Knowledge structuring and simulation modeling for product development

Juan Manuel Jauregui Becker; Wessel Willems Wits

doi:10.1016/j.procir.2012.05.030

Knowledge structuring and simulation modeling for product development

Juan Manuel Jauregui Becker, Wessel Willems Wits

Faculty of Engineering Technology

Research output: Contribution to journal › Article › Academic › peer-review

4 Citations (Scopus)

114 Downloads (Pure)

Abstract

This paper proposes a new approach based on knowledge structures for building simulation models. The target are products to be redesigned integrating new technologies. The main idea of the approach is to limit the development of an analysis model to that of the new technology and merge it into the existing prototype using the connection parameters determined at the hand of the knowledge models. This approach was implemented for the design of a next-generation system iron. The approach enabled easy collection of data and automatic model verification, demonstrating its capability to reduce complexity in product development.

Original language	English
Pages (from-to)	4-9
Journal	Procedia CIRP
Volume	2
DOIs	https://doi.org/10.1016/j.procir.2012.05.030
Publication status	Published - 2012
Event	1st CIRP Global Web Conference, CIRPe 2012: Interdisciplinary Research in Production Engineering - University of Twente, Enschede, Netherlands Duration: 12 Jun 2012 → 13 Jun 2012 Conference number: 1

Keywords

IR-84935
Simulation
METIS-292200
knowledge structures
engineering modeling

Access to Document

10.1016/j.procir.2012.05.030Licence: CC BY-NC-ND

Becker2012knowledgeFinal published version, 1.48 MBLicence: CC BY-NC-ND

Cite this

@article{cb47bd1f16b04c1b86359e0b3d3d063d,

title = "Knowledge structuring and simulation modeling for product development",

abstract = "This paper proposes a new approach based on knowledge structures for building simulation models. The target are products to be redesigned integrating new technologies. The main idea of the approach is to limit the development of an analysis model to that of the new technology and merge it into the existing prototype using the connection parameters determined at the hand of the knowledge models. This approach was implemented for the design of a next-generation system iron. The approach enabled easy collection of data and automatic model verification, demonstrating its capability to reduce complexity in product development.",

keywords = "IR-84935, Simulation, METIS-292200, knowledge structures, engineering modeling",

author = "{Jauregui Becker}, {Juan Manuel} and Wits, {Wessel Willems}",

note = "Open access. 1st CIRP Global Web Conference: Interdisciplinary Research in Production Engineering ; 1st CIRP Global Web Conference, CIRPe 2012 : Interdisciplinary Research in Production Engineering, CIRPe ; Conference date: 12-06-2012 Through 13-06-2012",

year = "2012",

doi = "10.1016/j.procir.2012.05.030",

language = "English",

volume = "2",

pages = "4--9",

journal = "Procedia CIRP",

issn = "2212-8271",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Knowledge structuring and simulation modeling for product development

AU - Jauregui Becker, Juan Manuel

AU - Wits, Wessel Willems

N1 - Conference code: 1

PY - 2012

Y1 - 2012

N2 - This paper proposes a new approach based on knowledge structures for building simulation models. The target are products to be redesigned integrating new technologies. The main idea of the approach is to limit the development of an analysis model to that of the new technology and merge it into the existing prototype using the connection parameters determined at the hand of the knowledge models. This approach was implemented for the design of a next-generation system iron. The approach enabled easy collection of data and automatic model verification, demonstrating its capability to reduce complexity in product development.

AB - This paper proposes a new approach based on knowledge structures for building simulation models. The target are products to be redesigned integrating new technologies. The main idea of the approach is to limit the development of an analysis model to that of the new technology and merge it into the existing prototype using the connection parameters determined at the hand of the knowledge models. This approach was implemented for the design of a next-generation system iron. The approach enabled easy collection of data and automatic model verification, demonstrating its capability to reduce complexity in product development.

KW - IR-84935

KW - Simulation

KW - METIS-292200

KW - knowledge structures

KW - engineering modeling

U2 - 10.1016/j.procir.2012.05.030

DO - 10.1016/j.procir.2012.05.030

M3 - Article

SN - 2212-8271

VL - 2

SP - 4

EP - 9

JO - Procedia CIRP

JF - Procedia CIRP

T2 - 1st CIRP Global Web Conference, CIRPe 2012

Y2 - 12 June 2012 through 13 June 2012

ER -

Knowledge structuring and simulation modeling for product development

Abstract

Keywords

Access to Document

Fingerprint

Cite this