A highly efficient 3D micromixer fabricated by standard soft-lithography equipement

T. Naito; Rerngchai Arayanarakool; N. Kaji; Severine le Gac; M. Tokeshi; Albert van den Berg; Y. Baba

A highly efficient 3D micromixer fabricated by standard soft-lithography equipement

T. Naito, Rerngchai Arayanarakool, N. Kaji, Severine le Gac, M. Tokeshi, Albert van den Berg, Y. Baba

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2 Citations (Scopus)

1 Downloads (Pure)

Abstract

This paper reports a stereolithography-like 3D fabrication method based on soft-lithography techniques. It only requires standard equipment for photolithography, but it makes true 3D structures fabrication possible. We developed a rotating partition by this method in a microfluidic channel, which cannot be achieved by conventional soft-lithography, and demonstrated a prototyping three-dimensional flow mixer.

Original language	Undefined
Title of host publication	The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012
Editors	T. Fujii, A. Hibara, S. Takeuchi, T. Fukuba
Publisher	The Chemical and Biological Microsystems Society
Pages	662-664
Number of pages	3
ISBN (Print)	1556-5904
Publication status	Published - 28 Oct 2012
Event	16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, µTAS 2012 - Okinawa, Japan Duration: 28 Oct 2012 → 1 Nov 2012 Conference number: 16

Publication series

Name	microTAS
Publisher	chemical and Biological Microsystems Society
ISSN (Print)	1556-5904

Conference

Conference	16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, µTAS 2012
Abbreviated title	MicroTAS
Country/Territory	Japan
City	Okinawa
Period	28/10/12 → 1/11/12

Keywords

IR-83541
METIS-293258
EWI-22718

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

http://eprints.eemcs.utwente.nl/secure2/22718/01/M.5.131.pdf

Cite this

Naito, T., Arayanarakool, R., Kaji, N., le Gac, S., Tokeshi, M., van den Berg, A., & Baba, Y. (2012). A highly efficient 3D micromixer fabricated by standard soft-lithography equipement. In T. Fujii, A. Hibara, S. Takeuchi, & T. Fukuba (Eds.), The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012 (pp. 662-664). (microTAS). The Chemical and Biological Microsystems Society. http://eprints.eemcs.utwente.nl/secure2/22718/01/M.5.131.pdf

Naito, T. ; Arayanarakool, Rerngchai ; Kaji, N. et al. / A highly efficient 3D micromixer fabricated by standard soft-lithography equipement. The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012. editor / T. Fujii ; A. Hibara ; S. Takeuchi ; T. Fukuba. The Chemical and Biological Microsystems Society, 2012. pp. 662-664 (microTAS).

@inproceedings{2775255a6b724e909e87a63b46c9790c,

title = "A highly efficient 3D micromixer fabricated by standard soft-lithography equipement",

abstract = "This paper reports a stereolithography-like 3D fabrication method based on soft-lithography techniques. It only requires standard equipment for photolithography, but it makes true 3D structures fabrication possible. We developed a rotating partition by this method in a microfluidic channel, which cannot be achieved by conventional soft-lithography, and demonstrated a prototyping three-dimensional flow mixer.",

keywords = "IR-83541, METIS-293258, EWI-22718",

author = "T. Naito and Rerngchai Arayanarakool and N. Kaji and {le Gac}, Severine and M. Tokeshi and {van den Berg}, Albert and Y. Baba",

year = "2012",

month = oct,

day = "28",

language = "Undefined",

isbn = "1556-5904",

series = "microTAS",

publisher = "The Chemical and Biological Microsystems Society",

pages = "662--664",

editor = "T. Fujii and A. Hibara and S. Takeuchi and T. Fukuba",

booktitle = "The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012",

note = "16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, µTAS 2012 ; Conference date: 28-10-2012 Through 01-11-2012",

}

Naito, T, Arayanarakool, R, Kaji, N, le Gac, S, Tokeshi, M, van den Berg, A & Baba, Y 2012, A highly efficient 3D micromixer fabricated by standard soft-lithography equipement. in T Fujii, A Hibara, S Takeuchi & T Fukuba (eds), The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012. microTAS, The Chemical and Biological Microsystems Society, pp. 662-664, 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, µTAS 2012, Okinawa, Japan, 28/10/12. <http://eprints.eemcs.utwente.nl/secure2/22718/01/M.5.131.pdf>

A highly efficient 3D micromixer fabricated by standard soft-lithography equipement. / Naito, T.; Arayanarakool, Rerngchai; Kaji, N. et al.
The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012. ed. / T. Fujii; A. Hibara; S. Takeuchi; T. Fukuba. The Chemical and Biological Microsystems Society, 2012. p. 662-664 (microTAS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - A highly efficient 3D micromixer fabricated by standard soft-lithography equipement

AU - Naito, T.

AU - Arayanarakool, Rerngchai

AU - Kaji, N.

AU - le Gac, Severine

AU - Tokeshi, M.

AU - van den Berg, Albert

AU - Baba, Y.

N1 - Conference code: 16

PY - 2012/10/28

Y1 - 2012/10/28

N2 - This paper reports a stereolithography-like 3D fabrication method based on soft-lithography techniques. It only requires standard equipment for photolithography, but it makes true 3D structures fabrication possible. We developed a rotating partition by this method in a microfluidic channel, which cannot be achieved by conventional soft-lithography, and demonstrated a prototyping three-dimensional flow mixer.

AB - This paper reports a stereolithography-like 3D fabrication method based on soft-lithography techniques. It only requires standard equipment for photolithography, but it makes true 3D structures fabrication possible. We developed a rotating partition by this method in a microfluidic channel, which cannot be achieved by conventional soft-lithography, and demonstrated a prototyping three-dimensional flow mixer.

KW - IR-83541

KW - METIS-293258

KW - EWI-22718

M3 - Conference contribution

SN - 1556-5904

T3 - microTAS

SP - 662

EP - 664

BT - The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012

A2 - Fujii, T.

A2 - Hibara, A.

A2 - Takeuchi, S.

A2 - Fukuba, T.

PB - The Chemical and Biological Microsystems Society

T2 - 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, µTAS 2012

Y2 - 28 October 2012 through 1 November 2012

ER -

Naito T, Arayanarakool R, Kaji N, le Gac S, Tokeshi M, van den Berg A et al. A highly efficient 3D micromixer fabricated by standard soft-lithography equipement. In Fujii T, Hibara A, Takeuchi S, Fukuba T, editors, The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012. The Chemical and Biological Microsystems Society. 2012. p. 662-664. (microTAS).