Rapid prototyping using 3D welding

P.M. Dickens; M.S. Pridham; R. Cobb; I. Gibson; G. Dixon

Rapid prototyping using 3D welding

P.M. Dickens^*, M.S. Pridham, R. Cobb, I. Gibson, G. Dixon

^*Corresponding author for this work

Design Engineering

Research output: Contribution to conference › Paper › peer-review

182 Downloads (Pure)

Abstract

Rapid prototyping systems are based, almost exclusively on polymer, or paper materials. The dimensions of the parts produced are limited by the volume of the processing area within the machine, and parts tend to warp or distort due to shrinkage and lack of support. Also the mechanical properties of the part are restricted to those of the processable materials and thus, in many cases, required 'engineering properties' cannot be obtained

Original language	English
Number of pages	11
Publication status	Published - 1992
Event	1992 International Solid Freeform Fabrication Symposium - University of Texas, Austin, United States Duration: 3 Aug 1922 → 5 Aug 1922

Conference

Conference	1992 International Solid Freeform Fabrication Symposium
Country/Territory	United States
City	Austin
Period	3/08/22 → 5/08/22

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

Dickens1992rapidFinal published version, 1.3 MB

http://hdl.handle.net/2152/64409

Cite this

@conference{9b889afb10904901a2a1da62ee00e7ff,

title = "Rapid prototyping using 3D welding",

abstract = "Rapid prototyping systems are based, almost exclusively on polymer, or paper materials. The dimensions of the parts produced are limited by the volume of the processing area within the machine, and parts tend to warp or distort due to shrinkage and lack of support. Also the mechanical properties of the part are restricted to those of the processable materials and thus, in many cases, required 'engineering properties' cannot be obtained",

author = "P.M. Dickens and M.S. Pridham and R. Cobb and I. Gibson and G. Dixon",

year = "1992",

language = "English",

note = "1992 International Solid Freeform Fabrication Symposium ; Conference date: 03-08-1922 Through 05-08-1922",

}

TY - CONF

T1 - Rapid prototyping using 3D welding

AU - Dickens, P.M.

AU - Pridham, M.S.

AU - Cobb, R.

AU - Gibson, I.

AU - Dixon, G.

PY - 1992

Y1 - 1992

N2 - Rapid prototyping systems are based, almost exclusively on polymer, or paper materials. The dimensions of the parts produced are limited by the volume of the processing area within the machine, and parts tend to warp or distort due to shrinkage and lack of support. Also the mechanical properties of the part are restricted to those of the processable materials and thus, in many cases, required 'engineering properties' cannot be obtained

AB - Rapid prototyping systems are based, almost exclusively on polymer, or paper materials. The dimensions of the parts produced are limited by the volume of the processing area within the machine, and parts tend to warp or distort due to shrinkage and lack of support. Also the mechanical properties of the part are restricted to those of the processable materials and thus, in many cases, required 'engineering properties' cannot be obtained

M3 - Paper

T2 - 1992 International Solid Freeform Fabrication Symposium

Y2 - 3 August 1922 through 5 August 1922

ER -

Rapid prototyping using 3D welding

Abstract

Conference

UN SDGs

Access to Document

Fingerprint

Cite this