Synthesis, characterization, and surface initiated polymerization of carbazole functionalized isocyanides

Erik Schwartz; Eunhee Lim; Chandrakala M. Gowda; Jeroen J.L.M. Cornelissen; Andrea Liscio; Oliver Fenwick; Guoli Tu; Vincenzo Palermo; Rene de Gelder; Ernst R.H. van Eck; Arno P.M. Kentgens; Franco Cacialli; Roeland J.M. Nolte; Paolo Samori; Wilhelm T.S. Huck; Alan E. Rowan

doi:10.1021/cm903664g

Synthesis, characterization, and surface initiated polymerization of carbazole functionalized isocyanides

Erik Schwartz, Eunhee Lim, Chandrakala M. Gowda, Jeroen J.L.M. Cornelissen, Andrea Liscio, Oliver Fenwick, Guoli Tu, Vincenzo Palermo, Rene de Gelder, Ernst R.H. van Eck, Arno P.M. Kentgens, Franco Cacialli, Roeland J.M. Nolte, Paolo Samori, Wilhelm T.S. Huck, Alan E. Rowan

Faculty of Science and Technology

Research output: Contribution to journal › Article › Academic › peer-review

28 Citations (Scopus)

1 Downloads (Pure)

Abstract

We describe the design and synthesis of carbazole functionalized isocyanides and the detailed investigation of their properties. Characterization by solid state NMR, CD, and IR spectroscopic techniques reveals that the polymer has a well-defined helical architecture. Surface-initiated polymerization of the isocyanide monomers onto various surfaces was carried out to give polymer brushes up to 150 nm thick. Insights into the electronic properties of the materials were obtained by Kelvin probe force microscopy (KPFM) and electroabsorption studies

Original language	English
Pages (from-to)	2597-2607
Number of pages	10
Journal	Chemistry of materials
Volume	22
Issue number	8
DOIs	https://doi.org/10.1021/cm903664g
Publication status	Published - 2010

Keywords

n/a OA procedure

Access to Document

10.1021/cm903664g

Cite this

Schwartz, E., Lim, E., Gowda, C. M., Cornelissen, J. J. L. M., Liscio, A., Fenwick, O., Tu, G., Palermo, V., de Gelder, R., van Eck, E. R. H., Kentgens, A. P. M., Cacialli, F., Nolte, R. J. M., Samori, P., Huck, W. T. S., & Rowan, A. E. (2010). Synthesis, characterization, and surface initiated polymerization of carbazole functionalized isocyanides. Chemistry of materials, 22(8), 2597-2607. https://doi.org/10.1021/cm903664g

@article{190dd3d9f02d4448be86240762a35b61,

title = "Synthesis, characterization, and surface initiated polymerization of carbazole functionalized isocyanides",

abstract = "We describe the design and synthesis of carbazole functionalized isocyanides and the detailed investigation of their properties. Characterization by solid state NMR, CD, and IR spectroscopic techniques reveals that the polymer has a well-defined helical architecture. Surface-initiated polymerization of the isocyanide monomers onto various surfaces was carried out to give polymer brushes up to 150 nm thick. Insights into the electronic properties of the materials were obtained by Kelvin probe force microscopy (KPFM) and electroabsorption studies",

keywords = "n/a OA procedure",

author = "Erik Schwartz and Eunhee Lim and Gowda, {Chandrakala M.} and Cornelissen, {Jeroen J.L.M.} and Andrea Liscio and Oliver Fenwick and Guoli Tu and Vincenzo Palermo and {de Gelder}, Rene and {van Eck}, {Ernst R.H.} and Kentgens, {Arno P.M.} and Franco Cacialli and Nolte, {Roeland J.M.} and Paolo Samori and Huck, {Wilhelm T.S.} and Rowan, {Alan E.}",

year = "2010",

doi = "10.1021/cm903664g",

language = "English",

volume = "22",

pages = "2597--2607",

journal = "Chemistry of materials",

issn = "0897-4756",

publisher = "American Chemical Society",

number = "8",

}

Schwartz, E, Lim, E, Gowda, CM, Cornelissen, JJLM, Liscio, A, Fenwick, O, Tu, G, Palermo, V, de Gelder, R, van Eck, ERH, Kentgens, APM, Cacialli, F, Nolte, RJM, Samori, P, Huck, WTS & Rowan, AE 2010, 'Synthesis, characterization, and surface initiated polymerization of carbazole functionalized isocyanides', Chemistry of materials, vol. 22, no. 8, pp. 2597-2607. https://doi.org/10.1021/cm903664g

TY - JOUR

T1 - Synthesis, characterization, and surface initiated polymerization of carbazole functionalized isocyanides

AU - Schwartz, Erik

AU - Lim, Eunhee

AU - Gowda, Chandrakala M.

AU - Cornelissen, Jeroen J.L.M.

AU - Liscio, Andrea

AU - Fenwick, Oliver

AU - Tu, Guoli

AU - Palermo, Vincenzo

AU - de Gelder, Rene

AU - van Eck, Ernst R.H.

AU - Kentgens, Arno P.M.

AU - Cacialli, Franco

AU - Nolte, Roeland J.M.

AU - Samori, Paolo

AU - Huck, Wilhelm T.S.

AU - Rowan, Alan E.

PY - 2010

Y1 - 2010

N2 - We describe the design and synthesis of carbazole functionalized isocyanides and the detailed investigation of their properties. Characterization by solid state NMR, CD, and IR spectroscopic techniques reveals that the polymer has a well-defined helical architecture. Surface-initiated polymerization of the isocyanide monomers onto various surfaces was carried out to give polymer brushes up to 150 nm thick. Insights into the electronic properties of the materials were obtained by Kelvin probe force microscopy (KPFM) and electroabsorption studies

AB - We describe the design and synthesis of carbazole functionalized isocyanides and the detailed investigation of their properties. Characterization by solid state NMR, CD, and IR spectroscopic techniques reveals that the polymer has a well-defined helical architecture. Surface-initiated polymerization of the isocyanide monomers onto various surfaces was carried out to give polymer brushes up to 150 nm thick. Insights into the electronic properties of the materials were obtained by Kelvin probe force microscopy (KPFM) and electroabsorption studies

KW - n/a OA procedure

U2 - 10.1021/cm903664g

DO - 10.1021/cm903664g

M3 - Article

SN - 0897-4756

VL - 22

SP - 2597

EP - 2607

JO - Chemistry of materials

JF - Chemistry of materials

IS - 8

ER -

Synthesis, characterization, and surface initiated polymerization of carbazole functionalized isocyanides

Abstract

Keywords

Access to Document

Fingerprint

Cite this