Experimental non-linear modal testing of an aircraft engine casing assembly

Dario Di Maio*, Paul Bennett, Christoph Schwingshackl, David J. Ewins

*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

6 Citations (Scopus)

Abstract

This paper aims to present experimental work on an aircraft engine casing assembly. Nowadays single components of casings can be modeled with such high accuracy that they can be validated by carrying out the model validation process using measured data from a sector of the entire assembly. This smart validation process can be achieved by carrying out the modal analysis with a Scanning LDV (Laser Doppler Vibrometer) system which allows good spatial resolution of the measured mode shapes. The validation process can be assumed valid under linear response conditions obtainable for low vibration amplitudes. Casings are typically connected together by joints which may or may not respond non-linearly under high levels of vibration. Therefore, prior to conducting any non-linear validation, the mode(s) responding non-linearly must be identified beforehand in order to correctly specify the non-linear modal testing required. The work presented here will use a large civil engine casing assembly comprising a Combustion Chamber Outer Casing (CCOC), High Intermediate Pressure Turbine Casing (HIPTC) and Low Pressure Turbine Casing (LPTC.) The Fine Mesh Finite Element Model (FMFEM) was successfully validated using linear modal analysis test data. One of the objectives of this work is to define the key points for conducting non-linear modal testing of such large casing assemblies and sub-assemblies. One outcome of the experimental work was a set of recommendations for performing measurements, which should be carried out within the frequency bandwidth selected during the model validation process. Experimentally derived non-linear response curves arc presented in this paper.

Original languageEnglish
Title of host publicationTopics in Nonlinear Dynamics - Proceedings of the 31st IMAC, A Conference on Structural Dynamics, 2013
Pages15-36
Number of pages22
DOIs
Publication statusPublished - 2013
Externally publishedYes
Event31st Conference on Structural Dynamics, IMAC 2013 - Garden Grove, United States
Duration: 11 Feb 201314 Feb 2013
Conference number: 31

Publication series

NameConference Proceedings of the Society for Experimental Mechanics Series
Volume1
ISSN (Print)2191-5644
ISSN (Electronic)2191-5652

Conference

Conference31st Conference on Structural Dynamics, IMAC 2013
Abbreviated titleIMAC 2013
CountryUnited States
CityGarden Grove
Period11/02/1314/02/13

Keywords

  • Aircraft engine casing
  • Joints
  • Non-linear testing
  • Scanning LDV

Fingerprint Dive into the research topics of 'Experimental non-linear modal testing of an aircraft engine casing assembly'. Together they form a unique fingerprint.

Cite this