallinger, F. & Hora, P., 1 Jan 2018, In : Journal of Manufacturing Processes. 31, p. 260-272 13 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
5 Citations (Scopus)
62 Downloads (Pure)

Friction in Sheet Metal Forming: Forming Simulations of Dies in Try-Out

Sigvant, M., Pilthammar, J., Hol, J., Wiebenga, J. H., Chezan, T., Carleer, B. & Van Den Boogaard, A. H., 6 Aug 2018, Journal of Physics, Conference series. 1 ed. Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
26 Downloads (Pure)

Friction in Sheet Metal Forming Simulations: Modelling of New Sheet Metal Coatings and Lubricants

Sigvant, M., Pilthammar, J., Hol, J., Wiebenga, J. H., Chezan, T., Carleer, B. & Van Den Boogaard, A. H., 21 Sep 2018, In : IOP Conference Series: Materials Science and Engineering. 418, 1, 012093.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
48 Downloads (Pure)

Investigation of anisotropic damage evolution in dual phase steels

Asik, E. E., Perdahcioglu, E. S. & van den Boogaard, A. H., Feb 2018. 1 p.

Research output: Contribution to conferenceAbstract

INVESTIGATION OF MICROSTRUCTURAL FEATURES ON DAMAGE ANISOTROPY

Asik, E. E., Perdahcioglu, E. S. & van den Boogaard, A. H., Jul 2018, 11th Forming Technology Forum 2018. Zurich, Switzerland: IVP - ETH Zurich, p. 71-71 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Modeling crack initiation in Al-Si coating during heating/quenching phase of hot stamping process

Zaman, S. B., Hazrati Marangalou, J., de Rooij, M. B., Matthews, D. T. A., Venema, J. & van den Boogaard, A. H., 3 Jul 2018, 11th Forming Technology Forum Zurich 2018: Experimental and numerical methods in the FEM based crack prediction. Hora, P. (ed.). ETH Zurich, Switzerland, p. 87-92 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
44 Downloads (Pure)

Multi-scale contact modeling of coated steels for sheet metal forming applications

Shisode, M., Hazrati Marangalou, J., Mishra, T., De Rooij, M. & Van Den Boogaard, T., 2018, Tribology in Manufacturing Processes and Joining by Plastic Deformation II. Bay, N. & Nielsen, C. V. (eds.). Trans Tech Publications Ltd, p. 223-231 9 p. (Key Engineering Materials; vol. 767).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

On anisotropy and non-proportional loading in damage and fracture models

van den Boogaard, A. H., Jul 2018, 11th Forming Technology Forum 2018. Zurich, Switzerland: IVP - ETH Zurich, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

On the nonlinear anelastic behavior of AHSS

Torkabadi, A., Perdahcioğlu, E. S., Meinders, V. T. & van den Boogaard, A. H., 15 Oct 2018, In : International journal of solids and structures. 151, p. 2-8 7 p.

Research output: Contribution to journalArticleAcademicpeer-review

5 Citations (Scopus)
34 Downloads (Pure)

Temperature dependent micromechanics-based friction model for cold stamping processes

Wang, C., Hazrati, J., de Rooij, M. B., Veldhuis, M., Aha, B., Georgiou, E., Drees, D. & van den Boogaard, A. H., 6 Aug 2018, Journal of physics: Conference series. 1 ed. IOP Science, Vol. 1063. 7 p. (Journal of physics: Conference series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
16 Downloads (Pure)

The effects of temperature on friction and wear mechanisms during direct press hardening of Al-Si coated ultra-high strength steel

Venema, J., Hazrati, J., Matthews, D. T. A., Stegeman, R. A. & van den Boogaard, A. H., 15 Jul 2018, In : Wear. 406-407, p. 149-155 7 p.

Research output: Contribution to journalArticleAcademicpeer-review

9 Citations (Scopus)
2 Downloads (Pure)

The evolution of mechanical properties of AISI 301 as a result of phase reversion heat treatment, experiment and modeling

Kooiker, H., Perdahcioǧlu, E. S. & van den Boogaard, T., 6 Aug 2018, In : Journal of physics: Conference series. 1063, 1, 7 p., 12106.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
1 Citation (Scopus)
42 Downloads (Pure)

Tool Texturing for Deep Drawing Applications

Hazrati, J., Stein, P., Kramer, P. & Van Den Boogaard, A. H., 21 Sep 2018, In : IOP Conference Series: Materials Science and Engineering. 418, 1, 012095.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
43 Downloads (Pure)
2017

A continuum model accounting for the effect of the initial and evolving microstructure on the evolution of dynamic recrystallization

Kooiker, H., Perdahcioglu, E. S. & Van Den Boogaard, T., 2017, XIV International Conference on Computational Plasticity, Fundamentals and Applications, COMPLAS 2017. Onate, E., Owen, D. R. J., Peric, D. & Chiumenti, M. (eds.). International Center for Numerical Methods in Engineering, Vol. 2017-January. p. 308-318 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
19 Downloads (Pure)

A nonlinear dynamic corotational finite element model for submerged pipes

De Vries, F. H., Geijselaers, H. J. M., Van Den Boogaard, A. H. & Huisman, A., 12 Dec 2017, In : IOP Conference Series: Materials Science and Engineering. 276, 012030.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
1 Citation (Scopus)
61 Downloads (Pure)

Efficient Calculation of Uncertainty Propagation with an Application in Robust Optimization of Forming Processes

Nejadseyfi, O., Geijselaers, H. J. M. & van den Boogaard, A. H., 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. AIP Publishing LLC, 100004. (AIP Conference Proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)
2 Downloads (Pure)

Estimating product-to-product variations in metal forming using force measurements

Havinga, G. T. & Van Den Boogaard, T., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. American Institute of Physics, Vol. 1896. 070002. (AIP conference proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Friction and Wear Mechanisms During Hot Stamping of AlSi Coated Press Hardening Steel

Loiseaux-Venema, J., Matthews, D. T. A., Hazrati Marangalou, J., Wormann, J. & van den Boogaard, A. H., 2017, In : Wear. p. 137-381

Research output: Contribution to journalArticleAcademicpeer-review

11 Citations (Scopus)

Implementation and application of a gradient enhanced crystal plasticity model

Soyarslan, C., Perdahcioglu, E. S., Asik, E. E., Van Den Boogaard, A. H. & Bargmann, S., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. American Institute of Physics, Vol. 1896. 160008. (AIP conference proceedings; vol. 1896, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)

Modelling of anelastic deformation in dual-phase steel for improved springback simulation

Torkabadi, A., Perdahcioǧlu, E. S. & Van Den Boogaard, A. H., 2017, In : Procedia engineering. 207, p. 185-190 6 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
1 Citation (Scopus)
76 Downloads (Pure)

Numerical and Experimental Validation of a New Damage Initiation Criterion

Sadhinoch, M., Atzema, E. H., Perdahcioglu, E. S. & van den Boogaard, A. H., 27 Sep 2017, In : Journal of physics: Conference series. 896, 1, 012080.

Research output: Contribution to journalConference articleAcademicpeer-review

Open Access
File
2 Citations (Scopus)
103 Downloads (Pure)

Plasticity and fracture modeling of three-layer steel composite Tribond® 1200 for crash simulation

Eller, T., Ramaker, K., Greve, L., Andres, M. T., Hazrati Marangalou, J. & van den Boogaard, A. H., 2017. 6 p.

Research output: Contribution to conferencePaper

Sequential improvement for robust optimization using an uncertainty measure for radial basis functions

Havinga, G. T., van den Boogaard, A. H. & Klaseboer, G., Apr 2017, In : Structural and multidisciplinary optimization. 55, 4, p. 1345-1363 19 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
14 Citations (Scopus)
71 Downloads (Pure)

The influence of ligament modelling strategies on the predictive capability of finite element models of the human knee joint

Naghibi Beidokhti, H., Janssen, D., van de Groes, S., Hazrati, J., Van den Boogaard, T. & Verdonschot, N., Dec 2017, In : Journal of biomechanics. 65, p. 1-11

Research output: Contribution to journalArticleAcademicpeer-review

12 Citations (Scopus)
2016

A comparison between dynamic implicit and explicit finite element simulations of the native knee joint

Naghibi Beidokhti, H., Janssen, D., Khoshgoftar, M., Sprengers, A., Perdahcioglu, E. S., van den Boogaard, A. H. & Verdonschot, N. J. J., 8 Aug 2016, In : Medical engineering & physics. 38, 10, p. 1123-1130

Research output: Contribution to journalArticleAcademicpeer-review

12 Citations (Scopus)

Constitutive modeling of hot horming of austenitic stainless steel 316LN by accounting for recrystallization in the dislocation evolution

Kooiker, H., Perdahcioglu, E. S. & van den Boogaard, A. H., 4 Sep 2016, NUMISHEET 2016: 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. IOP, p. -

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)

Determination of strain hardening parameters of tailor hardened boron steel up to high strains using inverse FEM optimization and strain field matching

Eller, T., Greve, L., Andres, M. T., Medricky, M., Meinders, V. T. & van den Boogaard, A. H., 25 Sep 2016, In : Journal of materials processing technology. 228, p. 43-58 16 p.

Research output: Contribution to journalArticleAcademicpeer-review

21 Citations (Scopus)

Experimentation and Numerical Modeling of Forging Induced Bending (FIB) Process

Naseem, S. & van den Boogaard, A. H., 27 Apr 2016, Proceedings of the 19th International ESAFORM Conference on Material Forming. Nantes, France: American Institue of Physics, p. - (1; vol. 1769).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
62 Downloads (Pure)