The influence of material properties and process parameters on the spreading process in additive manufacturing

Research output: Working paperPreprintAcademic

30 Downloads (Pure)

Abstract

Laser powder bed fusion (LPBF) is an additive manufacturing (AM) technology. To achieve high product quality, the powder is best spread as a uniform, dense layer. The challenge for LPBF manufacturers is to develop a spreading process that can produce a consistent layer quality for the many powders used, which show considerable differences in spreadability. Therefore, we investigate the influence of material properties, process parameters and the type of spreading tool on the layer quality. The discrete particle method is used to simulate the spreading process and to define metrics to evaluate the powder layer characteristics. We found that particle shape and surface roughness in terms of rolling resistance and interparticle sliding friction as well as particle cohesion all have a major (sometimes surprising) influence on the powder layer quality: more irregular shaped particles, rougher particle surfaces and/or higher interfacial cohesion usually, but not always, lead to worse spreadability. Our findings illustrate that there is a trade-off between material properties and process parameters. Increasing the spreading speed decreases layer quality for non- and weakly cohesive powders, but improves it for strongly cohesive ones. Using a counter-clockwise rotating roller as a spreading tool improves the powder layer quality compared to spreading with a blade. Finally, for both geometries, a unique correlation between the quality criteria uniformity and mass fraction is reported and some of the findings are related to size-segregation during spreading.
Original languageEnglish
PublisherArXiv.org
Number of pages38
DOIs
Publication statusPublished - 16 Jul 2020

Keywords

  • cond-mat.soft

Fingerprint

Dive into the research topics of 'The influence of material properties and process parameters on the spreading process in additive manufacturing'. Together they form a unique fingerprint.

Cite this