E/E-product data management in consideration of model-based systems engineering

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3 Citations (Scopus)
18 Downloads (Pure)

Abstract

This paper presents objectives for permeable electric/electronics product data management for mechatronic products in consideration of model-based systems engineering from the early product development phase till a lifecycle management. Idiosyncrasies of mechatronic products, requirements engineering, model-based systems engineering, artifact-orientation, and interconnections of artifacts are evaluated and postulate objectives, how artifacts have to be designed in order to support the linkage of model-based systems engineering and product data management (PDM). The objectives, derived from the different theories and requirements to foster permeable PDM, are: i) Identify all existing norms for the development of mechanical, electronic, and software aspects and elaborate how information artifacts have to be defined. ii) (Textual) Requirements have to be technically feasible to be linked to information artifacts and system models already in the early development phase. iii) System models have to be aligned to information artifacts from the models' creation onwards and standardization in exchange formats has to be ensured. iv) Information artifacts with own lifecycles shall alleviate PDM in the early product development phase. v) Interconnections shall ameliorate associativity through capturing process information between single artifacts. A first concept is presented, visualizing the aforementioned objectives and their contribution in the early development process of mechatronic products, how a permeable PDM might be achieved.

Original languageEnglish
Title of host publicationTransdisciplinary Engineering: Crossing Boundaries - Proceedings of the 23rd ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2016
PublisherIOS Press
Pages289-298
Number of pages10
Volume4
ISBN (Electronic)9781614997023
DOIs
Publication statusPublished - 2016
Event23rd ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2016 - Curitiba, Brazil
Duration: 3 Oct 20167 Oct 2016
Conference number: 23

Conference

Conference23rd ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2016
Abbreviated titleTE 2016
CountryBrazil
CityCuritiba
Period3/10/167/10/16

Fingerprint

Systems Engineering
Data Management
Systems engineering
Information management
Model-based
Mechatronics
Product development
Product Development
Interconnection
Life Cycle
Requirements engineering
Electronics
Standardization
Associativity
Requirements Engineering
Product data management
Requirements
Postulate
Electronic equipment
Development Process

Keywords

  • Electric/Electronics
  • Interconnections
  • Mechatronics
  • Model-Based Systems Engineering
  • Permeable Product Data Management
  • Requirements Engineering

Cite this

Groll, M. W., & Heber, D. (2016). E/E-product data management in consideration of model-based systems engineering. In Transdisciplinary Engineering: Crossing Boundaries - Proceedings of the 23rd ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2016 (Vol. 4, pp. 289-298). IOS Press. https://doi.org/10.3233/978-1-61499-703-0-289
Groll, Marco W. ; Heber, Dominik. / E/E-product data management in consideration of model-based systems engineering. Transdisciplinary Engineering: Crossing Boundaries - Proceedings of the 23rd ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2016. Vol. 4 IOS Press, 2016. pp. 289-298
@inproceedings{a927a36c245542049b9b5db05429098f,
title = "E/E-product data management in consideration of model-based systems engineering",
abstract = "This paper presents objectives for permeable electric/electronics product data management for mechatronic products in consideration of model-based systems engineering from the early product development phase till a lifecycle management. Idiosyncrasies of mechatronic products, requirements engineering, model-based systems engineering, artifact-orientation, and interconnections of artifacts are evaluated and postulate objectives, how artifacts have to be designed in order to support the linkage of model-based systems engineering and product data management (PDM). The objectives, derived from the different theories and requirements to foster permeable PDM, are: i) Identify all existing norms for the development of mechanical, electronic, and software aspects and elaborate how information artifacts have to be defined. ii) (Textual) Requirements have to be technically feasible to be linked to information artifacts and system models already in the early development phase. iii) System models have to be aligned to information artifacts from the models' creation onwards and standardization in exchange formats has to be ensured. iv) Information artifacts with own lifecycles shall alleviate PDM in the early product development phase. v) Interconnections shall ameliorate associativity through capturing process information between single artifacts. A first concept is presented, visualizing the aforementioned objectives and their contribution in the early development process of mechatronic products, how a permeable PDM might be achieved.",
keywords = "Electric/Electronics, Interconnections, Mechatronics, Model-Based Systems Engineering, Permeable Product Data Management, Requirements Engineering",
author = "Groll, {Marco W.} and Dominik Heber",
year = "2016",
doi = "10.3233/978-1-61499-703-0-289",
language = "English",
volume = "4",
pages = "289--298",
booktitle = "Transdisciplinary Engineering: Crossing Boundaries - Proceedings of the 23rd ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2016",
publisher = "IOS Press",
address = "Netherlands",

}

Groll, MW & Heber, D 2016, E/E-product data management in consideration of model-based systems engineering. in Transdisciplinary Engineering: Crossing Boundaries - Proceedings of the 23rd ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2016. vol. 4, IOS Press, pp. 289-298, 23rd ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2016, Curitiba, Brazil, 3/10/16. https://doi.org/10.3233/978-1-61499-703-0-289

E/E-product data management in consideration of model-based systems engineering. / Groll, Marco W.; Heber, Dominik.

Transdisciplinary Engineering: Crossing Boundaries - Proceedings of the 23rd ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2016. Vol. 4 IOS Press, 2016. p. 289-298.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

TY - GEN

T1 - E/E-product data management in consideration of model-based systems engineering

AU - Groll, Marco W.

AU - Heber, Dominik

PY - 2016

Y1 - 2016

N2 - This paper presents objectives for permeable electric/electronics product data management for mechatronic products in consideration of model-based systems engineering from the early product development phase till a lifecycle management. Idiosyncrasies of mechatronic products, requirements engineering, model-based systems engineering, artifact-orientation, and interconnections of artifacts are evaluated and postulate objectives, how artifacts have to be designed in order to support the linkage of model-based systems engineering and product data management (PDM). The objectives, derived from the different theories and requirements to foster permeable PDM, are: i) Identify all existing norms for the development of mechanical, electronic, and software aspects and elaborate how information artifacts have to be defined. ii) (Textual) Requirements have to be technically feasible to be linked to information artifacts and system models already in the early development phase. iii) System models have to be aligned to information artifacts from the models' creation onwards and standardization in exchange formats has to be ensured. iv) Information artifacts with own lifecycles shall alleviate PDM in the early product development phase. v) Interconnections shall ameliorate associativity through capturing process information between single artifacts. A first concept is presented, visualizing the aforementioned objectives and their contribution in the early development process of mechatronic products, how a permeable PDM might be achieved.

AB - This paper presents objectives for permeable electric/electronics product data management for mechatronic products in consideration of model-based systems engineering from the early product development phase till a lifecycle management. Idiosyncrasies of mechatronic products, requirements engineering, model-based systems engineering, artifact-orientation, and interconnections of artifacts are evaluated and postulate objectives, how artifacts have to be designed in order to support the linkage of model-based systems engineering and product data management (PDM). The objectives, derived from the different theories and requirements to foster permeable PDM, are: i) Identify all existing norms for the development of mechanical, electronic, and software aspects and elaborate how information artifacts have to be defined. ii) (Textual) Requirements have to be technically feasible to be linked to information artifacts and system models already in the early development phase. iii) System models have to be aligned to information artifacts from the models' creation onwards and standardization in exchange formats has to be ensured. iv) Information artifacts with own lifecycles shall alleviate PDM in the early product development phase. v) Interconnections shall ameliorate associativity through capturing process information between single artifacts. A first concept is presented, visualizing the aforementioned objectives and their contribution in the early development process of mechatronic products, how a permeable PDM might be achieved.

KW - Electric/Electronics

KW - Interconnections

KW - Mechatronics

KW - Model-Based Systems Engineering

KW - Permeable Product Data Management

KW - Requirements Engineering

UR - http://www.scopus.com/inward/record.url?scp=84993933905&partnerID=8YFLogxK

U2 - 10.3233/978-1-61499-703-0-289

DO - 10.3233/978-1-61499-703-0-289

M3 - Conference contribution

VL - 4

SP - 289

EP - 298

BT - Transdisciplinary Engineering: Crossing Boundaries - Proceedings of the 23rd ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2016

PB - IOS Press

ER -

Groll MW, Heber D. E/E-product data management in consideration of model-based systems engineering. In Transdisciplinary Engineering: Crossing Boundaries - Proceedings of the 23rd ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2016. Vol. 4. IOS Press. 2016. p. 289-298 https://doi.org/10.3233/978-1-61499-703-0-289