Skip to main navigation Skip to search Skip to main content

External force observer and control for a compliant 2-DOF manipulator

Research output: Contribution to journal › Article › Academic › peer-review

7 Downloads (Pure)

Abstract

Force or torque control should ensure that a manipulator exerts a predefined force on its environment. Commonly a dedicated sensor is used to measure this interaction force. In this paper it is shown that such additional sensor is not needed in a compliant manipulator with flexure joints, taking advantage of the system’s deterministic behaviour. For a 2-DOF manipulator a multibody model is derived of which the physical parameters have been experimentally identified. Using this model, the interaction force is estimated in real-time from the actuator forces and knowing the manipulator motion. This force estimation is embedded quite straightforwardly in a force control system to apply a specified force on the environment while the end-effector can move in both directions. In this way it is demonstrated that the proposed model-based force estimation is sufficiently accurate and it enables a viable concept to implement real-time force control for compliant manipulator with flexure joints without the need of an additional sensor.

Original languageEnglish
Number of pages14
JournalMultibody system dynamics
Early online date14 Nov 2025
DOIs
Publication statusE-pub ahead of print/First online - 14 Nov 2025

Keywords

  • External force observer
  • Flexure joints
  • Force control
  • Parameter estimation

Fingerprint

Dive into the research topics of 'External force observer and control for a compliant 2-DOF manipulator'. Together they form a unique fingerprint.

Cite this