Issues concerning Radio Noise floor measurements using a portable measurement set-up

Tallienco  Fockens; Frank Leferink

doi:10.1109/EMCEurope.2018.8485041

Issues concerning Radio Noise floor measurements using a portable measurement set-up

Tallienco Fockens, Frank Leferink

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

1 Citation (Scopus)

10 Downloads (Pure)

Abstract

An investigation is made into the selection of measurement antennas for man-made noise measurements. Although an ITU-R recommendation about noise measurements exists, the nature and goals of specific measurements campaigns prescribe additional requirements in the selection of antennas. Seen from points of sensitivity and calibration accuracy electric field rod antennas appeared to be suitable only for use on fixed locations in combination with a low impedance grounding. For portable measurement set-ups tuned magnetic field loop antennas are more applicable, but sensitivity and directivity of loop antennas require suitable measures.

Original language	English
Title of host publication	EMC Europe 2018 - 2018 International Symposium on Electromagnetic Compatibility
Publisher	IEEE
Pages	349-354
Number of pages	6
ISBN (Electronic)	978-1-4673-9698-1
ISBN (Print)	978-1-4673-9699-8
DOIs	https://doi.org/10.1109/EMCEurope.2018.8485041
Publication status	Published - 8 Oct 2018
Event	EMC EUROPE 2018: International Symposium on Electromagnetic Compatibility - Beurs van Berlage, Amsterdam, Netherlands Duration: 27 Aug 2018 → 30 Aug 2018 https://www.emceurope2018.org/

Conference

Conference	EMC EUROPE 2018
Abbreviated title	EMC EUROPE
Country/Territory	Netherlands
City	Amsterdam
Period	27/08/18 → 30/08/18
Internet address	https://www.emceurope2018.org/

Access to Document

10.1109/EMCEurope.2018.8485041

Cite this

@inproceedings{95a58fe5f6674e7697f1783998c9c2b2,

title = "Issues concerning Radio Noise floor measurements using a portable measurement set-up",

abstract = "An investigation is made into the selection of measurement antennas for man-made noise measurements. Although an ITU-R recommendation about noise measurements exists, the nature and goals of specific measurements campaigns prescribe additional requirements in the selection of antennas. Seen from points of sensitivity and calibration accuracy electric field rod antennas appeared to be suitable only for use on fixed locations in combination with a low impedance grounding. For portable measurement set-ups tuned magnetic field loop antennas are more applicable, but sensitivity and directivity of loop antennas require suitable measures.",

author = "Tallienco Fockens and Frank Leferink",

year = "2018",

month = oct,

day = "8",

doi = "10.1109/EMCEurope.2018.8485041",

language = "English",

isbn = "978-1-4673-9699-8",

pages = "349--354",

booktitle = "EMC Europe 2018 - 2018 International Symposium on Electromagnetic Compatibility",

publisher = "IEEE",

address = "United States",

note = "EMC EUROPE 2018 : International Symposium on Electromagnetic Compatibility, EMC EUROPE ; Conference date: 27-08-2018 Through 30-08-2018",

url = "https://www.emceurope2018.org/",

}

TY - GEN

T1 - Issues concerning Radio Noise floor measurements using a portable measurement set-up

AU - Fockens, Tallienco

AU - Leferink, Frank

PY - 2018/10/8

Y1 - 2018/10/8

N2 - An investigation is made into the selection of measurement antennas for man-made noise measurements. Although an ITU-R recommendation about noise measurements exists, the nature and goals of specific measurements campaigns prescribe additional requirements in the selection of antennas. Seen from points of sensitivity and calibration accuracy electric field rod antennas appeared to be suitable only for use on fixed locations in combination with a low impedance grounding. For portable measurement set-ups tuned magnetic field loop antennas are more applicable, but sensitivity and directivity of loop antennas require suitable measures.

AB - An investigation is made into the selection of measurement antennas for man-made noise measurements. Although an ITU-R recommendation about noise measurements exists, the nature and goals of specific measurements campaigns prescribe additional requirements in the selection of antennas. Seen from points of sensitivity and calibration accuracy electric field rod antennas appeared to be suitable only for use on fixed locations in combination with a low impedance grounding. For portable measurement set-ups tuned magnetic field loop antennas are more applicable, but sensitivity and directivity of loop antennas require suitable measures.

U2 - 10.1109/EMCEurope.2018.8485041

DO - 10.1109/EMCEurope.2018.8485041

M3 - Conference contribution

SN - 978-1-4673-9699-8

SP - 349

EP - 354

BT - EMC Europe 2018 - 2018 International Symposium on Electromagnetic Compatibility

PB - IEEE

T2 - EMC EUROPE 2018

Y2 - 27 August 2018 through 30 August 2018

ER -

Issues concerning Radio Noise floor measurements using a portable measurement set-up

Abstract

Conference

Access to Document

Fingerprint

Cite this