Effect of Particle Size and Cohesion on Powder Yielding and Flow

Hao Shi (Corresponding Author), Rahul Mohanty, Somik Chakravarty, Ramon Cabiscol, Martin Morgeneyer, Harald Zetzener, Jin Y. Ooi, Arno Kwade, Stefan Luding, Vanessa Magnanimo

    Research output: Contribution to journalArticleAcademicpeer-review

    51 Citations (Scopus)
    922 Downloads (Pure)


    The bulk properties of powders depend on material characteristics and size of the primary particles. During storage and transportation processes in the powder processing industry, the material undergoes various modes of deformation and stress conditions, e.g., due to compression or shear. In many applications, it is important to know when powders are yielding, i.e. when they start to flow under shear; in other cases it is necessary to know how much stress is needed to keep them flowing. The measurement of powder yield and flow properties is still a challenge and will be addressed in this study.
    In the framework of the collaborative project T-MAPPP, a large set of shear experiments using different shear devices, namely the Jenike shear tester, the ELE direct shear tester, the Schulze ring shear tester and the FT4 powder rheometer, have been carried out on eight chemically-identical limestone powders of different particle sizes in a wide range of confining stresses. These experiments serve two goals: i) to test the reproducibility/consistency among different shear devices and testing protocols; ii) to relate the bulk behaviour to microscopic particle properties, focusing on the effect of particle size and thus inter-particle cohesion.
    The experiments show high repeatability for all shear devices, though some of them show more fluctuations than others. All devices provide consistent results, where the FT4 powder rheometer gives lower yield/steady state stress values, due to a different pre-shearing protocol. As expected, the bulk cohesion decreases with increasing particle size (up to 150 μm), due to the decrease of inter-particle cohesion. The bulk friction, characterized in different ways, is following a similar decreasing trend, whereas the bulk density increases with particle size in this range. Interestingly, for samples with particle sizes larger than 150 μm, the bulk cohesion increases slightly, while the bulk friction increases considerably—presumably due to particle interlocking effects—up to magnitudes comparable to those of the finest powders. Furthermore, removing the fines from the coarse powder samples reduces the bulk cohesion and bulk density, but has a negligible effect on the bulk friction.
    In addition to providing useful insights into the role of microscopically attractive, van der Waals, gravitational and/or compressive forces for the macroscopic bulk powder flow behaviour, the experimental data provide a robust database of cohesive and frictional fine powders for industrially relevant designs such as silos, as well as for calibration and validation of models and computer simulations.
    Original languageEnglish
    Article number2018014
    Pages (from-to)226-250
    Number of pages25
    Issue number35
    Early online date23 Sep 2017
    Publication statusPublished - 10 Jan 2018


    • Cohesive powders
    • Shear testers
    • Yield locus
    • Bulk friction
    • Bulk cohesion
    • Particle size effect
    • T-MAPPP
    • Database


    Dive into the research topics of 'Effect of Particle Size and Cohesion on Powder Yielding and Flow'. Together they form a unique fingerprint.

    Cite this