Extending the Double-Hertz Model to Allow Modeling of an Adhesive Elliptical Contract

Nurul Hilwa Binti Mohd Zini, M.B. de Rooij, M. Bazrafshan, Nurhidayah Binti Ismail, D.J. Schipper

    Research output: Contribution to journalArticleAcademicpeer-review

    6 Citations (Scopus)
    36 Downloads (Pure)


    An adhesive elliptical contact is normally found in microscale applications that involve cylindrical solids, crossing at an angle between 0° and 90°. Currently, only one model is available to describe the elliptical contact’s surface interaction: the approximate Johnson–Kendall–Roberts (JKR) model which is limited to soft materials. In this paper, a new adhesive elliptical model is developed for a wide range of adhesive contacts by extending the double-Hertz theory, where adhesion is modeled by the difference between two Hertzian pressure distributions. Both Hertzian pressures are assumed to have an equivalent shape of contact areas, the only difference being in size. Assuming that the annular adhesive region is obtained by the area difference between the two Hertzian contact areas, the pull-off force curves can be calculated. In the limiting case of an adhesive circular contact, the results are very close to results from the existing models. However, for an adhesive elliptical contact in the JKR domain, lower pull-off forces are predicted when compared to the JKR values. Unlike the developed model, the shape of the JKR contact area varies throughout contact. Results show, particularly for conditions close to the JKR domain, that it is important to take into account that the adhesive region is the result of the two Hertzian contact areas having a non-equivalent shape
    Original languageEnglish
    Pages (from-to)30
    Number of pages43
    JournalTribology letters
    Issue number1
    Publication statusPublished - 11 Jan 2018


    • UT-Hybrid-D


    Dive into the research topics of 'Extending the Double-Hertz Model to Allow Modeling of an Adhesive Elliptical Contract'. Together they form a unique fingerprint.

    Cite this