Optimizing a steam-methane reformer for hydrogen production

M. de Jong, A.H.M.E. Reinders*, J.B.W. Kok, G. Westendorp

*Corresponding author for this work

Research output: Contribution to journalArticleAcademicpeer-review

44 Citations (Scopus)
1354 Downloads (Pure)

Abstract

By means of steam reforming, natural gas is converted to carbon dioxide and hydrogen. The reactions take place in reactor tubes which are covered with catalyst at the inside, where the reactive mixture flows. At the outside they are heated by combustion of natural gas with air. In this paper the conversion process is modeled for a single reactor tube by both chemical reaction models and heat transfer models. The model yields data of temperature, heat transfer and concentrations of hydrogen, carbon monoxide and natural gas along a reactor tube. Simulated temperatures have been validated with measured data from a prototype reformer. Next, the model was used to evaluate the performance of the reformer for six design modifications. It was found that the most promising improvements are created by increasing the air fraction in the burner and the thickness of the insulation shield.
Original languageEnglish
Pages (from-to)285-292
JournalInternational journal of hydrogen energy
Volume34
Issue number1
DOIs
Publication statusPublished - 2009

Keywords

  • Hydrogen production
  • Reforming
  • Natural gas
  • Lumped parameter model
  • 22/4 OA procedure

Fingerprint

Dive into the research topics of 'Optimizing a steam-methane reformer for hydrogen production'. Together they form a unique fingerprint.

Cite this