Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)
1 Downloads (Pure)

Abstract

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The combination with rapid AFP as blank manufacturing technology can further extend the applicability of stamp forming by allowing rapid lay-up of tailored blanks and offering partial preconsolidation. In an experimental study it is demonstrated that high quality laminates with good flexural strength can be obtained by following this process route. The consolidation of ply-drop regions is demonstrated by flat laminates with a thickness step. The influence of fiber orientations, blank-tooling misalignments and AFP tolerances is investigated.

Original languageEnglish
Title of host publicationProceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018
PublisherAmerican Institute of Physics
ISBN (Electronic)9780735416635
DOIs
Publication statusPublished - 2 May 2018
Event21st International ESAFORM Conference on Material Forming, ESAFORM 2018 - Palermo, Italy
Duration: 23 Apr 201825 Apr 2018
Conference number: 21
http://www.esaform2018.com/index.php/en/

Publication series

NameAIP conference proceedings
Volume1960

Conference

Conference21st International ESAFORM Conference on Material Forming, ESAFORM 2018
Abbreviated titleESAFORM 2018
CountryItaly
CityPalermo
Period23/04/1825/04/18
Internet address

Fingerprint

consolidation
blanks
laminates
manufacturing
lay-up
fiber orientation
tooling
flexural strength
misalignment
routes
composite materials

Cite this

Slange, T. K., Warnet, L. L., Grouve, W. J. B., & Akkerman, R. (2018). Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP. In Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018 [020031] (AIP conference proceedings; Vol. 1960). American Institute of Physics. https://doi.org/10.1063/1.5034832
Slange, T.K. ; Warnet, L.L. ; Grouve, W.J.B. ; Akkerman, R. / Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP. Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. American Institute of Physics, 2018. (AIP conference proceedings).
@inproceedings{d69cf13adbf24782bc9f2c5adb209edf,
title = "Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP",
abstract = "Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The combination with rapid AFP as blank manufacturing technology can further extend the applicability of stamp forming by allowing rapid lay-up of tailored blanks and offering partial preconsolidation. In an experimental study it is demonstrated that high quality laminates with good flexural strength can be obtained by following this process route. The consolidation of ply-drop regions is demonstrated by flat laminates with a thickness step. The influence of fiber orientations, blank-tooling misalignments and AFP tolerances is investigated.",
author = "T.K. Slange and L.L. Warnet and W.J.B. Grouve and R. Akkerman",
year = "2018",
month = "5",
day = "2",
doi = "10.1063/1.5034832",
language = "English",
series = "AIP conference proceedings",
publisher = "American Institute of Physics",
booktitle = "Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018",
address = "United States",

}

Slange, TK, Warnet, LL, Grouve, WJB & Akkerman, R 2018, Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP. in Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018., 020031, AIP conference proceedings, vol. 1960, American Institute of Physics, 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23/04/18. https://doi.org/10.1063/1.5034832

Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP. / Slange, T.K.; Warnet, L.L.; Grouve, W.J.B.; Akkerman, R.

Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. American Institute of Physics, 2018. 020031 (AIP conference proceedings; Vol. 1960).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

TY - GEN

T1 - Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP

AU - Slange, T.K.

AU - Warnet, L.L.

AU - Grouve, W.J.B.

AU - Akkerman, R.

PY - 2018/5/2

Y1 - 2018/5/2

N2 - Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The combination with rapid AFP as blank manufacturing technology can further extend the applicability of stamp forming by allowing rapid lay-up of tailored blanks and offering partial preconsolidation. In an experimental study it is demonstrated that high quality laminates with good flexural strength can be obtained by following this process route. The consolidation of ply-drop regions is demonstrated by flat laminates with a thickness step. The influence of fiber orientations, blank-tooling misalignments and AFP tolerances is investigated.

AB - Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The combination with rapid AFP as blank manufacturing technology can further extend the applicability of stamp forming by allowing rapid lay-up of tailored blanks and offering partial preconsolidation. In an experimental study it is demonstrated that high quality laminates with good flexural strength can be obtained by following this process route. The consolidation of ply-drop regions is demonstrated by flat laminates with a thickness step. The influence of fiber orientations, blank-tooling misalignments and AFP tolerances is investigated.

UR - http://www.scopus.com/inward/record.url?scp=85047364041&partnerID=8YFLogxK

U2 - 10.1063/1.5034832

DO - 10.1063/1.5034832

M3 - Conference contribution

T3 - AIP conference proceedings

BT - Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018

PB - American Institute of Physics

ER -

Slange TK, Warnet LL, Grouve WJB, Akkerman R. Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP. In Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. American Institute of Physics. 2018. 020031. (AIP conference proceedings). https://doi.org/10.1063/1.5034832