Measuring the performance of underplatform dampers for turbine blades by rotating laser Doppler vibrometer

S. Zucca*, D. Di Maio, D. J. Ewins

*Corresponding author for this work

Research output: Contribution to journalArticleAcademicpeer-review

25 Citations (Scopus)

Abstract

Underplatform friction dampers are commonly used to control the vibration level of turbine blades in order to prevent high-cycle fatigue failures. Experimental validation of highly non-linear response predictions obtained from FEM bladed disk models incorporating underplatform dampers models has proved to be very difficult so as the assessment of the performance of a chosen design. In this paper, the effect of wedge-shaped underplatform dampers on the dynamics of a simple bladed disk under rotating conditions is measured and the effect of the excitation level on the UPDs performances is investigated at different number of the engine order excitation nearby resonance frequencies of the 1st blade bending modes of the system. The measurements are performed with an improved configuration of a rotating test rig, designed with a non-contact magnetic excitation and a non-contact rotating SLDV measurement system.

Original languageEnglish
Pages (from-to)269-281
Number of pages13
JournalMechanical systems and signal processing
Volume32
DOIs
Publication statusPublished - Oct 2012
Externally publishedYes

Keywords

  • Bladed disks
  • Experimental mechanics
  • Friction damping
  • Laser vibrometry
  • Non-linear dynamics
  • Underplatform dampers

Fingerprint Dive into the research topics of 'Measuring the performance of underplatform dampers for turbine blades by rotating laser Doppler vibrometer'. Together they form a unique fingerprint.

Cite this