Brandaris 128 ultra-high-speed imaging facility: 10 years of operation, updates, and enhanced features

Erik C. Gelderblom; Hendrik J. Vos; Frits Mastik; Telli Faez; Ying Luan; Tom J.A. Kokhuis; Antonius F.W. van der Steen; Detlef  Lohse; N. de Jong; Michel Versluis

doi:10.1063/1.4758783

Brandaris 128 ultra-high-speed imaging facility: 10 years of operation, updates, and enhanced features

Erik C. Gelderblom, Hendrik J. Vos, Frits Mastik, Telli Faez, Ying Luan, Tom J.A. Kokhuis, Antonius F.W. van der Steen, Detlef Lohse, N. de Jong, Michel Versluis

Research output: Contribution to journal › Article › Academic › peer-review

46 Citations (Scopus)

220 Downloads (Pure)

Abstract

The Brandaris 128 ultra-high-speed imaging facility has been updated over the last 10 years through modifications made to the camera's hardware and software. At its introduction the camera was able to record 6 sequences of 128 images (500 × 292 pixels) at a maximum frame rate of 25 Mfps. The segmented mode of the camera was revised to allow for subdivision of the 128 image sensors into arbitrary segments (1–128) with an inter-segment time of 17 μs. Furthermore, a region of interest can be selected to increase the number of recordings within a single run of the camera from 6 up to 125. By extending the imaging system with a laser-induced fluorescence setup, time-resolved ultra-high-speed fluorescence imaging of microscopic objects has been enabled. Minor updates to the system are also reported here

Original language	English
Article number	103706
Number of pages	11
Journal	Review of scientific instruments
Volume	83
Issue number	10
DOIs	https://doi.org/10.1063/1.4758783
Publication status	Published - 2012

Keywords

METIS-292955
IR-83135

Access to Document

10.1063/1.4758783

Gelderblom2012brandarisFinal published version, 540 KB

Cite this

@article{27e574c6712e4a248d1c163d1f1865cc,

title = "Brandaris 128 ultra-high-speed imaging facility: 10 years of operation, updates, and enhanced features",

abstract = "The Brandaris 128 ultra-high-speed imaging facility has been updated over the last 10 years through modifications made to the camera's hardware and software. At its introduction the camera was able to record 6 sequences of 128 images (500 × 292 pixels) at a maximum frame rate of 25 Mfps. The segmented mode of the camera was revised to allow for subdivision of the 128 image sensors into arbitrary segments (1–128) with an inter-segment time of 17 μs. Furthermore, a region of interest can be selected to increase the number of recordings within a single run of the camera from 6 up to 125. By extending the imaging system with a laser-induced fluorescence setup, time-resolved ultra-high-speed fluorescence imaging of microscopic objects has been enabled. Minor updates to the system are also reported here",

keywords = "METIS-292955, IR-83135",

author = "Gelderblom, {Erik C.} and Vos, {Hendrik J.} and Frits Mastik and Telli Faez and Ying Luan and Kokhuis, {Tom J.A.} and {van der Steen}, {Antonius F.W.} and Detlef Lohse and {de Jong}, N. and Michel Versluis",

year = "2012",

doi = "10.1063/1.4758783",

language = "English",

volume = "83",

journal = "Review of scientific instruments",

issn = "0034-6748",

publisher = "American Institute of Physics",

number = "10",

}

TY - JOUR

T1 - Brandaris 128 ultra-high-speed imaging facility: 10 years of operation, updates, and enhanced features

AU - Gelderblom, Erik C.

AU - Vos, Hendrik J.

AU - Mastik, Frits

AU - Faez, Telli

AU - Luan, Ying

AU - Kokhuis, Tom J.A.

AU - van der Steen, Antonius F.W.

AU - Lohse, Detlef

AU - de Jong, N.

AU - Versluis, Michel

PY - 2012

Y1 - 2012

N2 - The Brandaris 128 ultra-high-speed imaging facility has been updated over the last 10 years through modifications made to the camera's hardware and software. At its introduction the camera was able to record 6 sequences of 128 images (500 × 292 pixels) at a maximum frame rate of 25 Mfps. The segmented mode of the camera was revised to allow for subdivision of the 128 image sensors into arbitrary segments (1–128) with an inter-segment time of 17 μs. Furthermore, a region of interest can be selected to increase the number of recordings within a single run of the camera from 6 up to 125. By extending the imaging system with a laser-induced fluorescence setup, time-resolved ultra-high-speed fluorescence imaging of microscopic objects has been enabled. Minor updates to the system are also reported here

AB - The Brandaris 128 ultra-high-speed imaging facility has been updated over the last 10 years through modifications made to the camera's hardware and software. At its introduction the camera was able to record 6 sequences of 128 images (500 × 292 pixels) at a maximum frame rate of 25 Mfps. The segmented mode of the camera was revised to allow for subdivision of the 128 image sensors into arbitrary segments (1–128) with an inter-segment time of 17 μs. Furthermore, a region of interest can be selected to increase the number of recordings within a single run of the camera from 6 up to 125. By extending the imaging system with a laser-induced fluorescence setup, time-resolved ultra-high-speed fluorescence imaging of microscopic objects has been enabled. Minor updates to the system are also reported here

KW - METIS-292955

KW - IR-83135

U2 - 10.1063/1.4758783

DO - 10.1063/1.4758783

M3 - Article

VL - 83

JO - Review of scientific instruments

JF - Review of scientific instruments

SN - 0034-6748

IS - 10

M1 - 103706

ER -

Brandaris 128 ultra-high-speed imaging facility: 10 years of operation, updates, and enhanced features

Abstract

Keywords

Access to Document

Fingerprint

Cite this