Electro Optic Modulation In a Polymer Ringresonator

A. Leinse, A. Driessen, M.B.J. Diemeer

    Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

    1 Citation (Scopus)
    70 Downloads (Pure)

    Abstract

    A thermo optic and electro optic (EO) tunable polymer ringresonator was realized and tested. The device consisted of a microring resonator made of the 4‐dimethylamino‐4‵‐nitrostilbene (DANS) containing polymer and measurements were done on the through port of this device. The ring was used in a vertical coupling structure. The port waveguides were made of the photo‐definable epoxy (SU8). The rings used had a diameter of 100 μm and thermo optic tuning of about 170 pm/°C was measured. EO modulation was measured for TE polarization.
    Original languageEnglish
    Title of host publicationMicroresonators As Building Blocks For VLSI Photonics
    Subtitle of host publicationInternational School of Quantum Electronics, 39th Course
    EditorsFrancesco Michelotti, Alfred Driessen, Mario Bertolotti
    Place of PublicationMelville, NY, USA
    PublisherAmerican Institute of Physics
    Pages421-422
    Number of pages2
    ISBN (Print)0-7354-0184-5
    DOIs
    Publication statusPublished - 18 Oct 2004
    EventMicroresonators as building blocks for VLSI photonics 2003
    : 39th Course International School of Quantum Electronics
    - Erice, Italy
    Duration: 18 Oct 200325 Oct 2003

    Publication series

    NameAIP Conference Proceedings
    PublisherAIP
    Volume709
    ISSN (Print)0094-243X

    Conference

    ConferenceMicroresonators as building blocks for VLSI photonics 2003
    CountryItaly
    CityErice
    Period18/10/0325/10/03

    Fingerprint

    Dive into the research topics of 'Electro Optic Modulation In a Polymer Ringresonator'. Together they form a unique fingerprint.

    Cite this