One-step sculpting of silicon microstructures from pilars to needles for water and oil repelling surfaces

Research output: Contribution to journalArticleAcademicpeer-review

19 Citations (Scopus)

Abstract

Surfaces that repel both water and oil effectively (contact angles > 150°) are rare. Here we detail the microfabrication method of silicon surfaces with such properties. The method is based on careful tuning of the process conditions in a reactive etching protocol. We investigate the influence of SF6, O2 and CHF3 gases during the etching process using the same pitch of a photolithographic mask. Varying the loading conditions during etching, we optimized the conditions to fabricate homogeneous pedestal-like structures. The roughness of the microstructures could also effectively be controlled by tuning the dry plasma etching conditions. The wetting behavior of the resulting microstructures was evaluated in terms of the water and oil contact angles. Excitingly, the surfaces can be engineered from superhydrophobic to omniphobic by variation of the aforementioned predefined parameters
Original languageEnglish
Article number025004
Pages (from-to)1-6
Number of pages6
JournalJournal of micromechanics and microengineering
Volume23
Issue number2
DOIs
Publication statusPublished - 21 Dec 2013

Keywords

  • METIS-292151
  • IR-82911

Fingerprint Dive into the research topics of 'One-step sculpting of silicon microstructures from pilars to needles for water and oil repelling surfaces'. Together they form a unique fingerprint.

  • Cite this