Design and Implementation of a Flexible Interface for TID Detector

I. Fara; L.M. Luza; J. Boch; G. Furano; M. Ottavi; L. Dilillo

doi:10.1109/IWASI.2019.8791299

Design and Implementation of a Flexible Interface for TID Detector

I. Fara, L.M. Luza, J. Boch, G. Furano, M. Ottavi, L. Dilillo

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

1 Citation (Scopus)

Abstract

This paper introduces a flexible sensor interface for a radiation Total Ionizing Dose (TID) monitor. The board is conceived to be flexible and could be used with several detectors, the results reported in this work are based on the radiation-induced shift of the threshold voltage of a FET transistor that is polarized by current The system has been tested for a range of radiation in Co60 facility up to about 5 krad, which corresponds to the double of the TID that will face the Cubesat MTCUBE for a two-year nominal mission in a low orbit.

Original language	English
Title of host publication	Proceedings - 2019 8th International Workshop on Advances in Sensors and Interfaces, IWASI 2019
DOIs	https://doi.org/10.1109/IWASI.2019.8791299
Publication status	Published - 2019
Externally published	Yes
Event	8th International Workshop on Advances in Sensors and Interfaces, IWASI 2019 - Otranto, Italy Duration: 13 Jun 2019 → 14 Jun 2019 Conference number: 8

Conference

Conference	8th International Workshop on Advances in Sensors and Interfaces, IWASI 2019
Abbreviated title	IWASI 2019
Country/Territory	Italy
City	Otranto
Period	13/06/19 → 14/06/19

Access to Document

10.1109/IWASI.2019.8791299

Cite this

@inproceedings{b0886a32369d455395d14483984a4599,

title = "Design and Implementation of a Flexible Interface for TID Detector",

abstract = "This paper introduces a flexible sensor interface for a radiation Total Ionizing Dose (TID) monitor. The board is conceived to be flexible and could be used with several detectors, the results reported in this work are based on the radiation-induced shift of the threshold voltage of a FET transistor that is polarized by current The system has been tested for a range of radiation in Co60 facility up to about 5 krad, which corresponds to the double of the TID that will face the Cubesat MTCUBE for a two-year nominal mission in a low orbit.",

author = "I. Fara and L.M. Luza and J. Boch and G. Furano and M. Ottavi and L. Dilillo",

year = "2019",

doi = "10.1109/IWASI.2019.8791299",

language = "English",

booktitle = "Proceedings - 2019 8th International Workshop on Advances in Sensors and Interfaces, IWASI 2019",

note = "8th International Workshop on Advances in Sensors and Interfaces, IWASI 2019, IWASI 2019 ; Conference date: 13-06-2019 Through 14-06-2019",

}

Fara, I, Luza, LM, Boch, J, Furano, G, Ottavi, M & Dilillo, L 2019, Design and Implementation of a Flexible Interface for TID Detector. in Proceedings - 2019 8th International Workshop on Advances in Sensors and Interfaces, IWASI 2019. 8th International Workshop on Advances in Sensors and Interfaces, IWASI 2019, Otranto, Italy, 13/06/19. https://doi.org/10.1109/IWASI.2019.8791299

TY - GEN

T1 - Design and Implementation of a Flexible Interface for TID Detector

AU - Fara, I.

AU - Luza, L.M.

AU - Boch, J.

AU - Furano, G.

AU - Ottavi, M.

AU - Dilillo, L.

N1 - Conference code: 8

PY - 2019

Y1 - 2019

N2 - This paper introduces a flexible sensor interface for a radiation Total Ionizing Dose (TID) monitor. The board is conceived to be flexible and could be used with several detectors, the results reported in this work are based on the radiation-induced shift of the threshold voltage of a FET transistor that is polarized by current The system has been tested for a range of radiation in Co60 facility up to about 5 krad, which corresponds to the double of the TID that will face the Cubesat MTCUBE for a two-year nominal mission in a low orbit.

AB - This paper introduces a flexible sensor interface for a radiation Total Ionizing Dose (TID) monitor. The board is conceived to be flexible and could be used with several detectors, the results reported in this work are based on the radiation-induced shift of the threshold voltage of a FET transistor that is polarized by current The system has been tested for a range of radiation in Co60 facility up to about 5 krad, which corresponds to the double of the TID that will face the Cubesat MTCUBE for a two-year nominal mission in a low orbit.

UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-85071491992&partnerID=MN8TOARS

U2 - 10.1109/IWASI.2019.8791299

DO - 10.1109/IWASI.2019.8791299

M3 - Conference contribution

BT - Proceedings - 2019 8th International Workshop on Advances in Sensors and Interfaces, IWASI 2019

T2 - 8th International Workshop on Advances in Sensors and Interfaces, IWASI 2019

Y2 - 13 June 2019 through 14 June 2019

ER -

Design and Implementation of a Flexible Interface for TID Detector

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Cite this