A Sensitivity Analysis on the Springback Behavior of the Unconstrained Bending Problem

Timo Meinders; A.W.A. Konter; S.E. Meijers; E.H. Atzema; H. Kappert

doi:10.3166/ijfp.9.365-402

A Sensitivity Analysis on the Springback Behavior of the Unconstrained Bending Problem

Timo Meinders, A.W.A. Konter, S.E. Meijers, E.H. Atzema, H. Kappert

Research output: Contribution to journal › Article › Academic › peer-review

202 Downloads (Pure)

Abstract

Sheet metal forming software is commonly used in the automotive and sheet metal sectors to support the design stage. However, the ability of the currently available software to accurately predict springback is limited. A sensitivity analysis of the springback behavior of a simple product is performed to gain more knowledge into the various factors contributing to the predictability of springback. The sensitivity analysis comprises both numerical and physical aspects and results are reported in this article.

Original language	English
Pages (from-to)	365-402
Journal	International journal of forming processes
Volume	9
Issue number	3
DOIs	https://doi.org/10.3166/ijfp.9.365-402
Publication status	Published - 2006

Keywords

Springback
Sensitivity analysis
Sheet metal forming

Access to Document

10.3166/ijfp.9.365-402

Meinders2006sensitivityAccepted author version, 1.27 MB

1 Conference contribution

A sensitivity analysis on the springback behavior of the unconstrained bending problem
Meinders, T., Konter, A. W. A., Meijers, S. E., Atzema, E. H. & Kappert, H., 2005, Numisheet 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Process. Smith, L. M. & Pourboghrat, A. (eds.). American Institute of Physics, p. 272-277 6 p. (AIP Conference Proceedings; vol. 778).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Cite this

@article{aefb0cb8c57f4f5abdd4e05e894ef11b,

title = "A Sensitivity Analysis on the Springback Behavior of the Unconstrained Bending Problem",

abstract = "Sheet metal forming software is commonly used in the automotive and sheet metal sectors to support the design stage. However, the ability of the currently available software to accurately predict springback is limited. A sensitivity analysis of the springback behavior of a simple product is performed to gain more knowledge into the various factors contributing to the predictability of springback. The sensitivity analysis comprises both numerical and physical aspects and results are reported in this article.",

keywords = "Springback, Sensitivity analysis, Sheet metal forming",

author = "Timo Meinders and A.W.A. Konter and S.E. Meijers and E.H. Atzema and H. Kappert",

year = "2006",

doi = "10.3166/ijfp.9.365-402",

language = "English",

volume = "9",

pages = "365--402",

journal = "International journal of forming processes",

issn = "1292-7775",

publisher = "Lavoisier",

number = "3",

}

TY - JOUR

T1 - A Sensitivity Analysis on the Springback Behavior of the Unconstrained Bending Problem

AU - Meinders, Timo

AU - Konter, A.W.A.

AU - Meijers, S.E.

AU - Atzema, E.H.

AU - Kappert, H.

PY - 2006

Y1 - 2006

N2 - Sheet metal forming software is commonly used in the automotive and sheet metal sectors to support the design stage. However, the ability of the currently available software to accurately predict springback is limited. A sensitivity analysis of the springback behavior of a simple product is performed to gain more knowledge into the various factors contributing to the predictability of springback. The sensitivity analysis comprises both numerical and physical aspects and results are reported in this article.

AB - Sheet metal forming software is commonly used in the automotive and sheet metal sectors to support the design stage. However, the ability of the currently available software to accurately predict springback is limited. A sensitivity analysis of the springback behavior of a simple product is performed to gain more knowledge into the various factors contributing to the predictability of springback. The sensitivity analysis comprises both numerical and physical aspects and results are reported in this article.

KW - Springback

KW - Sensitivity analysis

KW - Sheet metal forming

U2 - 10.3166/ijfp.9.365-402

DO - 10.3166/ijfp.9.365-402

M3 - Article

SN - 1292-7775

VL - 9

SP - 365

EP - 402

JO - International journal of forming processes

JF - International journal of forming processes

IS - 3

ER -

A Sensitivity Analysis on the Springback Behavior of the Unconstrained Bending Problem

Abstract

Keywords

Access to Document

Fingerprint

Research output

A sensitivity analysis on the springback behavior of the unconstrained bending problem

Cite this