Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion

J. Jamari; R. Ismail; I. B. Anwar; E. Saputra; M. Tauviqirrahman; E. V.D. Heide

doi:10.1063/1.4945484

Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion

J. Jamari^*
, R. Ismail
, I. B. Anwar
, E. Saputra
, M. Tauviqirrahman
, E. V.D. Heide

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

5 Citations (Scopus)

3 Downloads (Pure)

Abstract

Tribological properties of materials used in biomedical implants will critically affect the performance of the implant. Ultra-high molecular weight polyethylene (UHMWPE) material is popular due to its great properties. Surface texturing is one of the methods to minimize friction and wear. In this study, the effect of surface texturing on the stress distribution of UHMWPE as a bearing material has been investigated for rolling motion. The study was performed by finite element analysis. Several three-dimensional surfaces were created by varying its texture. The texture consists of several cylindrical cavities for certain separation. These surfaces were then rolled by a hard ball indenter. The stress distribution due to the rolling contact for each surface was analyzed. Results show that the surface demonstrates a higher stress distribution for the lower separation between the cylindrical cavities.

Original language	English
Title of host publication	3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015
Editors	Risa Suryana, Khairurrijal, Heru Susanto, Markusdiantoro, Sutikno, Kuwat Triyana
Publisher	American Institute of Physics
ISBN (Electronic)	9780735413726
DOIs	https://doi.org/10.1063/1.4945484
Publication status	Published - 19 Apr 2016
Event	3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015 - Semarang, Indonesia Duration: 6 Oct 2015 → 7 Oct 2015 Conference number: 3

Publication series

Name	AIP Conference Proceedings
Volume	1725
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015
Abbreviated title	ICAMST
Country/Territory	Indonesia
City	Semarang
Period	6/10/15 → 7/10/15

Access to Document

10.1063/1.4945484

Cite this

Jamari, J., Ismail, R., Anwar, I. B., Saputra, E., Tauviqirrahman, M., & Heide, E. V. D. (2016). Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion. In R. Suryana, Khairurrijal, H. Susanto, Markusdiantoro, Sutikno, & K. Triyana (Eds.), 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015 Article 020030 (AIP Conference Proceedings; Vol. 1725). American Institute of Physics. https://doi.org/10.1063/1.4945484

Jamari, J. ; Ismail, R. ; Anwar, I. B. et al. / Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion. 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. editor / Risa Suryana ; Khairurrijal ; Heru Susanto ; Markusdiantoro ; Sutikno ; Kuwat Triyana. American Institute of Physics, 2016. (AIP Conference Proceedings).

@inproceedings{535bcd0870684536af9c22126f2500df,

title = "Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion",

abstract = "Tribological properties of materials used in biomedical implants will critically affect the performance of the implant. Ultra-high molecular weight polyethylene (UHMWPE) material is popular due to its great properties. Surface texturing is one of the methods to minimize friction and wear. In this study, the effect of surface texturing on the stress distribution of UHMWPE as a bearing material has been investigated for rolling motion. The study was performed by finite element analysis. Several three-dimensional surfaces were created by varying its texture. The texture consists of several cylindrical cavities for certain separation. These surfaces were then rolled by a hard ball indenter. The stress distribution due to the rolling contact for each surface was analyzed. Results show that the surface demonstrates a higher stress distribution for the lower separation between the cylindrical cavities.",

author = "J. Jamari and R. Ismail and Anwar, \{I. B.\} and E. Saputra and M. Tauviqirrahman and Heide, \{E. V.D.\}",

year = "2016",

month = apr,

day = "19",

doi = "10.1063/1.4945484",

language = "English",

series = "AIP Conference Proceedings",

publisher = "American Institute of Physics",

editor = "Risa Suryana and Khairurrijal and Heru Susanto and Markusdiantoro and Sutikno and Kuwat Triyana",

booktitle = "3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015",

address = "United States",

note = "3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015, ICAMST ; Conference date: 06-10-2015 Through 07-10-2015",

}

Jamari, J, Ismail, R, Anwar, IB, Saputra, E, Tauviqirrahman, M & Heide, EVD 2016, Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion. in R Suryana, Khairurrijal, H Susanto, Markusdiantoro, Sutikno & K Triyana (eds), 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015., 020030, AIP Conference Proceedings, vol. 1725, American Institute of Physics, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015, Semarang, Indonesia, 6/10/15. https://doi.org/10.1063/1.4945484

Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion. / Jamari, J.; Ismail, R.; Anwar, I. B. et al.
3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. ed. / Risa Suryana; Khairurrijal; Heru Susanto; Markusdiantoro; Sutikno; Kuwat Triyana. American Institute of Physics, 2016. 020030 (AIP Conference Proceedings; Vol. 1725).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

TY - GEN

T1 - Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion

AU - Jamari, J.

AU - Ismail, R.

AU - Anwar, I. B.

AU - Saputra, E.

AU - Tauviqirrahman, M.

AU - Heide, E. V.D.

N1 - Conference code: 3

PY - 2016/4/19

Y1 - 2016/4/19

N2 - Tribological properties of materials used in biomedical implants will critically affect the performance of the implant. Ultra-high molecular weight polyethylene (UHMWPE) material is popular due to its great properties. Surface texturing is one of the methods to minimize friction and wear. In this study, the effect of surface texturing on the stress distribution of UHMWPE as a bearing material has been investigated for rolling motion. The study was performed by finite element analysis. Several three-dimensional surfaces were created by varying its texture. The texture consists of several cylindrical cavities for certain separation. These surfaces were then rolled by a hard ball indenter. The stress distribution due to the rolling contact for each surface was analyzed. Results show that the surface demonstrates a higher stress distribution for the lower separation between the cylindrical cavities.

AB - Tribological properties of materials used in biomedical implants will critically affect the performance of the implant. Ultra-high molecular weight polyethylene (UHMWPE) material is popular due to its great properties. Surface texturing is one of the methods to minimize friction and wear. In this study, the effect of surface texturing on the stress distribution of UHMWPE as a bearing material has been investigated for rolling motion. The study was performed by finite element analysis. Several three-dimensional surfaces were created by varying its texture. The texture consists of several cylindrical cavities for certain separation. These surfaces were then rolled by a hard ball indenter. The stress distribution due to the rolling contact for each surface was analyzed. Results show that the surface demonstrates a higher stress distribution for the lower separation between the cylindrical cavities.

UR - https://www.scopus.com/pages/publications/84984586765

U2 - 10.1063/1.4945484

DO - 10.1063/1.4945484

M3 - Conference contribution

AN - SCOPUS:84984586765

T3 - AIP Conference Proceedings

BT - 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015

A2 - Suryana, Risa

A2 - Khairurrijal, null

A2 - Susanto, Heru

A2 - Markusdiantoro, null

A2 - Sutikno, null

A2 - Triyana, Kuwat

PB - American Institute of Physics

T2 - 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015

Y2 - 6 October 2015 through 7 October 2015

ER -

Jamari J, Ismail R, Anwar IB, Saputra E, Tauviqirrahman M, Heide EVD. Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion. In Suryana R, Khairurrijal, Susanto H, Markusdiantoro, Sutikno, Triyana K, editors, 3rd International Conference on Advanced Materials Science and Technology, ICAMST 2015. American Institute of Physics. 2016. 020030. (AIP Conference Proceedings). doi: 10.1063/1.4945484

Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this