Comparing Various Measurements and Simulation Techniques for Estimating Crosstalk

Jesper Hermanus Gerhardus Johannes Lansink Rotgerink; Georgios Erotas; Niek Moonen; Frank Leferink

doi:10.1109/EMCEUROPE48519.2020.9245852

Comparing Various Measurements and Simulation Techniques for Estimating Crosstalk

Jesper Hermanus Gerhardus Johannes Lansink Rotgerink, Georgios Erotas, Niek Moonen, Frank Leferink

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Abstract

A comparison between crosstalk measurement techniques is made to investigate their applicability and efficiency for determining crosstalk between cables above a ground plane made of copper or carbon-fibre reinforced plastic (CFRP). Cost effectiveness, accuracy, speed and complexity of the methods are evaluated. All measurements are performed on two PCBs containing two pairs of copper traces. The techniques that are considered include balanced Vector Network Analyzer (VNA) measurements, balanced Spectrum Analyzer (SA) measurements, balanced EMI receiver (EMI-R) measurements, single-ended VNA measurements converted to mixed-mode S-parameters, and finally measurements with a signal generator (SG) and an oscilloscope (OSC). For verification, measured results are also compared to three simulation techniques, involving a Method of Moments simulation and two different transmission line models.

Original language	English
Title of host publication	2020 International Symposium on Electromagnetic Compatibility - EMC EUROPE
Place of Publication	USA
Publisher	IEEE Electromagnetic Compatibility Society
Pages	1-6
Number of pages	6
ISBN (Electronic)	978-1-7281-5579-1
ISBN (Print)	978-1-7281-5580-7
DOIs	https://doi.org/10.1109/EMCEUROPE48519.2020.9245852
Publication status	Published - 6 Nov 2020
Event	International Symposium on Electromagnetic Compatibility, EMC EUROPE 2020 - Virtual Conference, Rome, Italy Duration: 23 Sep 2020 → 26 Sep 2020

Conference

Conference	International Symposium on Electromagnetic Compatibility, EMC EUROPE 2020
Abbreviated title	EMC EUROPE 2020
Country	Italy
City	Rome
Period	23/09/20 → 26/09/20

Access to Document

10.1109/EMCEUROPE48519.2020.9245852

Fingerprint Dive into the research topics of 'Comparing Various Measurements and Simulation Techniques for Estimating Crosstalk'. Together they form a unique fingerprint.

Cite this

@inproceedings{c11eb7990bc14c178a555c36e95733fd,

title = "Comparing Various Measurements and Simulation Techniques for Estimating Crosstalk",

abstract = "A comparison between crosstalk measurement techniques is made to investigate their applicability and efficiency for determining crosstalk between cables above a ground plane made of copper or carbon-fibre reinforced plastic (CFRP). Cost effectiveness, accuracy, speed and complexity of the methods are evaluated. All measurements are performed on two PCBs containing two pairs of copper traces. The techniques that are considered include balanced Vector Network Analyzer (VNA) measurements, balanced Spectrum Analyzer (SA) measurements, balanced EMI receiver (EMI-R) measurements, single-ended VNA measurements converted to mixed-mode S-parameters, and finally measurements with a signal generator (SG) and an oscilloscope (OSC). For verification, measured results are also compared to three simulation techniques, involving a Method of Moments simulation and two different transmission line models.",

author = "{Lansink Rotgerink}, {Jesper Hermanus Gerhardus Johannes} and Georgios Erotas and Niek Moonen and Frank Leferink",

year = "2020",

month = nov,

day = "6",

doi = "10.1109/EMCEUROPE48519.2020.9245852",

language = "English",

isbn = "978-1-7281-5580-7",

pages = "1--6",

booktitle = "2020 International Symposium on Electromagnetic Compatibility - EMC EUROPE",

publisher = "IEEE Electromagnetic Compatibility Society",

note = "International Symposium on Electromagnetic Compatibility, EMC EUROPE 2020, EMC EUROPE 2020 ; Conference date: 23-09-2020 Through 26-09-2020",

}

Lansink Rotgerink, JHGJ, Erotas, G, Moonen, N & Leferink, F 2020, Comparing Various Measurements and Simulation Techniques for Estimating Crosstalk. in 2020 International Symposium on Electromagnetic Compatibility - EMC EUROPE. IEEE Electromagnetic Compatibility Society, USA, pp. 1-6, International Symposium on Electromagnetic Compatibility, EMC EUROPE 2020, Rome, Italy, 23/09/20. https://doi.org/10.1109/EMCEUROPE48519.2020.9245852

Comparing Various Measurements and Simulation Techniques for Estimating Crosstalk. / Lansink Rotgerink, Jesper Hermanus Gerhardus Johannes; Erotas, Georgios; Moonen, Niek ; Leferink, Frank.

2020 International Symposium on Electromagnetic Compatibility - EMC EUROPE. USA : IEEE Electromagnetic Compatibility Society, 2020. p. 1-6.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Comparing Various Measurements and Simulation Techniques for Estimating Crosstalk

AU - Lansink Rotgerink, Jesper Hermanus Gerhardus Johannes

AU - Erotas, Georgios

AU - Moonen, Niek

AU - Leferink, Frank

PY - 2020/11/6

Y1 - 2020/11/6

N2 - A comparison between crosstalk measurement techniques is made to investigate their applicability and efficiency for determining crosstalk between cables above a ground plane made of copper or carbon-fibre reinforced plastic (CFRP). Cost effectiveness, accuracy, speed and complexity of the methods are evaluated. All measurements are performed on two PCBs containing two pairs of copper traces. The techniques that are considered include balanced Vector Network Analyzer (VNA) measurements, balanced Spectrum Analyzer (SA) measurements, balanced EMI receiver (EMI-R) measurements, single-ended VNA measurements converted to mixed-mode S-parameters, and finally measurements with a signal generator (SG) and an oscilloscope (OSC). For verification, measured results are also compared to three simulation techniques, involving a Method of Moments simulation and two different transmission line models.

AB - A comparison between crosstalk measurement techniques is made to investigate their applicability and efficiency for determining crosstalk between cables above a ground plane made of copper or carbon-fibre reinforced plastic (CFRP). Cost effectiveness, accuracy, speed and complexity of the methods are evaluated. All measurements are performed on two PCBs containing two pairs of copper traces. The techniques that are considered include balanced Vector Network Analyzer (VNA) measurements, balanced Spectrum Analyzer (SA) measurements, balanced EMI receiver (EMI-R) measurements, single-ended VNA measurements converted to mixed-mode S-parameters, and finally measurements with a signal generator (SG) and an oscilloscope (OSC). For verification, measured results are also compared to three simulation techniques, involving a Method of Moments simulation and two different transmission line models.

U2 - 10.1109/EMCEUROPE48519.2020.9245852

DO - 10.1109/EMCEUROPE48519.2020.9245852

M3 - Conference contribution

SN - 978-1-7281-5580-7

SP - 1

EP - 6

BT - 2020 International Symposium on Electromagnetic Compatibility - EMC EUROPE

PB - IEEE Electromagnetic Compatibility Society

CY - USA

T2 - International Symposium on Electromagnetic Compatibility, EMC EUROPE 2020

Y2 - 23 September 2020 through 26 September 2020

ER -