Stress analysis of the friction contact on filled styrene butadiene rubber by a blade indentation: A numerical investigation

Budi Setiyana*, Jamari Jamari, Sugiyanto, Dirk Jan Schipper

*Corresponding author for this work

Research output: Contribution to journalConference articleAcademicpeer-review

Abstract

The occurrence of rubber abrasion is started with a crack that occurs when maximum stress exceeds the breaking stress. Investigation of the rubber friction using a blade indenter is presented numerically in this paper. The rubber analyzed was Filled Styrene Butadiene Rubber that is commonly used for tires. The analysis was performed to obtain the stress pattern and maximum stress location of the deformed rubber. Simulation results showed that the magnitude and location of the maximum stress were strongly influenced by the depth of indentation and contact surface roughness.

Original languageEnglish
Pages (from-to)293-298
Number of pages6
JournalMaterials Today: Proceedings
Volume13
DOIs
Publication statusPublished - 1 Jan 2019
Event6th International Conference on Advanced Materials Science and Technology, ICAMST 2018 - Novotel Hotel, Semarang, Semarang, Indonesia
Duration: 9 Oct 201810 Oct 2018
Conference number: 6
https://www.materialstoday.com/materials-chemistry/events/6th-intl-conf-on-adv-mats-science-and-tech-2018/

    Fingerprint

Keywords

  • Abrasion
  • Blade indenter
  • Friction
  • Rubber
  • Stress

Cite this