Probabilistic thermo-chemical anlaysis of a pultruded composite rod

Ismet Baran, Cem C. Tutum, Jesper H. Hattel

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

14 Citations (Scopus)
15 Downloads (Pure)


In the present study the deterministic thermo-chemical pultrusion simulation of a composite rod taken from the literature [7] is used as a validation case. The predicted centerline temperature and cure degree profiles of the rod match well with those in the literature [7] . Following the validation case, the probabilistic design of the pultrusion process, which has not been considered until now, is performed. The effect of statistical variations in the material (i.e. fiber and resin) and resin kinetic properties, as well as process parameters such as pulling speed and inlet temperature on the product quality (degree of cure) are examined by means of Monte Carlo Simulation (MCS) with Latin Hypercube Sampling (LHS) technique. The variations in the activation energy as well as the density of the resin are found to have a strong influence on the centerline degree of cure at the exit whereas the other process parameters have smaller influences. Moreover, different MCS options are examined to investigate their effects on the accuracy of the random output parameter.

Original languageEnglish
Title of host publicationECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
PublisherEuropean Conference on Composite Materials, ECCM
ISBN (Print)9788888785332
Publication statusPublished - 2012
Externally publishedYes
Event15th European Conference on Composite Materials, ECCM 2012 - Venice, Italy
Duration: 24 Jun 201228 Jun 2012
Conference number: 15


Conference15th European Conference on Composite Materials, ECCM 2012
Abbreviated titleECCM


  • Computational simulation
  • Curing
  • Probabilistic design
  • Pultrusion process

Cite this