Optimization of partial slip surface at lubricated-MEM

Mohammad Tauviqirrahman, M. Tauviqirrahman, R. Ismail, Rifky Ismail, Jamari Jamari, Dirk J. Schipper

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

1 Citation (Scopus)

Abstract

This work reports the hydrodynamic performance (load support, friction force, friction coefficient, and volume flow) generated by a partial slip surface at lubricated-MEMS. The partial slip surface is optimized so that a maximum hydrodynamic load support could be obtained. The partial slip is applied on the stationary surface, the moving surface, and both of them. It is found that if the moving surface is designed as a partial slip surface, the system is in an unsteady state and no great importance exists in engineering applications. Controlling the partial slip surface of the stationary surface can give many advanced properties compared with the traditional no-slip contact, i.e., a large fluid load support in combination with low friction coefficient. It is also shown that partial slip surface gives the highest hydrodynamic pressure in a parallel slip gap, which is helpful to improve the operation stability of the system
Original languageUndefined
Title of host publicationProceeding of 2011 2nd International Conference on Instrumentation, Control and Automation
EditorsDr. Suprijanto
Place of PublicationBandung, Indonesia
PublisherIEEE
Pages375-379
ISBN (Print)978-1-4577-1460-3
DOIs
Publication statusPublished - 15 Nov 2011

Publication series

NameIEEE Catalog Number: CFP1179P-DVD
PublisherIEEE

Keywords

  • METIS-284376
  • IR-80428

Cite this