The transition to adhesive wear of lubricated concentrated contacts

Mark van Drogen

The transition to adhesive wear of lubricated concentrated contacts

Mark van Drogen

Research output: Thesis › PhD Thesis - Research UT, graduation UT

142 Downloads (Pure)

Abstract

Validation measurements are carried out by means of pin-on-disk measurements, in which the pin consists of a cylindrical element, resulting in a line contact situation in contact with the disk. For these measurements a special high load pin-on-disk tribotester has been developed. From the experiments can be concluded that the measured transitions are well predicted by the model which is developed in this thesis, in contrast to the calculation models known from literature.

Original language	English
Awarding Institution	University of Twente
Supervisors/Advisors	Schipper, Dirk J., Supervisor
Award date	2 Dec 2005
Place of Publication	Enschede
Publisher	University of Twente
Print ISBNs	978-90-365-2286-1
Publication status	Published - 2 Dec 2005

Access to Document

Thesis M. van Drogen
open
Final published version, 11.4 MB

Fingerprint Dive into the research topics of 'The transition to adhesive wear of lubricated concentrated contacts'. Together they form a unique fingerprint.

Cite this

van Drogen, M. (2005). The transition to adhesive wear of lubricated concentrated contacts. Enschede : University of Twente.

@phdthesis{a8e3a77e3b7645178d5b4aacc7ebd2ee,

title = "The transition to adhesive wear of lubricated concentrated contacts",

abstract = "Validation measurements are carried out by means of pin-on-disk measurements, in which the pin consists of a cylindrical element, resulting in a line contact situation in contact with the disk. For these measurements a special high load pin-on-disk tribotester has been developed. From the experiments can be concluded that the measured transitions are well predicted by the model which is developed in this thesis, in contrast to the calculation models known from literature.",

author = "{van Drogen}, Mark",

year = "2005",

month = "12",

day = "2",

language = "English",

isbn = "978-90-365-2286-1",

publisher = "University of Twente",

address = "Netherlands",

school = "University of Twente",

}

TY - THES

T1 - The transition to adhesive wear of lubricated concentrated contacts

AU - van Drogen, Mark

PY - 2005/12/2

Y1 - 2005/12/2

N2 - Validation measurements are carried out by means of pin-on-disk measurements, in which the pin consists of a cylindrical element, resulting in a line contact situation in contact with the disk. For these measurements a special high load pin-on-disk tribotester has been developed. From the experiments can be concluded that the measured transitions are well predicted by the model which is developed in this thesis, in contrast to the calculation models known from literature.

AB - Validation measurements are carried out by means of pin-on-disk measurements, in which the pin consists of a cylindrical element, resulting in a line contact situation in contact with the disk. For these measurements a special high load pin-on-disk tribotester has been developed. From the experiments can be concluded that the measured transitions are well predicted by the model which is developed in this thesis, in contrast to the calculation models known from literature.

M3 - PhD Thesis - Research UT, graduation UT

SN - 978-90-365-2286-1

PB - University of Twente

CY - Enschede

ER -