Effect of microfluidic processing on the viability of boar and bull spermatozoa

Tanja Hamacher*, Johanna T.W. Berendsen, Stella A. Kruit, Marleen L.W.J. Broekhuijse, Loes I. Segerink

*Corresponding author for this work

Research output: Contribution to journalArticleAcademicpeer-review

31 Downloads (Pure)

Abstract

The use of microfluidics in artificial reproductive technologies for manipulation or assessment of spermatozoa is unique in the sense that it is not always an end point measurement and the sample may be used afterward. During microfluidic processing, spermatozoa are exposed to shear stress, which may harm viability and functioning of spermatozoa. The shear stresses during general microfluidic processing steps were calculated and compared to estimated shear stresses during ejaculation. The viability of boar and bull spermatozoa after microfluidic processing was studied and compared to the typical handling method (centrifugation) and to a control (the sample in a tube at the same temperature). The boar spermatozoa showed a small but significant decrease in viability of 6% after microfluidic handling. Bull spermatozoa proved to be less susceptible to shear stress and were not significantly affected by microfluidic processing. These data indicate that the impact of microfluidic processing on the viability of boar and bull spermatozoa is less than the literature values reported for flow cytometry and comparable to the impact of centrifugation
Original languageEnglish
Article number044111
JournalBiomicrofluidics
Volume14
Issue number4
DOIs
Publication statusPublished - 3 Aug 2020

Fingerprint

Dive into the research topics of 'Effect of microfluidic processing on the viability of boar and bull spermatozoa'. Together they form a unique fingerprint.

Cite this