Multi-Band linear chirp generation based on a type-III PLL

J. Velner; Eric A.M. Klumperink; Bram Nauta; Frank Edward van Vliet

doi:10.1109/MWSYM.2013.6697485

Multi-Band linear chirp generation based on a type-III PLL

J. Velner, Eric A.M. Klumperink, Bram Nauta, Frank Edward van Vliet

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

5 Citations (Scopus)

673 Downloads (Pure)

Abstract

A type-III PLL is used to generate linear frequency ramps with 386 kHz RMS frequency error in L-band (3088 kHz in X-band) and 10% fractional bandwidth. Pulse durations can be as low as 10 μs without performance degradation. The system covers the L-, S-, C- and X-bands. A programmable output driver delivering −17.9 to +4.9 dBm differentially is included on chip. The system is fully integrated using a 250 nm SiGe BiCMOS process.

Original language	Undefined
Title of host publication	IEEE MTT-S International Microwave Symposium Digest, IMS 2013
Place of Publication	Piscataway
Publisher	IEEE
Pages	1-4
Number of pages	4
ISBN (Print)	978-1-4673-6177-4
DOIs	https://doi.org/10.1109/MWSYM.2013.6697485
Publication status	Published - 6 Jun 2013
Event	International Microwave Symposium 2013 - Seattle, United States Duration: 2 Jun 2013 → 7 Jun 2013

Publication series

Name	IEEE - MTTS International Microwave Symposium. Digest
Publisher	IEEE
ISSN (Print)	0149-645X

Conference

Conference	International Microwave Symposium 2013
Abbreviated title	IMS 2013
Country/Territory	United States
City	Seattle
Period	2/06/13 → 7/06/13

Keywords

EWI-24303
METIS-302639
IR-88765

Access to Document

10.1109/MWSYM.2013.6697485

Velner_IMS_2013_SeattleAccepted author version, 603 KB

Cite this

@inproceedings{9ec8d3c4746547beb39b2270ca451fdc,

title = "Multi-Band linear chirp generation based on a type-III PLL",

abstract = "A type-III PLL is used to generate linear frequency ramps with 386 kHz RMS frequency error in L-band (3088 kHz in X-band) and 10% fractional bandwidth. Pulse durations can be as low as 10 μs without performance degradation. The system covers the L-, S-, C- and X-bands. A programmable output driver delivering −17.9 to +4.9 dBm differentially is included on chip. The system is fully integrated using a 250 nm SiGe BiCMOS process.",

keywords = "EWI-24303, METIS-302639, IR-88765",

author = "J. Velner and Klumperink, {Eric A.M.} and Bram Nauta and {van Vliet}, {Frank Edward}",

note = "10.1109/MWSYM.2013.6697485 ; International Microwave Symposium 2013 ; Conference date: 02-06-2013 Through 07-06-2013",

year = "2013",

month = jun,

day = "6",

doi = "10.1109/MWSYM.2013.6697485",

language = "Undefined",

isbn = "978-1-4673-6177-4",

series = "IEEE - MTTS International Microwave Symposium. Digest ",

publisher = "IEEE",

pages = "1--4",

booktitle = "IEEE MTT-S International Microwave Symposium Digest, IMS 2013",

address = "United States",

}

Velner, J, Klumperink, EAM , Nauta, B & van Vliet, FE 2013, Multi-Band linear chirp generation based on a type-III PLL. in IEEE MTT-S International Microwave Symposium Digest, IMS 2013. IEEE - MTTS International Microwave Symposium. Digest , IEEE, Piscataway, pp. 1-4, International Microwave Symposium 2013, Seattle, Washington, United States, 2/06/13. https://doi.org/10.1109/MWSYM.2013.6697485

Multi-Band linear chirp generation based on a type-III PLL. / Velner, J.; Klumperink, Eric A.M.; Nauta, Bram et al.
IEEE MTT-S International Microwave Symposium Digest, IMS 2013. Piscataway: IEEE, 2013. p. 1-4 (IEEE - MTTS International Microwave Symposium. Digest ).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Multi-Band linear chirp generation based on a type-III PLL

AU - Velner, J.

AU - Klumperink, Eric A.M.

AU - Nauta, Bram

AU - van Vliet, Frank Edward

N1 - 10.1109/MWSYM.2013.6697485

PY - 2013/6/6

Y1 - 2013/6/6

N2 - A type-III PLL is used to generate linear frequency ramps with 386 kHz RMS frequency error in L-band (3088 kHz in X-band) and 10% fractional bandwidth. Pulse durations can be as low as 10 μs without performance degradation. The system covers the L-, S-, C- and X-bands. A programmable output driver delivering −17.9 to +4.9 dBm differentially is included on chip. The system is fully integrated using a 250 nm SiGe BiCMOS process.

AB - A type-III PLL is used to generate linear frequency ramps with 386 kHz RMS frequency error in L-band (3088 kHz in X-band) and 10% fractional bandwidth. Pulse durations can be as low as 10 μs without performance degradation. The system covers the L-, S-, C- and X-bands. A programmable output driver delivering −17.9 to +4.9 dBm differentially is included on chip. The system is fully integrated using a 250 nm SiGe BiCMOS process.

KW - EWI-24303

KW - METIS-302639

KW - IR-88765

U2 - 10.1109/MWSYM.2013.6697485

DO - 10.1109/MWSYM.2013.6697485

M3 - Conference contribution

SN - 978-1-4673-6177-4

T3 - IEEE - MTTS International Microwave Symposium. Digest

SP - 1

EP - 4

BT - IEEE MTT-S International Microwave Symposium Digest, IMS 2013

PB - IEEE

CY - Piscataway

T2 - International Microwave Symposium 2013

Y2 - 2 June 2013 through 7 June 2013

ER -