Development of a pressure based incompressible flow solver for wind turbine applications

Akshay Koodly Ravishankara

Research output: ThesisPhD Thesis - Research UT, graduation UT

231 Downloads (Pure)


Wind turbine aerodynamics spans a wide range of scales starting from the millimeter thick boundary layers up to atmospheric flows. Analysis of each of these scales have traditionally been performed using simplified or ’engineering’ models. However, with simplifications also come uncertainties. In order to reduce the uncertainties and also to improve the design process, more accurate analysis tools are necessary. Computational Fluid Dynamics (CFD) based methods are being used to fill this need. This thesis presents the development and application of an incompressible pressure based solver. The new solver has been developed within the framework of SU2, an open source collection of C++ based software tools for multi-physics analysis.
Wind turbines operate under "incompressible" conditions and the CFD methods are based on solving the Navier-Stokes equations in the incompressible form. The main difficulty in solving the incompressible Navier-Stokes equations lies in resolving the pressure velocity coupling. Various approaches have been proposed over the years to overcome this difficulty and in this work the SIMPLE algorithm is used. The common link among all the approaches to resolve the pressure velocity coupling was the use of staggered grids, where pressure and velocities are stored at cell centers and cell faces respectively. The staggered grid comes with its own disadvantages, especially for modern day industrial problems. A momentum based interpolation technique is used to allow for the SIMPLE algorithm to be applied on collocated grids. The effect of turbulence is modeled using the eddy viscosity based Spalart-Allmaras (SA) and the k-ω Shear Stress Transport (SST) models. Verification of the new solver is carried out using Couette flow problems where analytical solutions to the Navier-Stokes equations can be found. Validation of the new solver is carried out using widely studied problems like flow over a flat plate, backward facing steps and cylinder.
CFD is used for a wide variety of problems in the wind turbine industry. Three such problems are studied in this work. First, the effect of vortex generators on the boundary layer is presented. Integral boundary layer (IBL) based methods are used extensively for quick and accurate analysis of airfoil performance. The effect of vortex generators on the boundary layer is analyzed using the mixing layer theory as a first step towards modeling vortex generators in IBL methods. Another issue gaining importance recently is the effect of leading edge erosion. As the blade surface is exposed to the elements continuously, it is prone to erosion which leads to a reduction in performance. A roughness model is implemented and used to analyze the effect of erosion on aerodynamic performance and boundary layer behavior. Finally, the new solver is used to study the flow past a rotating wind turbine blade.
Original languageEnglish
QualificationDoctor of Philosophy
Awarding Institution
  • University of Twente
  • Venner, Cornelis H., Supervisor
  • van der Weide, Edwin, Co-Supervisor
  • Ozdemir, Huseyin, Co-Supervisor
Award date6 Oct 2021
Place of PublicationEnschede
Print ISBNs978-90-365-5255-4
Publication statusPublished - Oct 2021

Cite this