A review of friction stir welding pin profile

S. Emamian; M. Awang; F. Yusof; P. Hussain; M. Mehrpouya; S. Kakooei; M. Moayedfar; A. Zafar

doi:10.1007/978-981-10-4232-4_1

A review of friction stir welding pin profile

S. Emamian, M. Awang, F. Yusof, P. Hussain, M. Mehrpouya, S. Kakooei, M. Moayedfar, A. Zafar

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

22 Citations (Scopus)

Abstract

Friction stir welding (FSW) is a solid state joining process where the joint occurs below the melting point of the base metal. Recently, not only soft materials but also high melting materials have been given an attention in FSW research activities. There are many studies on high melting materials such as steel, titanium, and inconel. There are different parameters which contribute to the joint quality. Many researchers have studied on the traverse and rotational speeds as the main process parameters in order to obtain optimum weld quality. Tool geometry is another important parameter that has an influence on the weld quality. This paper aims to review the development of various pin profiles and its effects to the microstructure and mechanical properties of the weld joint. Based on the published papers, square pin profile produced sound joints. However, in other studies threaded cylinder or threaded taper provides better joints. Above all, there is an equal result among all studies in which threaded shapes are most effective on tool performance.

Original language	English
Title of host publication	2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering
Editors	Mokhtar Awang
Place of Publication	978-981-10-4231-7
Publisher	Springer
Pages	1-18
ISBN (Electronic)	978-981-10-4232-4
ISBN (Print)	978-981-10-4231-7
DOIs	https://doi.org/10.1007/978-981-10-4232-4_1
Publication status	Published - 2017
Externally published	Yes
Event	2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering, ICMMPE 2016 - Kuala Lumpur, Malaysia Duration: 23 Nov 2016 → 24 Nov 2016 Conference number: 2

Publication series

Name	Lecture Notes in Mechanical Engineering
Publisher	Springer
ISSN (Print)	2195-4356
ISSN (Electronic)	2195-4364

Conference

Conference	2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering, ICMMPE 2016
Abbreviated title	ICMMPE
Country/Territory	Malaysia
City	Kuala Lumpur
Period	23/11/16 → 24/11/16

Access to Document

10.1007/978-981-10-4232-4_1

Cite this

Emamian, S., Awang, M., Yusof, F., Hussain, P., Mehrpouya, M., Kakooei, S., Moayedfar, M., & Zafar, A. (2017). A review of friction stir welding pin profile. In M. Awang (Ed.), 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (pp. 1-18). (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-981-10-4232-4_1

@inproceedings{e1ed36d14cda465c9432f64a3c7bb387,

title = "A review of friction stir welding pin profile",

abstract = "Friction stir welding (FSW) is a solid state joining process where the joint occurs below the melting point of the base metal. Recently, not only soft materials but also high melting materials have been given an attention in FSW research activities. There are many studies on high melting materials such as steel, titanium, and inconel. There are different parameters which contribute to the joint quality. Many researchers have studied on the traverse and rotational speeds as the main process parameters in order to obtain optimum weld quality. Tool geometry is another important parameter that has an influence on the weld quality. This paper aims to review the development of various pin profiles and its effects to the microstructure and mechanical properties of the weld joint. Based on the published papers, square pin profile produced sound joints. However, in other studies threaded cylinder or threaded taper provides better joints. Above all, there is an equal result among all studies in which threaded shapes are most effective on tool performance.",

author = "S. Emamian and M. Awang and F. Yusof and P. Hussain and M. Mehrpouya and S. Kakooei and M. Moayedfar and A. Zafar",

year = "2017",

doi = "10.1007/978-981-10-4232-4_1",

language = "English",

isbn = "978-981-10-4231-7",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer",

pages = "1--18",

editor = "Mokhtar Awang",

booktitle = "2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering",

address = "Germany",

note = "2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering, ICMMPE 2016, ICMMPE ; Conference date: 23-11-2016 Through 24-11-2016",

}

Emamian, S, Awang, M, Yusof, F, Hussain, P, Mehrpouya, M, Kakooei, S, Moayedfar, M & Zafar, A 2017, A review of friction stir welding pin profile. in M Awang (ed.), 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering. Lecture Notes in Mechanical Engineering, Springer, 978-981-10-4231-7, pp. 1-18, 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering, ICMMPE 2016, Kuala Lumpur, Malaysia, 23/11/16. https://doi.org/10.1007/978-981-10-4232-4_1

A review of friction stir welding pin profile. / Emamian, S.; Awang, M.; Yusof, F. et al.
2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering. ed. / Mokhtar Awang. 978-981-10-4231-7: Springer, 2017. p. 1-18 (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - A review of friction stir welding pin profile

AU - Emamian, S.

AU - Awang, M.

AU - Yusof, F.

AU - Hussain, P.

AU - Mehrpouya, M.

AU - Kakooei, S.

AU - Moayedfar, M.

AU - Zafar, A.

N1 - Conference code: 2

PY - 2017

Y1 - 2017

N2 - Friction stir welding (FSW) is a solid state joining process where the joint occurs below the melting point of the base metal. Recently, not only soft materials but also high melting materials have been given an attention in FSW research activities. There are many studies on high melting materials such as steel, titanium, and inconel. There are different parameters which contribute to the joint quality. Many researchers have studied on the traverse and rotational speeds as the main process parameters in order to obtain optimum weld quality. Tool geometry is another important parameter that has an influence on the weld quality. This paper aims to review the development of various pin profiles and its effects to the microstructure and mechanical properties of the weld joint. Based on the published papers, square pin profile produced sound joints. However, in other studies threaded cylinder or threaded taper provides better joints. Above all, there is an equal result among all studies in which threaded shapes are most effective on tool performance.

AB - Friction stir welding (FSW) is a solid state joining process where the joint occurs below the melting point of the base metal. Recently, not only soft materials but also high melting materials have been given an attention in FSW research activities. There are many studies on high melting materials such as steel, titanium, and inconel. There are different parameters which contribute to the joint quality. Many researchers have studied on the traverse and rotational speeds as the main process parameters in order to obtain optimum weld quality. Tool geometry is another important parameter that has an influence on the weld quality. This paper aims to review the development of various pin profiles and its effects to the microstructure and mechanical properties of the weld joint. Based on the published papers, square pin profile produced sound joints. However, in other studies threaded cylinder or threaded taper provides better joints. Above all, there is an equal result among all studies in which threaded shapes are most effective on tool performance.

UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-85019629496&partnerID=MN8TOARS

U2 - 10.1007/978-981-10-4232-4_1

DO - 10.1007/978-981-10-4232-4_1

M3 - Conference contribution

SN - 978-981-10-4231-7

T3 - Lecture Notes in Mechanical Engineering

SP - 1

EP - 18

BT - 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering

A2 - Awang, Mokhtar

PB - Springer

CY - 978-981-10-4231-7

T2 - 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering, ICMMPE 2016

Y2 - 23 November 2016 through 24 November 2016

ER -

A review of friction stir welding pin profile

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this