Computer support in the (re)design of mechanical products

O.W. Salomons; J.H. Kappert; F. van Slooten; F. J.A.M. van Houten; H.J.J. Kals

Computer support in the (re)design of mechanical products

O.W. Salomons^*
, J.H. Kappert
, F. van Slooten
, F. J.A.M. van Houten
, H.J.J. Kals

^*Corresponding author for this work

University of Twente

Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review

7 Citations (Scopus)

130 Downloads (Pure)

Abstract

Concepts are proposed to improve the computer support in the (re)design of mechanical products. These concepts are combined with a proposal for an improved link between CAD and CAPP systems. The concepts resulted from a methodic design approach aiming at the design of a re-design support system. The concepts incorporate a mixed top-down/bottom-up design strategy. The multiple views problem arising from the use of design and process planning features is dealt with differently when compared with previously published methods. To solve the multiple views problem it is proposed not only to consider the different form features at component level but to also use abstract features and assembly relations in order to yield manufacturing features. Prototype implementations are under development to evaluate the concepts.

Original language	English
Title of host publication	Knowledge Based Hybrid Systems
Subtitle of host publication	Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993
Editors	István Mezgár, Peter Bertók
Publisher	Elsevier
Pages	91-103
Number of pages	13
ISBN (Print)	0-444-81484-1
Publication status	Published - 1993
Event	IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM 1993 - Budapest, Hungary Duration: 20 Apr 1993 → 22 Apr 1993

Publication series

Name	IFIP Transactions
Publisher	North-Holland
Volume	B-11

Conference

Conference	IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM 1993
Abbreviated title	KNOWHSEM
Country/Territory	Hungary
City	Budapest
Period	20/04/93 → 22/04/93

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

ArticleFinal published version, 155 KB

Cite this

Salomons, O. W., Kappert, J. H., van Slooten, F., van Houten, F. J. A. M., & Kals, H. J. J. (1993). Computer support in the (re)design of mechanical products. In I. Mezgár, & P. Bertók (Eds.), Knowledge Based Hybrid Systems: Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (pp. 91-103). ( IFIP Transactions; Vol. B-11). Elsevier.

Salomons, O.W. ; Kappert, J.H. ; van Slooten, F. et al. / Computer support in the (re)design of mechanical products. Knowledge Based Hybrid Systems: Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993. editor / István Mezgár ; Peter Bertók. Elsevier, 1993. pp. 91-103 ( IFIP Transactions).

@inbook{26baa6aeb06046eaac84a69a6bbae25f,

title = "Computer support in the (re)design of mechanical products",

abstract = "Concepts are proposed to improve the computer support in the (re)design of mechanical products. These concepts are combined with a proposal for an improved link between CAD and CAPP systems. The concepts resulted from a methodic design approach aiming at the design of a re-design support system. The concepts incorporate a mixed top-down/bottom-up design strategy. The multiple views problem arising from the use of design and process planning features is dealt with differently when compared with previously published methods. To solve the multiple views problem it is proposed not only to consider the different form features at component level but to also use abstract features and assembly relations in order to yield manufacturing features. Prototype implementations are under development to evaluate the concepts.",

author = "O.W. Salomons and J.H. Kappert and \{van Slooten\}, F. and \{van Houten\}, \{F. J.A.M.\} and H.J.J. Kals",

year = "1993",

language = "English",

isbn = "0-444-81484-1",

series = " IFIP Transactions",

publisher = "Elsevier",

pages = "91--103",

editor = "Istv{\'a}n Mezg{\'a}r and Peter Bert{\'o}k",

booktitle = "Knowledge Based Hybrid Systems",

address = "Spain",

note = "IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM 1993, KNOWHSEM ; Conference date: 20-04-1993 Through 22-04-1993",

}

Salomons, OW, Kappert, JH, van Slooten, F, van Houten, FJAM & Kals, HJJ 1993, Computer support in the (re)design of mechanical products. in I Mezgár & P Bertók (eds), Knowledge Based Hybrid Systems: Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993. IFIP Transactions, vol. B-11, Elsevier, pp. 91-103, IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM 1993, Budapest, Hungary, 20/04/93.

Computer support in the (re)design of mechanical products. / Salomons, O.W.; Kappert, J.H.; van Slooten, F. et al.
Knowledge Based Hybrid Systems: Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993. ed. / István Mezgár; Peter Bertók. Elsevier, 1993. p. 91-103 ( IFIP Transactions; Vol. B-11).

Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review

TY - CHAP

T1 - Computer support in the (re)design of mechanical products

AU - Salomons, O.W.

AU - Kappert, J.H.

AU - van Slooten, F.

AU - van Houten, F. J.A.M.

AU - Kals, H.J.J.

PY - 1993

Y1 - 1993

N2 - Concepts are proposed to improve the computer support in the (re)design of mechanical products. These concepts are combined with a proposal for an improved link between CAD and CAPP systems. The concepts resulted from a methodic design approach aiming at the design of a re-design support system. The concepts incorporate a mixed top-down/bottom-up design strategy. The multiple views problem arising from the use of design and process planning features is dealt with differently when compared with previously published methods. To solve the multiple views problem it is proposed not only to consider the different form features at component level but to also use abstract features and assembly relations in order to yield manufacturing features. Prototype implementations are under development to evaluate the concepts.

AB - Concepts are proposed to improve the computer support in the (re)design of mechanical products. These concepts are combined with a proposal for an improved link between CAD and CAPP systems. The concepts resulted from a methodic design approach aiming at the design of a re-design support system. The concepts incorporate a mixed top-down/bottom-up design strategy. The multiple views problem arising from the use of design and process planning features is dealt with differently when compared with previously published methods. To solve the multiple views problem it is proposed not only to consider the different form features at component level but to also use abstract features and assembly relations in order to yield manufacturing features. Prototype implementations are under development to evaluate the concepts.

UR - https://www.scopus.com/pages/publications/0027746428

M3 - Chapter

AN - SCOPUS:0027746428

SN - 0-444-81484-1

T3 - IFIP Transactions

SP - 91

EP - 103

BT - Knowledge Based Hybrid Systems

A2 - Mezgár, István

A2 - Bertók, Peter

PB - Elsevier

T2 - IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM 1993

Y2 - 20 April 1993 through 22 April 1993

ER -

Salomons OW, Kappert JH, van Slooten F, van Houten FJAM, Kals HJJ. Computer support in the (re)design of mechanical products. In Mezgár I, Bertók P, editors, Knowledge Based Hybrid Systems: Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993. Elsevier. 1993. p. 91-103. ( IFIP Transactions).

Computer support in the (re)design of mechanical products

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this