Find Research outputs

Search results

• 3D noise modeling for urban environmental planning and management

  Kurakula, V. & Kuffer, M., 2008, RealCorp 008 : mobility nodes as innovation hubs : proceedings of 13th international conference on urban planning, regional development and information society / ed. by M. Schrenk, ... [et al.] - : Competence center of urban and regional planning (CORP), 2008. ISBN: 978-39052139-5-9, pp. 517-523.. CORP, p. 517-523

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3D noise models : a methodology to improve noise modelling and 3D visualisation of noise in urban areas

  Kurakula, V., Stoter, J. E. & de Kluijver, H., 2007, In: Coordinates. 3, 12, p. 24-29

  Research output: Contribution to journal › Article › Academic

• 3D Numerical modeling of laser assisted tape winding process of composite pressure vessels and pipes-effect of winding angle, mandrel curvature and tape width

  Zaami, A., Baran, I., Bor, T. C. & Akkerman, R., 27 May 2020, In: Materials. 13, 11, 2449.

  Research output: Contribution to journal › Article › Academic › peer-review

  Open Access

  File
  7 Citations (Scopus)

  63 Downloads (Pure)

• 3D Numerical Simulation of Direct Aluminum Extrusion & Die Deformation

  Assaad, W., Geijselaers, H. J. M. & Huetink, H., 13 May 2008, Proceedings ET '08, The conference for innovations in aluminum extrusion. Sanderson, J. (ed.). Orlando, Florida, USA: RET Foundation, p. 7pp.-

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3-D Numerical Simulation of Direct Aluminum Extrusion and Die Deformation

  Assaad, W. A., Geijselaers, H. J. M. & Huetink, H., 2008. 7 p.

  Research output: Contribution to conference › Paper

  File
  62 Downloads (Pure)

• 3D Object-based feature extraction from 3-stereo DSM in urban context

  Kulessa, K. & Lang, S., 14 Sep 2016, Proceedings of GEOBIA 2016 : Solutions and synergies, 14-16 September 2016, Enschede, Netherlands. Kerle, N., Gerke, M. & Lefevre, S. (eds.). Enschede: University of Twente, Faculty of Geo-Information Science and Earth Observation (ITC), 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access

  File
  93 Downloads (Pure)

• 3D object-oriented image analysis in 3D geophysical modelling: Analysing the central part of the East African Rift System

  Fadel, I. E. A. M., van der Meijde, M., Kerle, N. & Lauritsen, N., 14 Jan 2015, In: International Journal of Applied Earth Observation and Geoinformation (JAG). 35, part A, p. 44-53 10 p.

  Research output: Contribution to journal › Article › Academic › peer-review

  Open Access

  File
  10 Citations (Scopus)

  83 Downloads (Pure)

• 3D object-oriented image analysis in 3D geophysical modelling : analysing the central part of the East African Rift System : poster.

  Fadel, I. E. A. M., van der Meijde, M. & Kerle, N., 9 Dec 2013, p. 1 p.-.

  Research output: Contribution to conference › Abstract › Other research output

• 3D object - oriented image analysis of geophysical data

  Fadel, I. E. A. M., Kerle, N. & van der Meijde, M., 6 Jun 2014, In: Geophysical journal international. 198, 1, p. 357-365

  Research output: Contribution to journal › Article › Academic › peer-review

  Open Access

  File
  1 Citation (Scopus)

  34 Downloads (Pure)

• 3D object-oriented image analysis with applications in 3D geophysical modeling

  Fadel, I. E. A. M., Kerle, N. & van der Meijde, M., 2014, In: South-Eastern European journal of earth observation and geomatics. 3, 2S, p. 205-208

  Research output: Contribution to journal › Article › Academic › peer-review

  Open Access

  File
  8 Downloads (Pure)

• 3D object reconstruction from aerial stereo images

  Zlatanova, S., Paintsil, J. & Tempfli, K., 1998, WSCG '98 : the 6th international conference in Central Europe on computer graphics and visualization '98 : February 9-13, 1998, Plzen-Bory, Czech Republic, 7 p.. Plzen-Bory, Czech Republic, 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3D Optical Micromanipulation of Ultrasound Contrast Agents

  Overvelde, M. L. J., Garbin, V., Versluis, M., van der Meer, S. M., Cojoc, D., Ferrari, E., de Jong, N., Di Fabrizio, E. & Lohse, D., 3 Oct 2006, p. -.

  Research output: Contribution to conference › Poster › Other research output

• 3D Optical Micromanipulation of Ultrasound Contrast Agents: bubble-wall and bubble-bubble interaction

  Overvelde, M. L. J., Dollet, B., de Jong, N., Lohse, D., Versluis, M., Garbin, V., Ferrari, E., Cojoc, D. & Di Fabrizio, E., 25 Jan 2007, p. -.

  Research output: Contribution to conference › Poster › Other research output

• 3D optical micromanipulation of ultrasound contrast agents: bubble-wall and bubble-bubble interactions

  Overvelde, M. L. J., Calvo-Manzano, A. (ed.), Garbin, V., Perez-Lopez, A. (ed.), Dollet, B., Santiago, J. S. (ed.), Ferrari, E., Cojoc, D., Di Fabrizio, E., de Jong, N., Lohse, D. & Versluis, M., 2 Sep 2007, p. 6736-6741.

  Research output: Contribution to conference › Paper

• 3D Optical Micromanipulation of Ultrasound Contrast Agents: bubble-wall interactions

  Garbin, V., Overvelde, M. L. J., Dollet, B., Ferrari, E., Cojoc, D., Di Fabrizio, E., de Jong, N., Lohse, D. & Versluis, M., 4 Feb 2007, p. -.

  Research output: Contribution to conference › Poster › Other research output

• 3D ordered nanostructures fabricated by nanosphere lithography using an organometallic etch mask

  Ling, X. Y., Acikgoz, C., Phang, I. Y., Hempenius, M. A., Reinhoudt, D., Vancso, G. J. & Huskens, J., 2010, In: Nanoscale. 2, p. 1455-1460 6 p.

  Research output: Contribution to journal › Article › Academic › peer-review
  15 Citations (Scopus)

• 3D parcels basis for 3D cadastre? : comparison of conceptual 3D cadastral models in different countries

  Stoter, J. E., van Oosterom, P. J. M. & Ploeger, H. D., 2004, In: GIM International. 18, 6, p. 1-12-2015

  Research output: Contribution to journal › Article › Academic

• 3D periodic photonic nanostructures with disrupted symmetries

  Devashish, 15 Dec 2017, Enschede: GildePrint. 149 p.

  Research output: Thesis › PhD Thesis - Research UT, graduation UT

  Open Access

  File
  530 Downloads (Pure)

• 3-D photoacoustic imaging in vitro and in vivo

  Pilatou, M. C., de Mul, F. F. M., Marani, E. & van Adrichem, L. N. A., 19 Aug 2001. 1 p.

  Research output: Contribution to conference › Poster › Other research output

• 3D-Photoacoustic Imaging of Blood Vessels

  Hoelen, C. G. A., Pongers, R., Dekker, A. & de Mul, F. F. M., 1998, Trends in Optics and Photonics: Advances in Optical Imaging and Photon Migration. Washington: Tingye Li AT&T labs, p. 386-390 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic

• 3-D Photoacoustic Tissue Imaging

  Hoelen, C. G. A., 17 Apr 1998, Enschede: Universiteit Twente. 198 p.

  Research output: Thesis › PhD Thesis - Research UT, graduation UT

• 3D photonic nanostructures in charge of light propagation

  Grishina, D., Ojambati, O. S., Hofste, J., Yeganegi Dastgerdi, E., Huisman, S. R., Nair, R., Harteveld, C. A. M., Mosk, A. & Vos, W. L., 21 Jun 2016, p. -.

  Research output: Contribution to conference › Poster › Other research output

• 3D photonic nanostructures in charge of light propagation

  Grishina, D., Ojambati, O. S., Hofstede, J., Yeganegi Dastgerdi, E., Huisman, S. R., Nair, R., Harteveld, C. A. M., Mosk, A. & Vos, W. L., 19 Jan 2016, p. -.

  Research output: Contribution to conference › Poster › Other research output

• 3D Photonic structures fabricated by Focused Ion Beam milling

  Tjerkstra, R. W., Segerink, F. B. & Vos, W. L., 19 Jun 2005, p. -.

  Research output: Contribution to conference › Poster › Other research output

• 3D pilot : eindrapport werkgroep aanbod van 3D geo - informatie

  Goos, J., Klooster, R., Stoter, J. E., Verbree, E., Vestjens, G. & Vosselman, G., 2011, Delft: Nederlandse Commissie voor Geodesie. 83 p. (Nederlandse Commissie voor Geodesie, Groene serie; no. 52)

  Research output: Book/Report › Book › Academic

• 3D pilot : managementsamenvatting : impressie van een jaar samenwerken

  Stoter, J. E., Goos, J., Klooster, R., Reuvers, M., Verbree, E., Vestjens, G. & Vosselman, G., 2011, Delft: Nederlandse Commissie voor Geodesie. 83 p. (Nederlandse Commissie voor Geodesie, Groene serie; no. 51)

  Research output: Book/Report › Book › Academic

• 3D position estimation of flexible instruments: marker-less and marker-based methods

  Reilink, R., Stramigioli, S. & Misra, S., 3 Jul 2013, In: International journal of computer assisted radiology and surgery. 8, 3, p. 407-417 11 p.

  Research output: Contribution to journal › Article › Academic › peer-review
  22 Citations (Scopus)

• 3D-printable low-reduction cycloidal gearing for robotics

  Roozing, W. & Roozing, G., 26 Dec 2022, IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2022. IEEE, p. 1929-1935 7 p. (IEEE International Conference on Intelligent Robots and Systems; vol. 2022-October).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

• 3D-printed bioactive scaffolds from nanosilicates and PEOT/PBT for bone tissue engineering

  Carrow, J. K., Luca, A. D., Dolatshahi-Pirouz, A., Moroni, L. & Gaharwar, A. K., 1 Feb 2019, In: Regenerative Biomaterials. 6, 1, p. 29-37 9 p.

  Research output: Contribution to journal › Article › Academic › peer-review

  Open Access

  File
  22 Citations (Scopus)

  7 Downloads (Pure)

• 3D printed bio-inspired angular acceleration sensor

  van Tiem, J., Groenesteijn, J., Sanders, R. G. P. & Krijnen, G. J. M., 1 Nov 2015, Proceedings IEEE Sensors 2015. Piscataway: IEEE, p. 1430-1433 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  File
  17 Citations (Scopus)

  173 Downloads (Pure)

• 3D printed biomimetic whisker-based sensor with co-planar capacitive sensing

  Delamare, J., Sanders, R. G. P. & Krijnen, G. J. M., 1 Nov 2016, 2016 IEEE SENSORS. Piscataway, NJ, USA: IEEE, p. 676-678 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
  5 Citations (Scopus)

  4 Downloads (Pure)

• 3D-Printed Calorimetric Flow Sensor

  Wolterink, G., Umrani, A., Schouten, M., Sanders, R. G. P. & Krijnen, G., 9 Dec 2020, 2020 IEEE Sensors. IEEE, 9278640

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access

  File
  6 Citations (Scopus)

  168 Downloads (Pure)

• 3D printed capacitive shear and normal force sensor using a highly flexible dielectric

  Schouten, M., Spaan, C., Kosmas, D., Sanders, R. G. P. & Krijnen, G., 14 Sep 2021, 2021 IEEE Sensors Applications Symposium (SAS). Piscataway, NJ: IEEE, 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access

  File
  3 Citations (Scopus)

  152 Downloads (Pure)

• 3D Printed Cartilage-Like Tissue Constructs with Spatially Controlled Mechanical Properties

  de Melo, B. A. G., Jodat, Y. A., Mehrotra, S., Calabrese, M. A., Kamperman, T., Mandal, B. B., Santana, M. H. A., Alsberg, E., Leijten, J. & Ryon Shin, S., 19 Dec 2019, In: Advanced functional materials. 29, 51, 1906330.

  Research output: Contribution to journal › Article › Academic › peer-review

  Open Access

  File
  63 Citations (Scopus)

  141 Downloads (Pure)

• 3D printed Coriolis mass flow sensor

  Yariesbouei, M., Sanders, R. G. P., Wiegerink, R. J. & Lötters, J. C., 2022.

  Research output: Working paper

• 3D Printed Differential Force and Position Sensor Based on Lossy Transmission Lines

  Schouten, M., Patel, P., Sanders, R. G. P. & Krijnen, G., 20 Jun 2021, 21st International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS 2021. p. 1460-1463 4 p. (International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS); vol. 2021, no. 21).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access

  File
  3 Citations (Scopus)

  91 Downloads (Pure)

• 3D printed electrically-driven soft actuators

  Haghiashtiani, G., Habtour, E. M., Park, S-H., Gardea, F. & McAlpine, M. C., 1 May 2018, In: Extreme Mechanics Letters. 21, p. 1-8 8 p.

  Research output: Contribution to journal › Article › Academic › peer-review
  79 Citations (Scopus)

  5 Downloads (Pure)

• 3D printed features in the 100 μm range for application in sensing

  Verhaar, J., Sanders, R. G. P. & Krijnen, G. J. M., 1 Nov 2015, Proceedings IEEE Sensors 2015. Piscataway, NJ, USA: IEEE, p. 478-481 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  File
  44 Downloads (Pure)

• 3D printed flexible capacitive force sensor with a simple micro-controller based readout

  Schouten, M. G., Sanders, R. & Krijnen, G., 21 Dec 2017, IEEE SENSORS 2017. IEEE, 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access

  File
  25 Citations (Scopus)

  1082 Downloads (Pure)

• 3D-printed flexure-based finger joints for anthropomorphic hands

  Garcia Rodriguez, L. A., Naves, M. & Brouwer, D. M., 1 Oct 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 1437-1442 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
  6 Citations (Scopus)

  4 Downloads (Pure)

• 3D printed hydrogel soft actuators

  Zolfagharian, A., Kouzani, A. Z., Khoo, S. Y., Gibson, I. & Kaynak, A., 8 Feb 2017, Proceedings of the 2016 IEEE Region 10 Conference, TENCON 2016. IEEE, p. 2272-2277 6 p. 7848433

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review
  23 Citations (Scopus)

• 3D printed Magnetically Deformable Hydrogels in a Granular Medium for Tissue Engineering applications

  El Akkawi, M., Trikalitis, V. D., Gibson, I., Goulas, K. & Rouwkema, J., 2 Dec 2022.

  Research output: Contribution to conference › Poster › Academic

  3 Downloads (Pure)

• 3D printed magnet robots for cell delivery with tuned flexibility

  Magdanz, V., Llobera, A., Fuentes, J., Mahdy, D., S. M. Khalil, I., Guix, M. & Sanchez, S., 1 Oct 2021.

  Research output: Contribution to conference › Abstract › Academic

  Open Access

  File
  59 Downloads (Pure)

• 3D printed mold leachates in PDMS microfluidic devices

  Ferraz, M., Nagashima, J. B., Venzac, B., le Gac, S. & Songsasen, N., 22 Jan 2020, In: Scientific reports. 10, 1, 994.

  Research output: Contribution to journal › Article › Academic › peer-review

  Open Access

  File
  27 Citations (Scopus)

  116 Downloads (Pure)

• 3D printed on-chip parabolic mirror for chip-to-fiber and chip-to-chip coupling

  Kong, Y., Offerhaus, H. L., Dijkstra, M. & García Blanco, S. M., 4 May 2022.

  Research output: Contribution to conference › Paper › peer-review

• 3D printed sensing systems for upper extremity assessment

  Wolterink, G., 11 Feb 2022, Enschede: University of Twente. 155 p.

  Research output: Thesis › PhD Thesis - Research UT, graduation UT

  Open Access

  File
  419 Downloads (Pure)

• 3D Printing for Microgel-Based Liver Cell Encapsulation

  O'Connor, J. S., Kim, H., Gwag, E., Abelmann, L., Sung, B. & Manz, A., 15 Mar 2021, 34th IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2021. Piscataway, NJ: IEEE, p. 1023-1026 4 p. 9375385. (IEEE International Conference on Micro Electro Mechanical Systems (MEMS); vol. 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access

  File
  2 Citations (Scopus)

  19 Downloads (Pure)

• 3D-Printing of a Lemon Battery via Fused Deposition Modelling and Electrodeposition

  Dijkshoorn, A., Šćulac, L., Sanders, R. G. P., Olthuis, W., Stramigioli, S. & Krijnen, G., 30 Oct 2020, 2020 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS). IEEE

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access

  File
  1 Citation (Scopus)

  63 Downloads (Pure)

• 3D Printing of a Photo-thermal Self-folding Actuator

  Zolfagharian, A., Kouzani, A. Z., Nasri-Nasrabadi, B., Adams, S., Khoo, S. Y., Norton, M., Gibson, I. & Kaynak, A., 9 Feb 2017, DesTech 2016: Proceedings of the International Conference on Design and Technology. KnowledgeE, p. 15-22

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

  Open Access

  File
  14 Downloads (Pure)

• 3D printing of functional structures

  Krijnen, G. J. M., Feb 2016, In: Vonk. 34, 1, p. 10-20 11 p.

  Research output: Contribution to journal › Article › Popular

  File
  133 Downloads (Pure)