Experimental validation of numerical sensitivities in a deep drawing simulation

A.H. van den Boogaard; B.D. Carleer; E.H. Atzema; E.V. ter Wijlen

doi:10.1007/s12289-008-0051-y

Experimental validation of numerical sensitivities in a deep drawing simulation

A.H. van den Boogaard^*, B.D. Carleer, E.H. Atzema, E.V. ter Wijlen

^*Corresponding author for this work

Faculty of Engineering Technology

Research output: Contribution to journal › Conference article › Academic

3 Citations (Scopus)

160 Downloads (Pure)

Abstract

Deep drawing of a benchmark B-pillar is numerically modelled and experimentally performed with varying blankholder force and several blank shape parameters. The most influential parameters are selected for optimisation. Direct application of Autoform sigma software was used to determine sensitivities, as well as indirect application using response surfaces. Interesting nonlinear sensitivities were found that will be missed with simple linear screening techniques

Original language	English
Pages (from-to)	41–44
Number of pages	4
Journal	International journal of material forming
Volume	1
Issue number	Suppl.
DOIs	https://doi.org/10.1007/s12289-008-0051-y
Publication status	Published - 2008
Event	11th International ESAFORM Conference on Materials Forming, ESAFORM 2008 - Lyon, France Duration: 23 Apr 2008 → 25 Apr 2008 Conference number: 11

Keywords

2023 OA procedure

Access to Document

10.1007/s12289-008-0051-y

ArticleFinal published version, 757 KBLicence: Taverne

3 Citations
1 Conference contribution

Experimental validation of numerical sensitivities in a deep drawing simulation
van den Boogaard, A. H., Carleer, B. D., Atzema, E. H. & ter Wijlen, E. V., 2008, Proceedings of the 11th ESAFORM Conference on Material Forming, Lyon (France), 23-25 April 2008. Boisse, P., Morestin, F. & Vidal-Sallé, E. (eds.). Lyon, France: Springer, 4 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access
File

Cite this

@article{ca1736fdc6e24a03bf5068e50fd65928,

title = "Experimental validation of numerical sensitivities in a deep drawing simulation",

abstract = "Deep drawing of a benchmark B-pillar is numerically modelled and experimentally performed with varying blankholder force and several blank shape parameters. The most influential parameters are selected for optimisation. Direct application of Autoform sigma software was used to determine sensitivities, as well as indirect application using response surfaces. Interesting nonlinear sensitivities were found that will be missed with simple linear screening techniques",

keywords = "2023 OA procedure",

author = "{van den Boogaard}, A.H. and B.D. Carleer and E.H. Atzema and {ter Wijlen}, E.V.",

year = "2008",

doi = "10.1007/s12289-008-0051-y",

language = "English",

volume = "1",

pages = "41–44",

journal = "International journal of material forming",

issn = "1960-6206",

publisher = "Springer Paris",

number = "Suppl.",

note = "11th International ESAFORM Conference on Materials Forming, ESAFORM 2008, ESAFORM ; Conference date: 23-04-2008 Through 25-04-2008",

}

TY - JOUR

T1 - Experimental validation of numerical sensitivities in a deep drawing simulation

AU - van den Boogaard, A.H.

AU - Carleer, B.D.

AU - Atzema, E.H.

AU - ter Wijlen, E.V.

N1 - Conference code: 11

PY - 2008

Y1 - 2008

N2 - Deep drawing of a benchmark B-pillar is numerically modelled and experimentally performed with varying blankholder force and several blank shape parameters. The most influential parameters are selected for optimisation. Direct application of Autoform sigma software was used to determine sensitivities, as well as indirect application using response surfaces. Interesting nonlinear sensitivities were found that will be missed with simple linear screening techniques

AB - Deep drawing of a benchmark B-pillar is numerically modelled and experimentally performed with varying blankholder force and several blank shape parameters. The most influential parameters are selected for optimisation. Direct application of Autoform sigma software was used to determine sensitivities, as well as indirect application using response surfaces. Interesting nonlinear sensitivities were found that will be missed with simple linear screening techniques

KW - 2023 OA procedure

U2 - 10.1007/s12289-008-0051-y

DO - 10.1007/s12289-008-0051-y

M3 - Conference article

SN - 1960-6206

VL - 1

SP - 41

EP - 44

JO - International journal of material forming

JF - International journal of material forming

IS - Suppl.

T2 - 11th International ESAFORM Conference on Materials Forming, ESAFORM 2008

Y2 - 23 April 2008 through 25 April 2008

ER -

Experimental validation of numerical sensitivities in a deep drawing simulation

Abstract

Keywords

Access to Document

Fingerprint

Research output

Experimental validation of numerical sensitivities in a deep drawing simulation

Cite this